*****CDW LS2.0 Proto Chassis Build*****

yotachump · 10-24-2008, 01:20 PM

Crawler Design Works LS2.0 Proto chassis designed for 4" shocks:-P

.....

chip cross · 10-24-2008, 01:27 PM

Looks like a winner, will a Cobalt fit in it ?

helhedded · 10-24-2008, 01:29 PM

it looks awesome!

will there be any testers?

yotachump · 10-24-2008, 01:59 PM

Quote:

Originally Posted by chip cross

Looks like a winner, will a Cobalt fit in it ?

Thanks....Ill see if a puller will fit in it later today.

Quote:

Originally Posted by helhedded

it looks awesome!

will there be any testers?

Thanks.....Of course there will be testers.

bigflex · 10-24-2008, 05:54 PM

looks nice! From the pics it looks like it would be a tight fit but doable for a Puller! I hope I am right.

bcrofts · 10-24-2008, 06:32 PM

this looks sweet

axman2010 · 10-24-2008, 06:53 PM

I already want one!

gewaun · 10-24-2008, 06:56 PM

Looks killer can't wait to see more, hurry up!

Robbob · 10-24-2008, 07:10 PM

smooth design, could be the frame that breaks me off of always running droop setups

dpdsurf · 10-24-2008, 07:15 PM

Man I wish I would have known

I just picked up an SWX as I just decided to start another build so I can have a droop rig (CDW 1.0) and a sprung rig.

Another great looking chassis Anthony

666 · 10-24-2008, 07:24 PM

Me being the chassis critic I am, looks a bit prone to bending on the open sided plate where the lowest upper link mount hole is. Can you make both plates closed on top? How thick and what kind of material is it?

Besides that....

gewaun · 10-24-2008, 09:07 PM

Paypal finger itchy, how much for this puppy?

yotachump · 10-24-2008, 09:25 PM

Quote:

Originally Posted by bigflex

looks nice! From the pics it looks like it would be a tight fit but doable for a Puller! I hope I am right.

I tried to get a puller to fit and it was TIGHT with OUT a slipper. if you want to run a 84t spur it should be no problem.

Quote:

Originally Posted by bcrofts

this looks sweet

Thanks

Quote:

Originally Posted by axman2010

I already want one!

Quote:

Originally Posted by gewaun

Looks killer can't wait to see more, hurry up!

Thanks, ill have more pics tomorrow...:-P

Quote:

Originally Posted by Robbob

smooth design, could be the frame that breaks me off of always running droop setups

Thanks..

Quote:

Originally Posted by dpdsurf

Man I wish I would have known

I just picked up an SWX as I just decided to start another build so I can have a droop rig (CDW 1.0) and a sprung rig.

Another great looking chassis Anthony

You can always return the SWX....

Quote:

Originally Posted by 666

Me being the chassis critic I am, looks a bit prone to bending on the open sided plate where the lowest upper link mount hole is. Can you make both plates closed on top? How thick and what kind of material is it?

Besides that....

I don't think it should be a problem, it is about .335" thick right there and is laser cut from 1/8" 6061 T-6..... you could run 2 closed sides if you want to run a 84t spur.....Thanks

Quote:

Originally Posted by gewaun

Paypal finger itchy, how much for this puppy?

Price will be posted in the vendors section after a bit of testing...I will tell you it will be the same price as my other chassis.

gewaun · 10-24-2008, 09:36 PM

Coool test away!

Brandon · 10-24-2008, 11:33 PM

Looks good! Cant wait

drumbeater · 10-24-2008, 11:37 PM

Quote:

Originally Posted by Nluvwithxlr8ing

Looks good! Cant wait

Let's see who builds theirs first.

A_Jeeper · 10-24-2008, 11:39 PM

looks very nice!

yotachump · 10-25-2008, 08:38 AM

Quote:

Originally Posted by Nluvwithxlr8ing

Looks good! Cant wait

Quote:

Originally Posted by drumbeater

Let's see who builds theirs first.

Thanks.....

Quote:

Originally Posted by nathanlima

looks very nice!

Thanks.

helhedded · 10-25-2008, 09:13 AM

done yet?

bigflex · 10-25-2008, 09:42 AM

So when can I excpect mine to get here?

