Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Traxxas Crawlers
Loading

Notices

Thread: Maxx Crawlers Gallery

Reply
 
LinkBack Thread Tools Display Modes
Old 03-09-2005, 03:49 AM   #1
Colt Python/SR9c
 
TwistedCreations's Avatar
 
Join Date: Feb 2004
Location: out in the shop, reloading ammo!
Posts: 8,626
Arrow Maxx Crawlers Gallery

This has been requested from other Members, so it's time to post up your rides and keep them all in one spot so others can view them and help give ideas.DO NOT post pictures of projects torn in pieces,they need to be driving and in one piece.Have at least one picture with the body on and not a bunch of chassis shots( unless it's a tuber).Pics that DO NOT work( due to the host), will also be deleted.If you see something in the pics and want more info, please PM that person and ask. This will keep all the BSing to a minimum.

If you guys can't re-size, you can send them to TwistedCreations@cinci.rr.com and i will try to help ya out

answer the following ( copy and paste if ya want)

Truck Base :

ESC:

Motor(s):

Servo(s):

Trans:

Axles:

Tires:

WB:

Overall Width:

Diff clearance:

Center Chassis clearance:

Overall height:

Overall weight:

Last edited by TwistedCreations; 09-05-2006 at 05:56 PM.
TwistedCreations is offline   Reply With Quote
Sponsored Links
Old 03-09-2005, 07:36 PM   #2
Rock Stacker
 
Join Date: Feb 2005
Location: portsmouth
Posts: 84
Default

Truck Base: E-MAXX
ESC: EVX with mod
Motor: Mag Mayhem
Servo(s): Hitec 5625(f) 5625(r)
Tranny: E-MAXX
Axles: Emaxx locked out (diffs locked)
Tires: Jumbo kongs
Wheelbase: 16
Overall Width: 18
Diff clearance: 4.5
Center Chassis Clearance: 4.5
Top of Chassis Height: 9
Top of Body height: 13
Attached Images
  

Last edited by onewyr; 04-22-2005 at 06:21 PM.
onewyr is offline   Reply With Quote
Old 03-12-2005, 04:51 PM   #3
Rock Crawler
 
Join Date: Jun 2004
Location: SW, Connecticut
Posts: 685
Default

My old Maxx

Truck Base : E Maxx

ESC: Futuba 230

Motor(s): Multiplex 600

Servo(s): Hobbico CS80

Trans: Narrowed single speed e maxx

Axles: Custom aluminum sheet axles with maxx internals

Tires: cut LST's

WB: 16.5

Overall Width: 15.5

Diff clearance: 4.25

Center Chassis clearance: 5

Overall height: 10

Overall weight: ~8
CustomCrawler is offline   Reply With Quote
Old 03-28-2005, 10:12 AM   #4
Quarry Creeper
 
Join Date: Feb 2005
Location: Indy-Westside
Posts: 306
Default

Truck Base : E-Maxx

ESC: Novak Rooster

Motor(s): Trinity Spec. (soon to be lathe motor)

Servo(s): Bluebird 630mg(front)/ Futaba S9201(rear)

Trans: E-Maxx locked in 1st

Axles: Maxx hybrid(used Twisted's idea!!)

Tires: Imex J Hawgs on Maxximizer beadlocks

WB: 15"

Overall Width: 14.5

Diff clearance: 2.5

Center Chassis clearance: 4.5

Overall height: 10.5

Overall weight:about 8lbs
Attached Images
  
silvr_tung_devl is offline   Reply With Quote
Old 03-29-2005, 06:25 AM   #5
Colt Python/SR9c
 
TwistedCreations's Avatar
 
Join Date: Feb 2004
Location: out in the shop, reloading ammo!
Posts: 8,626
Default

Truck Base : Maxx

ESC: Super Rooster

Motor(s): Johnson 27t w/ GD600

Servo(s): Cs-70's F&R

Trans: Maxx locked into 1st

Axles: Hybrid Maxx axles

Tires: LST's on narrowed stock maxx rims

WB: 17"

