~T1E MoonBULLY~

53 willys · 11-02-2009, 08:29 PM

well I could not resist the bodiless craze any longer...I picked up a T1E Rockshow Moonbuggy Chassis and I'm gonna build it from my older comp rig...it's gonna be my son and wifes comp rig..here are the specs on this build...I'm really looking foward to this one....

T1E RockShow Moonbuggy WITH battery tray
T1E High Clearance lower rear links
Bully 2's with V4 XVD's
35T Banzai Motors
HS7955TG
Rc4WD Steering kit
FXR
Punk Dig
CC BEC@6.0
HPI 3.5 shocks up front
HPI 4.0 shocks out back
RC4WD Lowboyz Beadlocks(RC4WD X-locks~White Rovers~Leopards)
RC4WD tire foams

pics tomorrow......

BOWTIE · 11-02-2009, 08:37 PM

nice list...

looking forward to seeing the pics..

McTwist · 11-02-2009, 08:41 PM

Can't wait to see how it turns out.

53 willys · 11-02-2009, 09:07 PM

Quote:

Originally Posted by BOWTIE

nice list...

looking forward to seeing the pics..

all you T1E moonberggy guys in the Berg section made me do it!!!

TURBOFEST · 11-03-2009, 06:54 AM

Sweet!!....You won't be disappointed!

atekt · 11-03-2009, 07:14 AM

Bodiless rigs pshhhh who runs those

Cant wait to see it man, too bad you wont be in wendover!

crashfab · 11-03-2009, 03:37 PM

pics pics pics

Krakker · 11-03-2009, 07:58 PM

It be 2 morra, me see no pics??? U B slackin'.

If it's going to be their rig, make them do some of the work and pic taken.

53 willys · 11-04-2009, 10:22 AM

sorry dudes....I had a comp yesterday and ended up doing so tweaking on my comp rig...I do have it as a roller at this point..but I just went to take pics and BOTH my digi cam battery's are dead..

battery's are charging now...pics in a couple hours.

I know I'm slacking...I hate when people do builds and then don't post pics

53 willys · 11-04-2009, 01:26 PM

I was able to pretty much just unbolt the old chassis and bolt the new T1E MoonBully chassis right up to my V2 Bully axles.
I think I have some more link tuning to do but for the most part I like where it's at right now..so I will run it and tune from there.

3.75" at the rear skid..battery seems to come in and out just fine...just gotta get some electronics stuffed in there and figure out what the heck I'm gonna do for body panels..?
I pretty much made the links I had laying around work by adding long Jato rod ends and adjusting them to length...it's just under 12.5" as it sits right now..

RCROCIN' · 11-04-2009, 03:41 PM

Looks good bro

Moon buggies are so hot right now!!

Krakker · 11-04-2009, 07:56 PM

That thing's Buggin!

Looks challenging from the pics I see to mount the electronics. Good luck.

BOWTIE · 11-04-2009, 07:57 PM

c'mon man get that thing on the rocks!!!!

TC09minilosi · 11-04-2009, 10:46 PM

Moon buggy certainly is the right name for that thing! haha love it!

Jeepial · 11-04-2009, 11:13 PM

Quote:

Originally Posted by BOWTIE

c'mon man get that thing on the rocks!!!!

Yah,no joke...

..Looking good though..

53 willys · 11-05-2009, 08:40 AM

Quote:

Originally Posted by Krakker

It be 2 morra, me see no pics??? U B slackin'.

If it's going to be their rig, make them do some of the work and pic taken.

Quote:

Originally Posted by Krakker

That thing's Buggin!

Looks challenging from the pics I see to mount the electronics. Good luck.

my son helped with the build....but my wife is not real big on the building part...she likes to drive...but wants me to keep it running..haha I dont mind though.

the electronics were not that bad really....

Quote:

Originally Posted by BOWTIE

c'mon man get that thing on the rocks!!!!

I just need body panels now and it's ready for the rocks.....

