Members PTI gallery - Page 2

90xj · 10-29-2007, 10:26 PM

Here's my bmvii clone, pti axled, stealth trannied rig, disregard the body, the previous owner of the original goliath i bought included it and i havent found what i wanna replace it with. But so far I love the torsion chassis, about 3" of belly clearance and does well on ascents and descents and sidehills awesome.

Skeeno · 12-09-2007, 05:59 PM

Some pics from our last comp.

prp1 · 02-27-2008, 07:08 PM

mamba, crawlmaster, rc4wd tires, junfac wheels, gd600, jr ds8711

dasbeermeister · 04-13-2008, 06:41 PM

My stock MMT on some coal and scaling an old strip-mine high wall.

graminizer · 09-30-2008, 08:50 PM

Here it is. I've made a few chassis changes, as well as the 12" extension, Axial beadlocks, Proline hammer tires, Hot Bodies threaded shocks and some custom links are in the works.

http://i521.photobucket.com/albums/w...r/DSC01291.jpg

http://i521.photobucket.com/albums/w...r/DSC01283.jpg

http://i521.photobucket.com/albums/w...r/DSC01289.jpg

http://i521.photobucket.com/albums/w...r/DSC01287.jpg

toned-e94 · 11-22-2008, 02:06 PM

heres my pti.

.
didn't make body mounts yet..

Marc P · 12-13-2008, 07:13 PM

Here is mine...basically stock except the lower links and battery placement.

New Years Day pic.....

kidone · 03-30-2009, 12:10 PM

Here is the updated version of Marc P's Goliath. Bought it off of him and did some upgrades... More pics after phase 2 of upgrades!

zueslilbuddy · 04-20-2009, 09:19 AM

Well got this from freelife04239

Well he kept the Goat out of it and gave me the stock esc, and the stock phase 1 55 turn.

I gotta say I really had to change it up and wanted to do it as cheaply as I could lol

Ok so parts I used were locked pede tranny, custom pede shafts, integy 35turn, old moabs, and some scrap lexan.
Ended up with this.

Ok this set up was a lot better but still had very bad torque twist.

So I started trying some things.

Talk about great articulation set up like this but was a fail.

Here is how its set up now, the best set up so far very little torqur twist and crawls great.

Well thats where it sits rite now lol I've dubed it Junker.

Crawls great now lol

woodnrock · 07-15-2009, 04:42 PM

Here's mine straight from Montana.

jwo · 01-18-2010, 06:54 PM

heres mine from back in the day. sorry pics are small. from my phone. some come out big, some come out small:? finially got around to diggin em out. just call me lazy

-bearing roller wheels on bottom of the chassis
-3/16'' hand built chassis
-m3 2.2 moabs
-hpi narrowed wk rims
-hpi wk gru
-hpi bramba 35t motor
-15t tazer esc
-tq3 modded
-towerpro mg995 servos
-rear steer
-12.5 wb
-bent links
-axial spur
-losi 4'' shocks
-modded steering knuckles
-tmaxx shafts
-2/3a 6 cell saddle packs
-cc bec

pbarsamian · 02-26-2010, 08:05 AM

Here's my mostly complete custom crawler. Only thing really left from the original kit is the axles and the center spool.

http://www.photoshop.com/accounts/5e...7dd49183488cec

http://www.photoshop.com/accounts/5e...9a3292a381b5a2

http://www.photoshop.com/accounts/5e...008f28d249d6bf

http://www.photoshop.com/accounts/5e...e3a29efa9ae058

fordtoys88 · 04-27-2010, 03:22 PM

thought id share a few pics of a dinosaur, and yes i still run it.

crawlinnTN · 05-31-2010, 06:10 PM

Quote:

Originally Posted by jmz6

Here are a few pics of my modded PTI...

a super?

02-27-2008, 07:08 PM	#23
prp1 Newbie Join Date: Dec 2007 Location: tampa Posts: 27	mamba, crawlmaster, rc4wd tires, junfac wheels, gd600, jr ds8711 Last edited by prp1; 05-22-2010 at 04:26 PM.