Overall Width: 16"

Diff clearance: 4.5"

Center Chassis clearance: 5.5"

Overall height: 12"

Overall weight: 10lbs.
Attached Images
  

Last edited by TwistedCreations; 04-28-2005 at 07:29 AM.
TwistedCreations is offline   Reply With Quote
Old 04-13-2005, 09:06 PM   #6
Colt Python/SR9c
 
TwistedCreations's Avatar
 
Join Date: Feb 2004
Location: out in the shop, reloading ammo!
Posts: 8,626
Default

Posted for Extremeoffroad

Truck Base : Maxx and gecko

ESC: EVX with both mods

Motor(s): mag mayhem

Servo(s): hitec HS-5735MG 1/4 scale

Trans: e maxx

Axles: t maxx locked out

Tires: jumbo swamp dawgs

WB: 18in.

Overall Width: 17

Diff clearance: 4

Center Chassis clearance: 4.5

Overall height: 12in

Overall weight: 10lbs.
Attached Images
   

Last edited by TwistedCreations; 04-13-2005 at 09:08 PM.
TwistedCreations is offline   Reply With Quote
Old 04-20-2005, 04:38 AM   #7
BDR
Quarry Creeper
 
Join Date: Jun 2004
Location: Melbourne Australia
Posts: 271
Default

Truck Base :E-MAXX

ESC:EVX one battery one motor

Motor(s):Mag mayem with reduction box

Servo(s):645

Trans:Stock locked in first

Axles:locked stokers

Tires:Front cut jumbo claws Rear cut jombo swamps

WB:16 and a bit inches

Overall Widthunno

Diff clearance:4 and bit inches

Center Chassis clearance:5 and a bit inches

Overall heightunno

Overall weight:About 2 kilo's





Chris

Last edited by BDR; 04-20-2005 at 04:41 AM.
BDR is offline   Reply With Quote
Old 05-01-2005, 09:24 PM   #8
I wanna be Dave
 
Join Date: Feb 2004
Location: Columbia Gorge
Posts: 5,512
Default

Might as well post up a few pictures of my rig... it's about finished...

Stats:
- Old Maxx(narrow)
- RCRockGear Maxx SAS Kit
- Rockraider Chassis
- E-Maxx tranny locked in first & zero slop modification
- Big 'ol spur gear and 8-tooth pinion
- 1/8 scale buggy shocks up front & X-Factor shocks in rear
- currently 15.5" wheelbase

It's almost too clean and pretty to run on the rocks...
Attached Images
  

Last edited by toyofast; 09-03-2005 at 07:46 PM.
toyofast is offline   Reply With Quote
Old 05-11-2005, 02:30 PM   #9
Colt Python/SR9c
 
TwistedCreations's Avatar
 
Join Date: Feb 2004
Location: out in the shop, reloading ammo!
Posts: 8,626
Default

Truck Base : 40's willys jeep based tube frame/alum

ESC:evx with mod

Motor(s):55t lathe 9-72

Servo(s):hi tech 645mg 133 gram

Trans:e maxx

Axles:e maxx locked out

Tires:k rocks mounted on maximizers

WB:

Overall Width:15 1/2

Diff clearance:4

Center Chassis clearance:5 1/2 (bottom trans mount)

Overall height:10 3/4

Overall weight no scale sorry s/a if not less than stock maxx
Attached Images
  
TwistedCreations is offline   Reply With Quote
Old 05-31-2005, 08:06 PM   #10
Colt Python/SR9c
 
TwistedCreations's Avatar
 
Join Date: Feb 2004
Location: out in the shop, reloading ammo!
Posts: 8,626
Default

The newest truck from Twisted Creations
Owner: Rufies97XJ


Truck Base : Emaxx

ESC: SR

Motor(s): Reversed MM motor with GD600

Servo(s):CS-70 in the front and Bluebird 630 in the rear

Trans: Maxx locked into 1st

Axles: Custom Maxx axles

Tires: LST's on narrowed Hot Bodies rims

WB: 16 1/2"

