RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Superclass Crawlers (http://www.rccrawler.com/forum/superclass-crawlers/)
-   -   Ivory (http://www.rccrawler.com/forum/superclass-crawlers/222126-ivory.html)

JeremyH 02-10-2011 08:48 AM

The wheels are 115mm (~4.5") in OD and I narrowed them to 1.5" in width.

The tires measure just over 8" in OD when mounted on the wheels.

"thumbsup"

racer_zh 02-13-2011 04:12 AM

Thanks alot for your Quick answer.

one other question what is your Vehicle track width with the HPI blasts and the Supersedonas?

JeremyH 02-18-2011 06:21 PM

Quote:

Originally Posted by racer_zh (Post 2924373)
one other question what is your Vehicle track width with the HPI blasts and the Supersedonas?

Racer, sorry that it took me a while to get back to you on this....I've been busy lately and this truck has been packed away. The track width with the wheels and tires mounted is 14.25".

I also ordered up some bling parts:
(red shock parts to replace the blue)
http://i171.photobucket.com/albums/u...y/P1040595.jpg

(Ti kingpins)
http://i171.photobucket.com/albums/u...y/P1040599.jpg

JeremyH 02-20-2011 11:21 AM

I finally got the battery off of the upper links and mounted to the gearcase. I was planning on just drilling the gearboxes like I did on my Berg, but then BigRon came out with a new carbon fiber mount for the bergs, so I figured I'd see if it fit my Super Bully...and it does!

http://i171.photobucket.com/albums/u...y/P1040619.jpg
http://i171.photobucket.com/albums/u...y/P1040620.jpg
http://i171.photobucket.com/albums/u...y/P1040621.jpg

I also took first in our local comp yesterday....here is an action shot:

http://i171.photobucket.com/albums/u...1/P1040617.jpg

The Violator 02-20-2011 11:36 AM

I like that battery mount. I think I pick one up for my bully super when she gets her next rebuild. Should be REAL SOON. (key evil laugh while I cough up carbon fiber dust)

JeremyH 02-20-2011 11:41 AM

Quote:

Originally Posted by The Violator (Post 2939848)
(key evil laugh while I cough up carbon fiber dust)

:lmao:

Diamond D 02-20-2011 02:49 PM

Looks great. I've been thinkin bout doin the same.

Illeagle 02-20-2011 07:45 PM

Battery mount looks sweet in there, what battery you running on it?

Congrats on the win too!

JeremyH 02-20-2011 08:00 PM

Thanks guys!

The batteries that I run on this truck are Krawler Hobbies (Krawl Off Road) 850mAh 4S packs:
http://www.krawloff-road.com/store/i...&product_id=53
"thumbsup"

scottkerley 02-21-2011 11:21 AM

Jeremy,is that battery mount a bolt-on ? & does BigRon have them for sale ?

JeremyH 02-21-2011 11:32 AM

Yep, to both questions.
http://www.rccrawler.com/forum/chassis-suspension/299219-berg-behind-axle-battery-mount.html
(you want the one for the bergs)

scottkerley 02-21-2011 02:29 PM

I taket it that a standard 1300 pack will fit ?

JeremyH 02-21-2011 02:32 PM

Hummm...not sure. I can measure the plate this evening for you if that will help.

scottkerley 02-21-2011 02:41 PM

If you could that would be great,right after I hit "submit" I remembered you run 850's,still would like to know since that is a killer location for them.Thanks Jeremy.

JeremyH 02-21-2011 04:06 PM

Scott, the plate is 35x60mm. "thumbsup"

scottkerley 02-21-2011 05:05 PM

Sounds like it will work,I think I'll order one up and see..............Thanks!

scottkerley 02-22-2011 02:42 PM

Jeremy,does the RCC stands keep the tires off the ground with your 8" tires ? btw congrats on the comp this last w/e.

JeremyH 02-22-2011 04:01 PM

Acutally....those stands allow the tires to barely touch the ground. And thanks! "thumbsup"

scottkerley 02-23-2011 11:06 AM

Ok,here we go again,where can I find teflon like what you used to wrap to axles ? I would like to keep the carnage to a minimum as spendy as these axles are !

JeremyH 02-23-2011 11:35 AM

IIRC, I got that stuff from McMaster.com "thumbsup"


All times are GMT -6. The time now is 10:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com