Krawl's "THE NEXT LEVEL" SUPER AGENT #1

[Farmer]

Originally Posted by krawlfreak

notice how little squish the 2.2 tires have




thats with 9 oz of weight on the front

That's just frickin insane Excellent work my friend

Later,
Farmer

[TedBull]

Nice work Jeremy. Thats no easy feat.

[krawlfreak]

Originally Posted by XJ Farmer

That's just frickin insane Excellent work my friend

Later,
Farmer

Originally Posted by TEDBULL

Nice work Jeremy. Thats no easy feat.

thanks

more to come tonight hopefully.

[calcagno45]

Thanks for the pics and this epic build for us all to drool over!!

Any chance you measure it's turning radius? It's got to be close to nothing...

[TedBull]

How is it coming along Jeremy?

[krawlfreak]

Originally Posted by TEDBULL

How is it coming along Jeremy?

I am getting the last few pieces to complete the rig tomorrow at pcc.

It is adjustable (with knuckle weights) from @4.8 pounds to 5.8 lbs with fully cased fxr's two bec's a 614ff and an 800 mah pack.....so there's room for more

I will see where I fall after running a little. I would say I hit my Target weight and then some.

I will say the other truck is fully functioning and I have been hearing all night about how unbelievable it is...

Maybe he will chime in on the trip down to Monterey.

[yukon635]

Got to see the two new, under 6lb supers at PCC and I must say. I am speechless. The 2.2 Ti-fi axles only scratched the surface. These new axles/HD shafts along with the CF parts (chassis/wheels and more) are incredible. I only got to see Jeremy run part of a course and it looked wicked. They don't crab walk with 4-wheel steer, they side step

to the design and work put in by both Krawlfreak and SDS

[Diamond D]

Awesome crawling with you this past weekend. Thanks for all the help spotting and tips here and there. Your rig is looking awesome. Looking forward to the next comp.

[dude26]

no pics on the rocks ??? or a vid ???

[olblueyez]

You may wanna clean the lens on your camera too.

Sent from my BlackBerry 9900 using Tapatalk

[yukon635]

So when do we get to see the video from PCC?

[krawlfreak]

Originally Posted by yukon635

So when do we get to see the video from PCC?

unfortunately the six courses of video i thought i had were all corrupted when i returned

i am going to work on some more next week hopefully when i get some tuning done.

she is impressive to say the least.

[krawlfreak]

so i finally got some time to play with this thing....

this is interesting...



here is the ACTUAL rtr weight of everything. right on target


i still have some work to do on the electronics so i estimate a bit more loss.

so far this thing is as impressive as my old truck but there are climbs and manuevers that this truck will perform that will blow even a 7 lb truck away!

[Hittman]

Man, I wish you had some steering on that...

[ittybitty]

That's just absolutely beautiful! Good work on the entire project Jeremy! I'd love to see your knuckle weight holders come available in some form

[rcjunky3]

those boss claws you are running do you have any good sidewall shots of the tire and how tall are they. that rig is looking bad ass thats for sure

[krawlfreak]

Originally Posted by Hittman

Man, I wish you had some steering on that...

I know huh...

Originally Posted by ittybitty

That's just absolutely beautiful! Good work on the entire project Jeremy! I'd love to see your knuckle weight holders come available in some form

Thanks Ryan. My steering and weight system is all integrated and specific to my servo position. It is posible to change slightly....these are the second version since pcc. I.have slowed down the steering significantly and it feel quite a bit more powerfull too. There might be something available down the road after I get all the specifics figure out to work on different setups.

Originally Posted by rcjunky3

those boss claws you are running do you have any good sidewall shots of the tire and how tall are they. that rig is looking bad ass thats for sure

They are 7.25 with the weight of the truck on them. I am still feeling the 7.25" - 7.5" tires are the still the best performing size for the wheelbase we are allowed.

[Highlucks]

I've just read this whole thread for the first time. This is some inspired work, well done Jeremy

[krawlfreak]

Originally Posted by highlucks

I've just read this whole thread for the first time. This is some inspired work, well done Jeremy

thank you, that is much appreciated

[TedBull]

It looks realy good jeremy. Those Ti fighter axles almost disapear underneath that tie rod. We need some better pics of that thing on the rocks.