Overall Width: 15 1/2"

Diff clearance: 4 1/2"

Center Chassis clearance: 5 3/4"

Overall height: 11"

Overall weight: 8 lbs.
Attached Images
    
TwistedCreations is offline   Reply With Quote
Old 06-05-2005, 10:29 AM   #11
Rock Stacker
 
Join Date: Apr 2004
Location: Bamberg / Germany
Posts: 93
Default

Project Flexx-Maxx 4x4x4

Truck Base : New E-Maxx

ESC: Jamara NoLimit

Motor(s): Multiplex Permax 600

Servo(s): HiTech 645MG front +rear

Trans: E-Maxx tranny @76/12 + Graupner reduction gearbox 2,8:1

Axles: E-Maxx, both locked with spool

Tires: Imex Jumbo Kongs on Sayville rims; cutted

WB: 42,3cm

Overall Length: 60,5cm

Overall Width: 47,0cm

Diff clearance: 11,7cm

Center Chassis clearance: 14,5cm

Overall height: 30,0cm

Overall weight: 6688g - inclusive batteries and some dirt





More pictures in hi-res: pic 1 | pic 2 | pic 3 | pic 4 | pic 5

Manuel

Last edited by Uncle_Manuel; 06-06-2005 at 05:10 AM.
Uncle_Manuel is offline   Reply With Quote
Old 06-12-2005, 12:34 PM   #12
Pebble Pounder
 
Join Date: Jun 2004
Location: Tulsa
Posts: 137
Default Here's Crawlmaxx

E-Maxx
EVX w/mod
1-55t Lathe
JR Racing Z650M
E-Maxx tranny
Hyrbid Maxx with CVD's
Cut & Shut Kongs with grooving, 3" wide, stock Maxx wheels backwards
17" WB
17" width
4 1/8" dif clearance
4 3/4" chassis clearance
12 1/2" overall height
~11 lbs



crawlmaxx is offline   Reply With Quote
Old 07-10-2005, 02:56 AM   #13
Pebble Pounder
 
Join Date: Apr 2004
Location: Sydney, Australia
Posts: 179
Default

The Rockroach

Truck Base : Maxx (early series ~2000 Narrow Track)

ESC: Novak SR

Motor(s): 2 x Mag Mayhems (one reverse timing, one forward)

Servo(s): Hitec HS 5645-MG

Trans: Maxx locked in first

Axles: Locked out maxx narrow track

Tires: Maxx Mulchers

WB: 16"

Overall Width: 14.5"

Diff clearance: 3"

Center Chassis clearance: 4"

Overall height: 9.75"

Overall weight: dunno. Heavier than I would like.

Final Crawl Ratio: 8T/72T = 71:1 crawler ratio
Attached Images
    

Last edited by TwistedCreations; 07-14-2005 at 03:08 PM. Reason: adding pics
MudCow is offline   Reply With Quote
Old 07-15-2005, 08:14 PM   #14
Pebble Pounder
 
Join Date: Jun 2005
Location: fort bragg, ca (NOR-CAL)
Posts: 192
Default

Truck Base : E-maxx

ESC: EVX (with mod)

Motor(s): lathe motor (1)

Servo(s): 645mg front

Trans: e-maxx locked in 1st

Axles: locked out maxx axels and arms

Tires: savage tires

WB: 15"

Overall Width: 16"

Diff clearance: 3.75"

Center Chassis clearance: 4.75"

Overall height: around 11"

Overall weight: 8.5lbs









more to come.

colin

Last edited by Maxx4life; 08-01-2005 at 12:53 PM.
Maxx4life is offline   Reply With Quote
Old 07-19-2005, 12:44 PM   #15
Newbie
 
