Venom Creeper Picture Thread

666 · 01-06-2009, 05:58 PM

Post pics and info of your Venom Creeper!! Chit chatting will be deleted and the culprit will be injected with Venom! :-P

werty · 01-07-2009, 07:12 PM

renegade79 · 01-12-2009, 04:25 PM

My Creeper build so far. I am still awaiting new servos for the remote locking diffs and rear steer servo plate. When the dig unit comes out I'll get one of them also. Tekin FX-R esc and matching 55T motor. I'm using a DX6i controller. Comments welcome!!

Stevek · 01-16-2009, 09:22 PM

1\4elliptic toy · 01-20-2009, 10:31 AM

Here is a couple of mine

Kootenai Krawle · 01-30-2009, 06:26 PM

Ready to Crawl....makin' a good door stop right now.

Olli23 · 02-03-2009, 01:05 PM

Here is mine:

It run with a Integy 55t & Losi MRC ESC, 2s Lipo, Liposaver and Ubec.

Oliver

Louis · 02-04-2009, 03:11 PM

Well here is my Creeper, I just finished painting the body, you cant really see the gold flake in it, but she looks real nice. I was so anxious to get pics up i forgot to put all my stickers on.
(((It Has)))
Novak GTB S-Spectrum
Team Orion 4800LiPo
Hot Bodies Long Stroke Shocks (stoll off my truggy) :(
Hitec 5955TG Servo (stoll of my MT) :(
Welded diffs
Droop Setup
Orion Vortex 3.5 Brushless (high turn but geared SUPER low, Produces alota torque, enough to break the metal outputs)
9Tooth Pinion
48Spur Gear
DX3
Weighted front rims, stared foam all around.
(((Soon Upgrades)))

MIP Drive shafts from ThunderTech
Rear Stear
Tube Chassis

I love how long the front shock is^^^
I even cleaned up my tired

Im going to be building a huge rock pile in my back yard real soon

Also, for more clearance flip your bottom links over!!

The Crawler on my dead toyota, I blew the motor in it one day when it was -3. BEWARE OF REDLINE OIL!
I will be installing dual 4links on my yota real soon once i put a new motor in her

I could only find one soda can, so i had to use my Old Spice can XD

kasper · 02-09-2009, 07:16 AM

here is mine

smashmetal · 02-09-2009, 03:21 PM

some poser shots............

New frame and some rubber

username · 02-10-2009, 06:52 PM

early remote lockout setup, subject to change at anytime.

King of the Kitchen!

thats all for now!

klip · 02-10-2009, 10:13 PM

http://i604.photobucket.com/albums/t...creeper015.jpg
http://i604.photobucket.com/albums/t...creeper016.jpg
http://i604.photobucket.com/albums/t...creeper017.jpg

bondo303 · 02-14-2009, 03:40 PM

Here is mine. No electronics yet, just a roller.

catcrawler · 02-15-2009, 02:06 PM

catcrawler · 02-15-2009, 02:09 PM

m&mkrawler · 02-20-2009, 06:40 PM

psychosammi · 02-20-2009, 10:54 PM

rockintheriver · 02-23-2009, 09:10 AM

Finally got a good pic of my Creeper. Thanks to Racer-x for taking and posting the picture

Basic setup Integy 55t lathe motor, Mamba Micro Pro, and of course HB Rovers.

yjjoyride · 02-23-2009, 07:27 PM

Madpete98 · 02-24-2009, 12:14 AM

First day out.........broke nothing and had a blast!

Swapped to HB 'Rovers' and it floats up things, i've flipped the shocks upside down to lower the C of G, they work perfect like this, no binding or reduction in effect of droop/sprung setup.

bestones

mp

;)

01-06-2009, 05:58 PM	#1
666 Colorado Join Date: Nov 2005 Location: 8600' Posts: 8,574	Venom Creeper Picture Thread Post pics and info of your Venom Creeper!! Chit chatting will be deleted and the culprit will be injected with Venom! :-P __________________ B.L.S. Clod for life!

01-07-2009, 07:12 PM	#2
werty Quarry Creeper Join Date: May 2008 Location: Dayton Posts: 299	__________________ LOSI CC dual motor setup, Axail Reign chassis, Himoto mt10 [FONT="Comic Sans MS"][COLOR="Lime"][B][I]If you didn't build it with your own hands its not yours! You know whats great about new underwear? No one else has worn them.[/I][/B][/COLOR][/FONT]

01-16-2009, 09:22 PM	#4
Stevek Newbie Join Date: Jan 2009 Location: Kelowna Posts: 26	Last edited by Stevek; 01-17-2009 at 03:49 PM.

01-30-2009, 06:26 PM	#6
Kootenai Krawle Newbie Join Date: Dec 2008 Location: Spokane Posts: 21	Ready to Crawl....makin' a good door stop right now. __________________ Overconfidence - Before you attempt to beat the odds, be sure you can survive the odds beating you

02-09-2009, 07:16 AM	#9
kasper Team Hardkor Crawlers Join Date: Jul 2008 Location: appleton Posts: 1,619	here is mine __________________ Team Hardkor Crawlers kaspers lower level rock lounge WiRCRC www.mikescycle-wi.com Four Bergs a Bully and a XR-10

02-03-2009, 01:05 PM	#7
Olli23 Newbie Join Date: Apr 2008 Location: Germany Posts: 15	Here is mine: It run with a Integy 55t & Losi MRC ESC, 2s Lipo, Liposaver and Ubec. Oliver

02-04-2009, 03:11 PM	#8
Louis Rock Stacker Join Date: Jan 2009 Location: Eagle, Idaho Posts: 53	Well here is my Creeper, I just finished painting the body, you cant really see the gold flake in it, but she looks real nice. I was so anxious to get pics up i forgot to put all my stickers on. (((It Has))) Novak GTB S-Spectrum Team Orion 4800LiPo Hot Bodies Long Stroke Shocks (stoll off my truggy) :( Hitec 5955TG Servo (stoll of my MT) :( Welded diffs Droop Setup Orion Vortex 3.5 Brushless (high turn but geared SUPER low, Produces alota torque, enough to break the metal outputs) 9Tooth Pinion 48Spur Gear DX3 Weighted front rims, stared foam all around. (((Soon Upgrades))) MIP Drive shafts from ThunderTech Rear Stear Tube Chassis I love how long the front shock is^^^ I even cleaned up my tired Im going to be building a huge rock pile in my back yard real soon Also, for more clearance flip your bottom links over!! The Crawler on my dead toyota, I blew the motor in it one day when it was -3. BEWARE OF REDLINE OIL! I will be installing dual 4links on my yota real soon once i put a new motor in her I could only find one soda can, so i had to use my Old Spice can XD

02-09-2009, 03:21 PM	#10
smashmetal Rock Stacker Join Date: Feb 2009 Location: Oregonian liven in Utah Posts: 51	some poser shots............ New frame and some rubber Last edited by smashmetal; 02-22-2009 at 04:27 PM.

02-10-2009, 06:52 PM	#11
username Quarry Creeper Join Date: Dec 2008 Location: Post Falls, ID Posts: 338	early remote lockout setup, subject to change at anytime. King of the Kitchen! thats all for now!

02-10-2009, 10:13 PM	#12
klip Newbie Join Date: Jan 2009 Location: Paradise Posts: 20	http://i604.photobucket.com/albums/t...creeper015.jpg http://i604.photobucket.com/albums/t...creeper016.jpg http://i604.photobucket.com/albums/t...creeper017.jpg

02-14-2009, 03:40 PM	#13
bondo303 Newbie Join Date: Feb 2009 Location: Deer Park,NY Posts: 18	Here is mine. No electronics yet, just a roller.

02-15-2009, 02:06 PM	#14
catcrawler Newbie Join Date: Feb 2009 Location: Indian Rocks Posts: 13

02-15-2009, 02:09 PM	#15
catcrawler Newbie Join Date: Feb 2009 Location: Indian Rocks Posts: 13

02-20-2009, 06:40 PM	#16
m&mkrawler Quarry Creeper Join Date: May 2008 Location: stockton Posts: 337	__________________ [CENTER][COLOR=DarkOrange] [COLOR=SandyBrown][COLOR=Pink][COLOR=Yellow][B]T[/B]eam [B]L[/B][/COLOR]ow [COLOR=Yellow][B]E[/B][/COLOR]levation [COLOR=Yellow][B]R[/B][/COLOR]ock [COLOR=Yellow][B]K[/B][/COLOR]rawlers[/COLOR][/COLOR] [FONT=System][COLOR=Yellow]'Team L E R K'[/COLOR][/FONT] [FONT=Microsoft Sans Serif][COLOR=LemonChiffon]Black Widow HustleR [/COLOR][/FONT][/COLOR] [/CENTER]

02-20-2009, 10:54 PM	#17
psychosammi Newbie Join Date: Dec 2008 Location: Mesa Arizona Posts: 14

Sponsored Links

02-23-2009, 09:10 AM	#18
rockintheriver Rock Stacker Join Date: Oct 2008 Location: Sacramento Posts: 83	Finally got a good pic of my Creeper. Thanks to Racer-x for taking and posting the picture Basic setup Integy 55t lathe motor, Mamba Micro Pro, and of course HB Rovers.

02-23-2009, 07:27 PM	#19
yjjoyride Newbie Join Date: Jan 2009 Location: Long Beach Posts: 19	new to crawling and already hooked!

02-24-2009, 12:14 AM	#20
Madpete98 Rock Stacker Join Date: Aug 2008 Location: Solihull UK Posts: 69	Why Crawl When You Can Creep? First day out.........broke nothing and had a blast! Swapped to HB 'Rovers' and it floats up things, i've flipped the shocks upside down to lower the C of G, they work perfect like this, no binding or reduction in effect of droop/sprung setup. bestones mp ;) __________________ Theres a fine line between insanity and genius, and I just crossed over..................

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode