01-23-2022, 07:27 AM | #1 |
RCC Addict Join Date: Jan 2010 Location: Barboursville, WV
Posts: 1,448
| LC70 jerp
This is gonna take a while. I mostly assembled the roller last spring and after several failed attempts at printing a body, I’ve started back up again. We’ll see where this goes. |
Sponsored Links | |
01-24-2022, 08:08 AM | #2 |
RCC Addict Join Date: Jan 2010 Location: Barboursville, WV
Posts: 1,448
| Re: LC70 trail king
I’m proud of this. I cut a section out of the print file and then 3d printed a “pre-bobbed” bed. It needs some cleanup, but I think it came out good. Now to figure out how to get the ride height down. |
01-24-2022, 03:22 PM | #3 |
RCC Addict Join Date: Jan 2010 Location: Barboursville, WV
Posts: 1,448
| Re: LC70 trail king
lol |
01-24-2022, 06:21 PM | #4 |
I wanna be Dave Join Date: Oct 2010 Location: Caldwell ID.
Posts: 4,328
| Re: LC70 jerp
Looks great Brian. Looks to me like you could trim down the cab sides quite a bit to get the body lines to line up with the bed, and you would be close to where you need to be... I ran my Yota hard body really low like this, cut the fenders open and she sat pretty.... And yes, the air cleaner stuck out the hood... |
01-25-2022, 09:39 AM | #5 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: LC70 jerp
Great job so far! Following along to watch the progress! Curious to see how the 3D printed body turns out! |
01-25-2022, 10:35 AM | #6 | |
RCC Addict Join Date: Jan 2010 Location: Barboursville, WV
Posts: 1,448
| Re: LC70 jerp Quote:
You and me both! | |
01-25-2022, 08:32 PM | #7 |
RCC Addict Join Date: Jan 2010 Location: Barboursville, WV
Posts: 1,448
| Re: LC70 jerp
well…I’ve got a set of 1.7 RC4WD Goodyear MTs, HH crawlmaster 10t, hobbywing 1080, and a set of method knock offs all on the way. I printed HumboldtEF's boat sides today and a cantilever setup but I need the wheels/tires so I can see what it will look like. Last edited by brianw; 01-26-2022 at 06:39 AM. |
01-29-2022, 05:49 PM | #8 |
RCC Addict Join Date: Jan 2010 Location: Barboursville, WV
Posts: 1,448
| Re: LC70 jerp
might be cool. adapted from a jeep gladiator file. |
01-30-2022, 07:18 AM | #9 |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| Re: LC70 jerp
Cool project, and nice choice of wheels Sent from my iPhone using Tapatalk |
01-31-2022, 08:50 PM | #10 |
RCC Addict Join Date: Jan 2010 Location: Barboursville, WV
Posts: 1,448
| Re: LC70 jerp |
02-02-2022, 06:28 PM | #11 |
RCC Addict Join Date: Jan 2010 Location: Barboursville, WV
Posts: 1,448
| LC70 jerp
The bed is mounted. I installed 70mm rc4wd Bilstein shocks and laid them forward…they’re very soft. Cab needs to come way down. Last edited by brianw; 02-02-2022 at 06:46 PM. |
LC70 jerp - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bananaclip’s King of the Trail LC70 | Bananaclip | SSD Trail King - Pro Scale Chassis Builder Kit | 48 | 02-12-2022 09:16 PM |
HumboldtEF's LC70 SSD Trail King | HumboldtEF | SSD Trail King - Pro Scale Chassis Builder Kit | 200 | 01-24-2022 09:04 PM |
Help how to mount a Lc70 to the SSD trail king plz | Chuckb86 | SSD Trail King - Pro Scale Chassis Builder Kit | 2 | 09-18-2021 05:37 AM |
BRX01 Toyota LC70 and SCX10 ii Range Rover hit the trail | JoeConti | Videos! | 0 | 01-04-2020 02:47 PM |
| |