04-20-2017, 12:31 PM | #1 |
Rock Stacker Join Date: Dec 2013 Location: mascot
Posts: 70
| Toyzuki c2
If someone is running a toyzuki chassis, in c2, and running sliders designed for this chassis, would that be boatsides? Because of the angled skid, the body is above the bottom of the frame, just wandering. Searched for info but could not find any. Thanks in advance. Also, if the body cage work has to be 4 1/2" tall would that be measured from the bottom of the body or from the bottom of the skid?
Last edited by moondog rc; 04-20-2017 at 12:33 PM. |
Sponsored Links | |
04-20-2017, 01:49 PM | #2 |
Rock Crawler Join Date: May 2013 Location: Uniontown
Posts: 588
| Re: Toyzuki c2
Boatsides angle upward from the frame to the rockers, which are cut out so the slider is right under to door. Sometimes even the door bottoms are cut depending on the vehicle and builder. Sent from my XT1585 using Tapatalk |
04-20-2017, 09:23 PM | #3 |
I wanna be Dave Join Date: Jan 2004 Location: Austin Texas
Posts: 3,866
| Re: Toyzuki c2
Nope you're good.
|
Toyzuki c2 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ToyZuki G-10...... instructions? | NickDanger | Axial SCX-10 | 8 | 01-25-2017 04:49 PM |
Thread Tools | |
Display Modes | |
| |