53 willys · 11-05-2009, 09:04 AM

got the electronics all mounted up!!
it was not as bad as I thought it was gonna be...it's a tight fit but it fits well and should be totally hidden by the skins.

built a real small lexan plate for the FXR to sit on...the punk dig..CC BEC all fit perfect inside the moonbuggy chassis skid!

I also built a real small lexan plate for the RX..it's mounted upside down on the rear of the chassis.

you can see the small FXR mount from the underside shot.
(now that I look closer the FXR plate is kinda hard to see.....I used the single countersunk bolt to attach the plate..I will try and get a better shot when I get the skin pics......

I still need to order the Banzai 35T's...so I still have the 55t Integys I had on my sons old rig.

JeremyH · 11-05-2009, 02:01 PM

Looking good! I'm still amazed at the close shave you gave those axles! Did you make sure to use blam afterward?

53 willys · 11-05-2009, 02:43 PM

Quote:

Originally Posted by JeremyH

Looking good! I'm still amazed at the close shave you gave those axles! Did you make sure to use blam afterward?

thanks bud...hey their was some razor burn at first......but now it's just rock rash..lol

11-02-2009, 08:29 PM	#1
53 willys ~just Trying Something~ Join Date: Jan 2009 Location: Utah Posts: 846	~T1E MoonBULLY~ well I could not resist the bodiless craze any longer...I picked up a T1E Rockshow Moonbuggy Chassis and I'm gonna build it from my older comp rig...it's gonna be my son and wifes comp rig..here are the specs on this build...I'm really looking foward to this one.... T1E RockShow Moonbuggy WITH battery tray T1E High Clearance lower rear links Bully 2's with V4 XVD's 35T Banzai Motors HS7955TG Rc4WD Steering kit FXR Punk Dig CC BEC@6.0 HPI 3.5 shocks up front HPI 4.0 shocks out back RC4WD Lowboyz Beadlocks(RC4WD X-locks~White Rovers~Leopards) RC4WD tire foams pics tomorrow...... __________________ RC4WD Team Driver Fubar Crawlers Team Driver Mayhem Engineering UTRCRC.com 801rcc.com Last edited by 53 willys; 11-02-2009 at 10:07 PM.

11-02-2009, 08:37 PM	#2
BOWTIE --Team CPC-- Join Date: Aug 2005 Location: San Antonio Posts: 1,981	nice list... looking forward to seeing the pics.. __________________ CompProCrawlers T1E

11-02-2009, 08:41 PM	#3
McTwist NTXRCC Join Date: Nov 2008 Location: Texas Posts: 53	Can't wait to see how it turns out. __________________ McTwist

11-03-2009, 06:54 AM	#5
TURBOFEST WHITE LOTUS TERROR SQUAD Join Date: Aug 2007 Location: JERSEY BOONDOCKS Posts: 704	Sweet!!....You won't be disappointed! __________________ TEAM TCS TEAM WHITE LOTUS RC4WD TEAM DRIVER GSRCRC 2008 & 2009 2.2 & SUPER CLASS CHAMP! ECC09:2nd in Super & 6th in 2.2 WORLDS09:2nd(ish) in Super

11-03-2009, 07:14 AM	#6
atekt Quarry Creeper Join Date: Sep 2008 Location: Utah Posts: 450	Bodiless rigs pshhhh who runs those Cant wait to see it man, too bad you wont be in wendover! __________________ 801RCC.COM TEAM NOV-VISS

11-03-2009, 03:37 PM	#7
crashfab Its CRASH!!!!! Join Date: Dec 2005 Location: Gold Bar Posts: 1,148	pics pics pics __________________ WARCRC - home of Randy Storm, the true super class world champ Mike CrashKash Crashfab Shopcam