Join Date: Mar 2005
Location: Porterville
Posts: 1
Default

Man my e-maxx is nothing like yours.
BIGMaxx is offline   Reply With Quote
Old 07-26-2005, 10:48 PM   #16
Pebble Pounder
 
Join Date: Apr 2004
Location: Calgary Canada
Posts: 138
Default

Truck Base :Maxx

ESC:Rooster

Motor(s):Johnston 27T

Servo(s):To be CS-80's f/r

Trans:Homemade from bbq roster

Axles:Maxx

Tires:Stock

WB:18''

Overall Width:Stock

Diff clearance:3"

Center Chassis clearance:5''

Overall height:dunno

Overall weight:Freakin' Heavy




wheeler is offline   Reply With Quote
Old 07-31-2005, 09:50 PM   #17
Quarry Creeper
 
Join Date: Feb 2005
Location: Grand Forks
Posts: 221
Default

Truck Base : Emaxx

ESC: Tekin Rebel 2

Motor(s): Integy 55T Lathe Motor

Servo(s): 645-MG Servo

Trans: E-Maxx Locked in 1st

Axles: Solid Axles

Tires: LST's on RPM Clawz

WB: 16 inches

Overall Width: 17 inches

Diff clearance: 3 1/2 inches

Center Chassis clearance: 4 3/4 inches

Overall height: 6 inches

Overall weight: 8.5 pounds



Last edited by TwistedCreations; 05-04-2006 at 01:13 PM.
Eclipse is offline   Reply With Quote
Old 08-08-2005, 09:20 AM   #18
Quarry Creeper
 
Join Date: May 2005
Location: Bakersfield
Posts: 242
Default

Truck Base : E-Maxx

ESC:Super Rooster

Motor(s):1 Magnetic Mayhem attached to t a GD-600

Servo(s):Hitec HS 645's front and rear

Trans:Stock E-maxx locked into first

Axles:Custom tube axles with E-Maxx diffs and knuckles

Tires:Lst's on narrowed Maximizer Beadlocks

WB:17"

Overall Width:16 3/4"

Diff clearance:3 1/2"

Center Chassis clearance:5"

Overall height:11"

Overall weight:11lbs 7 oz






Last edited by Esteban86K5; 08-08-2005 at 09:22 AM.
Esteban86K5 is offline   Reply With Quote
Old 08-25-2005, 04:40 AM   #19
Colt Python/SR9c
 
TwistedCreations's Avatar
 
Join Date: Feb 2004
Location: out in the shop, reloading ammo!
Posts: 8,626
Default

Posted for Bipolarcrawler

Truck Base :traxxas E maxx,custom tube xo skeleton

ESC:traxxas

Motor(s):trinity 27,integ 55 lathe

Servo(s):645 hi tech fr/rear

Trans:maxx

Axles:custom alum,maxx diffs,steel cv's

Tires:modified k rock(mods a must)

WB:17"c-c

Overall Width:16"

Diff clearance:4"

Center Chassis clearance:4-1/4

Overall height:10"
Attached Images
 
TwistedCreations is offline   Reply With Quote
Old 09-14-2005, 08:14 PM   #20
RCC Addict
 
Join Date: Nov 2004
Location: Redding, CA
Posts: 1,288
Default Pud

PYRO's MAXX/ txt contraption


Truck Base : highly modded TXT frame

ESC: SR

Motor(s): peramax 600

Servo(s): hightec 5945

Trans: modded TXT, gd- 600- 89:1 gear ratio

Axles: maxx

Tires: moabs

WB: 17"

Overall Width: 16"

Diff clearance: 3" f/r

Center Chassis clearance: 4"

Overall height: 9 3/8" w/ body

Overall weight: heavy



Attached Images
    

Last edited by mike; 04-21-2007 at 04:45 PM.
mike is offline   Reply With Quote
Reply



LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/traxxas-crawlers/8540-maxx-crawlers-gallery.html
Posted By For Type Date
t-maxx off roader/rock crawler This thread Refback 10-05-2011 01:01 PM

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 10:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com