|
|
11-04-2009, 10:31 PM
|
#1 |
|
Puddle Jumper!
 
Join Date: Oct 2009
Location: Castle Rock
Posts: 46
|
Mech's Axial AX-10 Build to edge AX10
Ok first off thanks for viewing and secondly constructive critisism is always welcome. This is my first build in the crawler side of Rc'ing so bare with me here for I am sure their is plenty that i don't know and some I do ...master of none and crafstmen of all...lol Ok on to the build.
I started off with my AX-10 stock ARTR and well made some changes and such. Currently running : 55t Integy Motor Stock but full droop suspension Hammer Tires Acer Digital DS-1015 Stering Servo 2.2 Mayhem Spider Beadlocks w/ Nuke Plus rings (Thank you Pimpnrocks for the great Deal) Full Locked front and rear Axial Axles XL-5 Traxxas ESC (water resistant) and running a Spektrum DSM2.4ghz system for radio Edge Chassis( thanks to Gary thanks for the great deal also!) Now this build isn't complete as of yet I still have a few things I am waiting to get 4 link plates are in the mail, Dig unit wich I will have to wait till I can afford one, and misc. things that will have to wait. but this is so far...lol. Here we go I'll let the pics speak for them selves!  sorry for the pics being all over but the uploader didn't like photo bucket's presets so....
__________________
1-AX10 ARTR one Betty AX10, Himoto 1/10th ,Losi LST2 1/8, T-Maxx.-USCG Retired While I thought that I was learning how to live, I have been learning how to die. Leonardo da Vinci Last edited by Mechinary; 11-04-2009 at 11:14 PM. |
|
|
| Sponsored Links | |
|
|
|
|
11-04-2009, 10:33 PM
|
#2 |
|
Puddle Jumper!
Join Date: Oct 2009
Location: Castle Rock
Posts: 46
|
This is what I originally started with of course most of you know but maybe for those that don't here it is!
__________________
1-AX10 ARTR one Betty AX10, Himoto 1/10th ,Losi LST2 1/8, T-Maxx.-USCG Retired While I thought that I was learning how to live, I have been learning how to die. Leonardo da Vinci |
|
|
|
|
11-05-2009, 06:13 AM
|
#3 |
|
Pebble Pounder
Join Date: Aug 2009
Location: Gamecock Country
Posts: 164
|
Very nice! I love that hammered paint. Great start.
|
|
|
|
|
11-06-2009, 10:46 AM
|
#4 |
|
Puddle Jumper!
Join Date: Oct 2009
Location: Castle Rock
Posts: 46
|
thank you
 I know it's nothing special and has been done again and again but hey I'm new and well can't afford to dish out the dollars for the chassis I really want so figure i'll start small and work my way up...lol
__________________
1-AX10 ARTR one Betty AX10, Himoto 1/10th ,Losi LST2 1/8, T-Maxx.-USCG Retired While I thought that I was learning how to live, I have been learning how to die. Leonardo da Vinci |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
