Super 300 CVD's - Page 13

joesbruiser · 10-30-2009, 04:47 PM

Quote:

Originally Posted by jcboof

Just got em today!! They seem to bind up a bit in certain positions, Maybe they just need broken in?

Look good otherwise!

IF you read around a little they do have to be broke in.
There is a certain way to do it.
They are machined really tight to avoid slop after the break in.

Failedabortion · 11-01-2009, 12:14 PM

Ordered mine on the 20th also, still not here...Maybe I'll stick with tcs from now on...

666 · 11-01-2009, 12:18 PM

Quote:

Originally Posted by Failedabortion

Ordered mine on the 20th also, still not here...Maybe I'll stick with tcs from now on...

Not sure anyone would use anyone but TCS, they are the best!

jcboof · 11-01-2009, 07:24 PM

Quote:

Originally Posted by joesbruiser

IF you read around a little they do have to be broke in.
There is a certain way to do it.
They are machined really tight to avoid slop after the break in.

Greased em up and ran about 1/2 pack through them and they are nice and smoooooooth now!! I tried and tried to break em today and i ended up breaking 3rd gear and a rear stub!!! Guess i'll stop trying to break things now and just drive!!

Also, Doesn't this same guy make a rear axle kit too with the 6mm shafts???

Cruzin Illusion · 11-01-2009, 07:28 PM

Quote:

Originally Posted by jcboof

Also, Doesn't this same guy make a rear axle kit too with the 6mm shafts???

RC Axle Master sells the rear 6mm straight axle kits. You can pick them up at RPP Hobbies another great vendor on the forum.

jcboof · 11-01-2009, 07:45 PM

Quote:

Originally Posted by Cruzin Illusion

RC Axle Master sells the rear 6mm straight axle kits. You can pick them up at RPP Hobbies another great vendor on the forum.

Gotcha!! Thanks!!

JamisonWorkshop · 11-03-2009, 07:35 AM

Any word on when these are getting out to Vendors. Anxiously waiting.

whoodie · 11-03-2009, 07:46 AM

Quote:

Originally Posted by JamisonWorkshop

Any word on when these are getting out to Vendors. Anxiously waiting.

TCS sent mine last week, I preordered though.

JamisonWorkshop · 11-03-2009, 08:53 AM

Ya I preordered on the 25th.

miniwheeler · 11-04-2009, 11:11 PM

I can say that a pyle of 300m goodness is building at the cnc shop. lots of ax-10 outer stubs are made and things are geting ready to go to heat treat. Super Dave is trying to get enough parts done ahead of time so he can start makeing shafts for other cars.

Failedabortion · 11-05-2009, 02:40 AM

Quote:

Originally Posted by 666

Not sure anyone would use anyone but TCS, they are the best!

Ya I know, It was a matter of saving $15...

Still don't have them in my hands yet either...

rentstdi · 11-05-2009, 06:55 AM

Quote:

Originally Posted by miniwheeler

I can say that a pyle of 300m goodness is building at the cnc shop. lots of ax-10 outer stubs are made and things are geting ready to go to heat treat. Super Dave is trying to get enough parts done ahead of time so he can start makeing shafts for other cars.

Does this mean that there might new axles for the ax10 available soon.

trucknuts · 11-05-2009, 07:57 AM

Quote:

Originally Posted by Failedabortion

Ya I know, It was a matter of saving $15...

Still don't have them in my hands yet either...

Well, look at the bright side. You can use that $15 to buy a box of Kleenex Tissues to wipe your tears off of the keyboard.

Cruzin Illusion · 11-05-2009, 08:23 AM

Is there a date on when they will be shipped to the vendors?

Shockem · 11-05-2009, 09:24 AM

Quote:

Originally Posted by 666

Not sure anyone would use anyone but TCS, they are the best!

Haven't tried out TCS yet , but CKRC is great to deal with. Jake Hallenbeck is one of rc crawlings' best drivers, just for some of those out there that haven't used them yet. I like to spread the wealth around and have been looking at spending some dough at TCS!

Failedabortion · 11-05-2009, 12:10 PM

Quote:

Originally Posted by trucknuts

Well, look at the bright side. You can use that $15 to buy a box of Kleenex Tissues to wipe your tears off of the keyboard.

Good thing my laptop has a waterproof keyboard...

bigflex · 11-05-2009, 10:21 PM

Quote:

Originally Posted by Shockem

Haven't tried out TCS yet , but CKRC is great to deal with. Jake Hallenbeck is one of rc crawlings' best drivers, just for some of those out there that haven't used them yet. I like to spread the wealth around and have been looking at spending some dough at TCS!

Once you buy from TCS you will by a loyal customer of theres from then on.

Best vendor ever.

jcboof · 11-06-2009, 04:24 AM

TCS is awesome, I got my CVD's 2 days after I recieved a shipping notice. They are fast and fair, I've had some problems with the other. Lots of others have too. Don't want to say anything bad, But there is a reason I'll keep spending my $$ with TCS. They are a Flat Out Good and Reputable company that takes care of their customers!

JamisonWorkshop · 11-06-2009, 07:26 AM

Still looking for word on ETA. Anything ????

hoppa · 11-07-2009, 08:06 PM

Quote:

Originally Posted by JamisonWorkshop

Still looking for word on ETA. Anything ????

X3

11-01-2009, 12:14 PM	#242
Failedabortion Fawked Join Date: Feb 2009 Location: Surprise, Az Posts: 614	Ordered mine on the 20th also, still not here...Maybe I'll stick with tcs from now on... __________________ www.AzParc.com The Crawler store

11-03-2009, 07:35 AM	#247
JamisonWorkshop Quarry Creeper Join Date: Jun 2005 Location: Maryland Posts: 207	Any word on when these are getting out to Vendors. Anxiously waiting. __________________ Scorpion killer Berg 2.2 comp rig Landcruiser 1.9 scaler

11-03-2009, 08:53 AM	#249
JamisonWorkshop Quarry Creeper Join Date: Jun 2005 Location: Maryland Posts: 207	Ya I preordered on the 25th. __________________ Scorpion killer Berg 2.2 comp rig Landcruiser 1.9 scaler

11-04-2009, 11:11 PM	#250
miniwheeler Rock Crawler Join Date: Nov 2005 Location: dallas Posts: 733	I can say that a pyle of 300m goodness is building at the cnc shop. lots of ax-10 outer stubs are made and things are geting ready to go to heat treat. Super Dave is trying to get enough parts done ahead of time so he can start makeing shafts for other cars. __________________ TEAM TCS TEAM MSD DRIVER TEAM CHEAP BATTERY PACKS

11-05-2009, 08:23 AM	#254
Cruzin Illusion Cruzin Illusion Customs Join Date: Jan 2009 Location: Commerce City Posts: 359	Is there a date on when they will be shipped to the vendors? __________________ Champions Don't Talk They Perform *Vanquish Team Driver* *RC Axle Master Team Driver*

11-06-2009, 04:24 AM	#258
jcboof Amishland Crawler Join Date: Oct 2008 Location: Topeka, IN Posts: 331	TCS is awesome, I got my CVD's 2 days after I recieved a shipping notice. They are fast and fair, I've had some problems with the other. Lots of others have too. Don't want to say anything bad, But there is a reason I'll keep spending my $$ with TCS. They are a Flat Out Good and Reputable company that takes care of their customers! __________________ Team Mayhem www.mayhemengineering.com Billet Works Design XIRTIC - Remote Control Rock Crawling Products Michigan State 2.2 1st Place Indiana State 2.2 5th Place

11-06-2009, 07:26 AM	#259
JamisonWorkshop Quarry Creeper Join Date: Jun 2005 Location: Maryland Posts: 207	Still looking for word on ETA. Anything ???? __________________ Scorpion killer Berg 2.2 comp rig Landcruiser 1.9 scaler

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links