11-03-2009, 07:58 PM	#8
Krakker "FORCE 10-FAB" Join Date: Nov 2008 Location: In the Middle of it all. Posts: 499	It be 2 morra, me see no pics??? U B slackin'. If it's going to be their rig, make them do some of the work and pic taken. __________________ If you DON'T want it BROKE, DON'T let me drive it!!! Christian Off Roaders Association: CORA USA www.corausa.org We support offroading and family values. Help us help others. FORCE-10 FAB

11-04-2009, 10:22 AM	#9
53 willys ~just Trying Something~ Join Date: Jan 2009 Location: Utah Posts: 846	sorry dudes....I had a comp yesterday and ended up doing so tweaking on my comp rig...I do have it as a roller at this point..but I just went to take pics and BOTH my digi cam battery's are dead.. battery's are charging now...pics in a couple hours. I know I'm slacking...I hate when people do builds and then don't post pics __________________ RC4WD Team Driver Fubar Crawlers Team Driver Mayhem Engineering UTRCRC.com 801rcc.com

11-04-2009, 01:26 PM	#10
53 willys ~just Trying Something~ Join Date: Jan 2009 Location: Utah Posts: 846	I was able to pretty much just unbolt the old chassis and bolt the new T1E MoonBully chassis right up to my V2 Bully axles. I think I have some more link tuning to do but for the most part I like where it's at right now..so I will run it and tune from there. 3.75" at the rear skid..battery seems to come in and out just fine...just gotta get some electronics stuffed in there and figure out what the heck I'm gonna do for body panels..? I pretty much made the links I had laying around work by adding long Jato rod ends and adjusting them to length...it's just under 12.5" as it sits right now.. __________________ RC4WD Team Driver Fubar Crawlers Team Driver Mayhem Engineering UTRCRC.com 801rcc.com

11-04-2009, 03:41 PM	#11
RCROCIN' Big Boulder Join Date: Dec 2008 Location: Lansdale Posts: 39	Looks good bro Moon buggies are so hot right now!!

11-04-2009, 07:56 PM	#12
Krakker "FORCE 10-FAB" Join Date: Nov 2008 Location: In the Middle of it all. Posts: 499	That thing's Buggin! Looks challenging from the pics I see to mount the electronics. Good luck. __________________ If you DON'T want it BROKE, DON'T let me drive it!!! Christian Off Roaders Association: CORA USA www.corausa.org We support offroading and family values. Help us help others. FORCE-10 FAB

11-04-2009, 07:57 PM	#13
BOWTIE --Team CPC-- Join Date: Aug 2005 Location: San Antonio Posts: 1,981	c'mon man get that thing on the rocks!!!! __________________ CompProCrawlers T1E

11-04-2009, 10:46 PM	#14
TC09minilosi Rock Stacker Join Date: Jul 2009 Location: Natchitoches, LA / Palmyra, NY Posts: 61	Moon buggy certainly is the right name for that thing! haha love it!

11-05-2009, 09:04 AM	#17
53 willys ~just Trying Something~ Join Date: Jan 2009 Location: Utah Posts: 846	got the electronics all mounted up!! it was not as bad as I thought it was gonna be...it's a tight fit but it fits well and should be totally hidden by the skins. built a real small lexan plate for the FXR to sit on...the punk dig..CC BEC all fit perfect inside the moonbuggy chassis skid! I also built a real small lexan plate for the RX..it's mounted upside down on the rear of the chassis. you can see the small FXR mount from the underside shot. (now that I look closer the FXR plate is kinda hard to see.....I used the single countersunk bolt to attach the plate..I will try and get a better shot when I get the skin pics...... I still need to order the Banzai 35T's...so I still have the 55t Integys I had on my sons old rig. __________________ RC4WD Team Driver Fubar Crawlers Team Driver Mayhem Engineering UTRCRC.com 801rcc.com

11-05-2009, 02:01 PM	#18
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 4,562	Looking good! I'm still amazed at the close shave you gave those axles! Did you make sure to use blam afterward? __________________ Team Wheel Works Give a man a match and he will be warm for a minute, Light a man on fire and he will be warm for the rest of his life.

Sponsored Links

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode