2015 scale rules discussion or question thead Please ask any questions here for 2015 SORRCA Scale Rules. Thanks! |
Re: 2015 scale rules discussion or question thead Just to clarify, no knuckle weights in any of the 3 classes? Or is C3 Ok to run em since it's a modified class..? Also if not, then are the Dlux brass knuckles considered illegal since they are a knuckle or..? Thanx dp |
Re: 2015 scale rules discussion or question thead "No Comp style knuckle weights" in any class. And Dlux brass knuckles are not knuckle weights they are knuckles so very legal. |
Re: 2015 scale rules discussion or question thead Right on guy! |
Re: 2015 scale rules discussion or question thead When are the 2015 rules being released? or have I overlooked em somewhere |
Re: 2015 scale rules discussion or question thead Quote:
http://www.rccrawler.com/forum/scale...ale-rules.html |
Re: 2015 scale rules discussion or question thead Thank you. |
Re: 2015 scale rules discussion or question thead The winching rules are missing. |
Re: 2015 scale rules discussion or question thead • No comp style knuckle weights of any kind someone here in Italy adds small pieces of lead on the axles. these should be considered illegal? http://i1322.photobucket.com/albums/...ps8bd5ba85.jpg http://i1322.photobucket.com/albums/...ps74f1e7f2.jpg Thanx |
Re: 2015 scale rules discussion or question thead Quote:
Quote:
|
Re: 2015 scale rules discussion or question thead Quote:
Its legal but some black paint or even tungsten putty inside the case would look better. |
Re: 2015 scale rules discussion or question thead Quote:
Dlux Knuckles are Dlux Knuckles??"thumbsup" |
Re: 2015 scale rules discussion or question thead Quote:
|
Re: 2015 scale rules discussion or question thead What was the ruling on the Ascender "floating" battery tray? I'm not running one but saw it asked someplace else... they guy said he read here that it was Legal. I thought it was ruled Illegal... |
Re: 2015 scale rules discussion or question thead Quote:
|
Re: 2015 scale rules discussion or question thead I do have a concern with the on course point out rule. With most drivers being judged by one judge, the judge will have to do the adding of penalty points as they are judging. That could cause the judge missing someone hitting a gate, using reverse, etc. |
Re: 2015 scale rules discussion or question thead Quote:
|
Re: 2015 scale rules discussion or question thead Quick question on C1 legality for a project I'm working on. Not 100% sure that I'll be going this route, but thought I'd ask to be sure. It's stated that you are allowed to remove a hardtop in C1, but have to have a full windshield - would replacing the stock windshield with something custom fabbed (that still meets dimensions etcetera) remain legal? Here's an example of what I mean (I'm building a different model of unimog, but would be doing the same style of tubework if I were to go this route): http://i20.photobucket.com/albums/b2...ps7bf0824f.jpg Without the windshield on for a better look at the tube/roof removal: http://i20.photobucket.com/albums/b2...pse997356f.jpg again, unsure if I'm going to go this route, but thought I'd ask beforehand. also, multi axle rigs allowed in c1 now? woot! |
Re: 2015 scale rules discussion or question thead Quote:
|
Re: 2015 scale rules discussion or question thead WarPig beat me too it!"thumbsup" Quote:
|
All times are GMT -6. The time now is 05:57 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com