10-24-2008, 01:20 PM	#1
yotachump AKA Crawler Design Works Join Date: Sep 2007 Location: Bay Area,CA Posts: 2,242	***CDW LS2.0 Proto Chassis Build* Crawler Design Works LS2.0 Proto chassis designed for 4" shocks:-P..... __________________ Team CDW Crawler Design Works** CDW Berg CDW Chump Chassis CDW Chump Sticks

10-24-2008, 05:54 PM	#5
bigflex TEAM BWD Join Date: Jun 2005 Location: ETXRCC Pres. Posts: 2,452	looks nice! From the pics it looks like it would be a tight fit but doable for a Puller! I hope I am right. __________________ Team BWD Driver Team Anger Inc. Driver Team Jwalker Designs Driver Team Crawler InNOVAtions driver Holmes Hobbies TCS

10-24-2008, 06:32 PM	#6
bcrofts TEAM RCC Join Date: Jul 2006 Location: Novato Posts: 1,458	this looks sweet __________________ TEAM RCC DRIVER VANQUISH TEAM DRIVER HATER TIRES

10-24-2008, 07:10 PM	#9
Robbob RCC Addict Join Date: Oct 2007 Location: chained to the bench wishing there was just 1 more hour in a day Posts: 1,453	smooth design, could be the frame that breaks me off of always running droop setups __________________ 2.2 Big Tex Build 2.2 Fun Buggy Build 1.9 Little Run FJ

10-24-2008, 07:15 PM	#10
dpdsurf RCC Addict Join Date: Mar 2008 Location: Pacifica, CA Posts: 1,504	Man I wish I would have known I just picked up an SWX as I just decided to start another build so I can have a droop rig (CDW 1.0) and a sprung rig. Another great looking chassis Anthony Last edited by dpdsurf; 10-24-2008 at 07:19 PM.

10-24-2008, 01:29 PM	#3
helhedded ************** Join Date: Nov 2007 Location: Memphis Posts: 2,355	it looks awesome! will there be any testers?

10-24-2008, 06:53 PM	#7
axman2010 Rock Crawler Join Date: Sep 2008 Location: Portland Posts: 545	I already want one!

10-24-2008, 06:56 PM	#8
gewaun Pebble Pounder Join Date: Aug 2008 Location: San Diego Posts: 162	Looks killer can't wait to see more, hurry up!

10-24-2008, 07:24 PM	#11
666 Friend Join Date: Nov 2005 Location: 9200' Posts: 8,450	Me being the chassis critic I am, looks a bit prone to bending on the open sided plate where the lowest upper link mount hole is. Can you make both plates closed on top? How thick and what kind of material is it? Besides that.... __________________ PTFO Captain Having fun! PRO...what? Machine Gun Man

10-24-2008, 09:07 PM	#12
gewaun Pebble Pounder Join Date: Aug 2008 Location: San Diego Posts: 162	Paypal finger itchy, how much for this puppy?

10-24-2008, 09:36 PM	#14
gewaun Pebble Pounder Join Date: Aug 2008 Location: San Diego Posts: 162	Coool test away!

10-24-2008, 11:33 PM	#15
Brandon Axial Team Driver Join Date: Feb 2005 Location: OC Posts: 6,437	Looks good! Cant wait __________________ Axial Team RCC --- Axial Team Driver --- Team Futaba --- Team MaxAmps

10-24-2008, 11:39 PM	#17
A_Jeeper Patterson Crawler Join Date: Jul 2007 Location: Patterson Posts: 437	looks very nice! __________________ CAUTION Slow Builder.

10-25-2008, 09:13 AM	#19
helhedded ************** Join Date: Nov 2007 Location: Memphis Posts: 2,355	done yet?

10-25-2008, 09:42 AM	#20
bigflex TEAM BWD Join Date: Jun 2005 Location: ETXRCC Pres. Posts: 2,452	So when can I excpect mine to get here? __________________ Team BWD Driver Team Anger Inc. Driver Team Jwalker Designs Driver Team Crawler InNOVAtions driver Holmes Hobbies TCS

Sponsored Links

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode