RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Superclass Crawlers (http://www.rccrawler.com/forum/superclass-crawlers/)
-   -   Superjuice Berg (http://www.rccrawler.com/forum/superclass-crawlers/296281-superjuice-berg.html)

4xFord 01-29-2011 11:36 PM

Superjuice Berg
 
I finally built up my super berg again, on a prototype V3 Superjuice. So far I really like it, but I still have a lot of tuning to do. And I need redo the rear upper and lower links.

http://i17.photobucket.com/albums/b5...SJsideshot.jpg

I built a set of Super sized 7.75" HB Khaos tires for it. They are on Crawler Innovations machine narrowed HPI Blast wheels with Crawler innovations 7.75" dual stage foams.

http://i17.photobucket.com/albums/b5...uperKhaos2.jpg

Running single 7980 servos.

http://i17.photobucket.com/albums/b5...JFronthalf.jpg

I cut some just over 9oz front knuckle weights, not the prettiest, but they work fine. Both front and rear axles are running the RCBros zero ackerman 12mm bearing knuckles and Super 300 CVD's.

http://i17.photobucket.com/albums/b5...Jfrontaxle.jpg

Rear axle is similar to the front and has Sven's knuckle weight system. Two slugs on each rear for now.

http://i17.photobucket.com/albums/b5...SJbackhalf.jpg

Here is all the electronics on the skid. 2 fxr's, two bec's, and a Futaba 614 reciever.

http://i17.photobucket.com/albums/b5...lectronics.jpg

Diamond D 01-29-2011 11:51 PM

Very nice."thumbsup" Did you ditch the super bully's? Really liking that chassis. I keep wondering when its going to be available to buy.

Gear Jammer 01-30-2011 02:25 AM

I'm liking those Super Pins"thumbsup"... how wide did they turn out to be and did you glue them to the rim any or are they just stretch fitted?

TURBOFEST 01-30-2011 08:07 AM

Looks sick Shelby!! That new bj chassis has some smooth lines

4xFord 01-30-2011 09:10 AM

Quote:

Originally Posted by Diamond D (Post 2894408)
Very nice."thumbsup" Did you ditch the super bully's? Really liking that chassis. I keep wondering when its going to be available to buy.

Thanks I still have most of the superbully left. Usually its the reiable running super when I'm working on this one. I know Krawlfreak likes to put some time on the proto's before settling on a final production run. He does operate fast though....

Quote:

Originally Posted by Gear Jammer (Post 2894500)
I'm liking those Super Pins"thumbsup"... how wide did they turn out to be and did you glue them to the rim any or are they just stretch fitted?

Thanks they seem to work really well so far. They are spot glued in 4 places on each bead.

Quote:

Originally Posted by TURBOFEST (Post 2894707)
Looks sick Shelby!! That new bj chassis has some smooth lines

Thanks Jim I really like it a lot. "thumbsup"

JeremyH 01-30-2011 11:04 AM

Nice work Shelby! Just dont drill out the gears... :lol:

RcBro 01-30-2011 11:15 AM

Looking good Shelby!

Mudsy 01-30-2011 12:03 PM

Awesome work. Can't wait for the superjuice chassis to be avaiable. My BJ3 miniclod needs a big bother.

jaybird1ton 01-30-2011 06:23 PM

Sweet truck and nice work!"thumbsup"

Almighty Malach 01-30-2011 08:18 PM

I got to fondle this thing last weekend in Arizona, everything about it looks nice and clean"thumbsup" Hope to see it on the rocks sometime soon, maybe ECC or Rocas Rojo this summer8)

4xFord 01-31-2011 11:07 PM

Quote:

Originally Posted by JeremyH (Post 2894942)
Nice work Shelby! Just dont drill out the gears... :lol:

Haha ya I'm so hard headed that I will most likely drill that gear again. This time I just won't get so close to the pin! :roll:

Quote:

Originally Posted by RcBro (Post 2894964)
Looking good Shelby!

Thanks Will, these knuckles are sweet! Can't beat Zero Ackerman! The bigger bearings are great insurance, especially in a super. Also the shorter knuckle arm really keeps the tire rod out of harms way. Running a OTA tie rod wouldn't gain any more clearance. "thumbsup"

Quote:

Originally Posted by Mudsy (Post 2895054)
Awesome work. Can't wait for the superjuice chassis to be avaiable. My BJ3 miniclod needs a big bother.

You won't be dissapointed! Krawlfreak drove his to second place at Copperstate Crawloff in a tough crowd. 8)

Quote:

Originally Posted by jaybird1ton (Post 2895771)
Sweet truck and nice work!"thumbsup"

Thanks!

Quote:

Originally Posted by Almighty Malach (Post 2896054)
I got to fondle this thing last weekend in Arizona, everything about it looks nice and clean"thumbsup" Hope to see it on the rocks sometime soon, maybe ECC or Rocas Rojo this summer8)

Thanks! I'm hoping to make it to both of those comps. I will actually have drivin the rig before those. :oops: May not have been my brightest idea to switch to a new super with zero drive time right before a big comp, but I just couldn't resist it!

4xFord 01-31-2011 11:19 PM

Also just wanted to add that I am durability testing the 7075 RcBros lockers in this super, since there's no way my 2.2 would faze them. So far they have held up and the super courses at copperstate were not easy on the rigs!

Also found some pics of my rig on that crazy high grip rock.

http://i1138.photobucket.com/albums/...1/DSC_5665.jpg

http://i1138.photobucket.com/albums/...1/DSC_5824.jpg

http://i1138.photobucket.com/albums/...1/DSC_5826.jpg

JeremyH 02-01-2011 07:17 AM

Quote:

Originally Posted by 4xFord (Post 2898835)
Haha ya I'm so hard headed that I will most likely drill that gear again. This time I just won't get so close to the pin!

I figured you would....:ror:

helhedded 02-01-2011 07:22 AM

:shock:


This thing is mean! I love it.

Szczerba 02-01-2011 07:30 AM

1 Attachment(s)
That super is killer. I wish I had an extra $1,000 so you could build me one.

Those big sexy tires remind me of this beast. "thumbsup"

Nova's Ark 02-01-2011 10:47 AM

From the first picture you text messaged me I was in love. It has so a sleek look and smooth lines. It looks bad azz fo sho"thumbsup" Very, very nice Super Shelby. I'm also glad you are lovin' the tires and foams.8)

TURBOFEST 02-01-2011 11:19 AM

I would not want to have been the person who had to trim the tread on those bad boys! Holy tedious batman!!! :shock:

Who did that...You or Eddie?

4xFord 02-01-2011 12:28 PM

Quote:

Originally Posted by TURBOFEST (Post 2899507)
I would not want to have been the person who had to trim the tread on those bad boys! Holy tedious batman!!! :shock:

Who did that...You or Eddie?

Dude it took forever, 450 lugs per tire, 1800 total. :shock:

Almighty Malach 02-01-2011 12:41 PM

Quote:

Originally Posted by 4xFord (Post 2898852)
Thanks! I'm hoping to make it to both of those comps. I will actually have drivin the rig before those. :oops: May not have been my brightest idea to switch to a new super with zero drive time right before a big comp, but I just couldn't resist it!

I did the same thing too, finished my super up in the car on the way to the comp spot:ror:

Quote:

Originally Posted by 4xFord (Post 2898852)
Also just wanted to add that I am durability testing the 7075 RcBros lockers in this super, since there's no way my 2.2 would faze them. So far they have held up and the super courses at copperstate were not easy on the rigs!

I'm glad somebody liked those courses, me and Hoppa worked hard on them:twisted:

TURBOFEST 02-01-2011 12:46 PM

Quote:

Originally Posted by 4xFord (Post 2899609)
Dude it took forever, 450 lugs per tire, 1800 total. :shock:

YIKES :shock:"thumbsup"


All times are GMT -6. The time now is 03:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com