Racer`s Y-Town Lightweight-SuperXr

[racer_zh]

Originally Posted by TEDBULL

Those chassis doublers are very nice. Did you make them?

Yes i make them, i cut them from my old Superjucie Chassie. this are really expensive doublers

Do some work on my Weights Today :

They can take 11oz of weights on each side. will try to start with 5-7oz per side

[winkscrawler]

Looking good Manu. You are just ahead of me on the super builds. I am hoping not to use more than 4 to 5 ounces per knuckle weight with the lighter truck but time will tell.

[racer_zh]

Originally Posted by winkscrawler

Looking good Manu. You are just ahead of me on the super builds. I am hoping not to use more than 4 to 5 ounces per knuckle weight with the lighter truck but time will tell.

I hope the same but weighted with 5 oz i`m at 6.5 Lb RTR with my blast so i hope i can loose some more weight.

[ittybitty]

Is all of that weight hanging off of a Tomy knuckle weight mount?

[racer_zh]

Originally Posted by ittybitty

Is all of that weight hanging off of a Tomy knuckle weight mount?

Yes, i will test it.

If its not strong enough i will go to a Wraith style mount.

[Hittman]

Thats awsome! Great innovation man!!

[racer_zh]

Today i finish my suspensions.

big thanks to Dave ( Diamond D) for his Inputs. now it should look similar to his Rig.

Here some Pictures:

Ride high : ( 4" under skid)



Suspension Travel :



Max Steering on all corners:



Now all my parts are on the way.
in a Few days she will have her first Rollout.

And for sure i will bring a Movie back home.

[TedBull]

She is looking good. My super will be very simaler with the exception of the axle shafts. I like how you mounted the blast wheels, to narrow up the track width correct? How much castor are you running in the front?

[Diamond D]

[QUOTE=racer_zh;3828178]Today i finish my suspensions.

big thanks to Dave ( Diamond D) for his Inputs. now it should look similar to his Rig.

No prob. Its looking real nice. Do you have more pics of the front end? I wanna see how the shocks came together.

[Hittman]

Man! You better try and get some more steering! I dont think thats enough

[racer_zh]

Originally Posted by TEDBULL

She is looking good. My super will be very simaler with the exception of the axle shafts. I like how you mounted the blast wheels, to narrow up the track width correct? How much castor are you running in the front?

Correct thit is for a narrower Track Wide, but notice my axles are a lot wider than a normal Berg. tubes are about 0.45" wider per side.

Here anoter Caster Pic will have some more infos when i get back home.



[QUOTE=Diamond D;3828535]

Originally Posted by racer_zh

Today i finish my suspensions.

big thanks to Dave ( Diamond D) for his Inputs. now it should look similar to his Rig.

No prob. Its looking real nice. Do you have more pics of the front end? I wanna see how the shocks came together.

Thanks, the only issues i got, is the Upper links crash into my Chassie before the Shocks are compressed completely so i have to limit them alittel bit more in the front.

Will have some pics latter

Originally Posted by Hittman

Man! You better try and get some more steering! I dont think thats enough

I think its ok it looks like i get around 45° steering

[racer_zh]

Cause i have no Shafts and the French Nats are in 7 Days i have to go another way. here my solution:



All i can tell, the Links are working fine and the locations for my shocks looks even better

[eXtremeCostumez]

Nice
If you have some Super Berg´s for sale ,let me know Manu..

See you,
Felix

[racer_zh]

It getting closer to French Nats.

And today i get some Rims



Weight is around 1.4 oz and with tire 7.5oz

Will have some pics later

[TedBull]

I need as set of those wheels. Very nice.

[JeremyH]

Originally Posted by racer_zh

Cause i have no Shafts

I thought you were using the Wraith shafts with the delrin tubes?

[racer_zh]

Originally Posted by JeremyH

I thought you were using the Wraith shafts with the delrin tubes?

No every thing was prepared for super 300 hds. On the berg axles.

[JeremyH]

Ahh, gotcha.

[krawlfreak]

Originally Posted by racer_zh

It getting closer to French Nats.

And today i get some Rims



Weight is around 1.4 oz and with tire 7.5oz

Will have some pics later

that was incredibly fast

[racer_zh]

Originally Posted by krawlfreak

that was incredibly fast

Thanks Jeremy this was really fast .

Looks like i will hit 6.5 LB with 5oz Thungsten per Knuckle
With all the heavy stuff on the Axles and a lot of Alu parts , standard HHK motors and 2 BRXLs .

There is room for much more savings