09-30-2008, 08:50 PM	#25
graminizer Newbie Join Date: Sep 2008 Location: Chilliwack, BC Posts: 3	My PTI Here it is. I've made a few chassis changes, as well as the 12" extension, Axial beadlocks, Proline hammer tires, Hot Bodies threaded shocks and some custom links are in the works. http://i521.photobucket.com/albums/w...r/DSC01291.jpg http://i521.photobucket.com/albums/w...r/DSC01283.jpg http://i521.photobucket.com/albums/w...r/DSC01289.jpg http://i521.photobucket.com/albums/w...r/DSC01287.jpg

11-22-2008, 02:06 PM	#26
toned-e94 Pebble Pounder Join Date: Jul 2008 Location: little egg harbor Posts: 99	heres my pti. . didn't make body mounts yet.. __________________ **WHITE-LOTUS-CRAWLER-TEAM**

12-13-2008, 07:13 PM	#27
Marc P Rock Stacker Join Date: Nov 2008 Location: Santee Posts: 61	Here is mine...basically stock except the lower links and battery placement. New Years Day pic..... __________________ Toys..... AX10 Traxxas Stampede 1.1 1995 4Runner..axle swapped desert beast Last edited by Marc P; 01-01-2009 at 08:01 PM.

02-26-2010, 08:05 AM	#32
pbarsamian Pebble Pounder Join Date: Jan 2010 Location: Glenview Posts: 127	Here's my mostly complete custom crawler. Only thing really left from the original kit is the axles and the center spool. http://www.photoshop.com/accounts/5e...7dd49183488cec http://www.photoshop.com/accounts/5e...9a3292a381b5a2 http://www.photoshop.com/accounts/5e...008f28d249d6bf http://www.photoshop.com/accounts/5e...e3a29efa9ae058 Last edited by pbarsamian; 02-26-2010 at 08:19 AM.

10-29-2007, 10:26 PM	#21
90xj Newbie Join Date: Jan 2007 Location: Taylorsville Posts: 28	Here's my bmvii clone, pti axled, stealth trannied rig, disregard the body, the previous owner of the original goliath i bought included it and i havent found what i wanna replace it with. But so far I love the torsion chassis, about 3" of belly clearance and does well on ascents and descents and sidehills awesome.

04-13-2008, 06:41 PM	#24
dasbeermeister Newbie Join Date: Apr 2008 Location: Appalachia Posts: 4	My stock MMT on some coal and scaling an old strip-mine high wall.

03-30-2009, 12:10 PM	#28
kidone Newbie Join Date: Jan 2009 Location: Bloomingdale Posts: 25	Here is the updated version of Marc P's Goliath. Bought it off of him and did some upgrades... More pics after phase 2 of upgrades!

04-20-2009, 09:19 AM	#29
zueslilbuddy Pebble Pounder Join Date: Jun 2008 Location: The Hills Of Maine Posts: 135	Well got this from freelife04239 Well he kept the Goat out of it and gave me the stock esc, and the stock phase 1 55 turn. I gotta say I really had to change it up and wanted to do it as cheaply as I could lol Ok so parts I used were locked pede tranny, custom pede shafts, integy 35turn, old moabs, and some scrap lexan. Ended up with this. Ok this set up was a lot better but still had very bad torque twist. So I started trying some things. Talk about great articulation set up like this but was a fail. Here is how its set up now, the best set up so far very little torqur twist and crawls great. Well thats where it sits rite now lol I've dubed it Junker. Crawls great now lol

07-15-2009, 04:42 PM	#30
woodnrock Newbie Join Date: Jun 2009 Location: USA Posts: 7	Here's mine straight from Montana.

01-18-2010, 06:54 PM	#31
jwo Quarry Creeper Join Date: Jul 2009 Location: waterville Posts: 499	heres mine from back in the day. sorry pics are small. from my phone. some come out big, some come out small:? finially got around to diggin em out. just call me lazy -bearing roller wheels on bottom of the chassis -3/16'' hand built chassis -m3 2.2 moabs -hpi narrowed wk rims -hpi wk gru -hpi bramba 35t motor -15t tazer esc -tq3 modded -towerpro mg995 servos -rear steer -12.5 wb -bent links -axial spur -losi 4'' shocks -modded steering knuckles -tmaxx shafts -2/3a 6 cell saddle packs -cc bec

04-27-2010, 03:22 PM	#33
fordtoys88 Newbie Join Date: Apr 2009 Location: sterling Posts: 34	my pti goliath thought id share a few pics of a dinosaur, and yes i still run it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links