Rowdys Super Meat Sword

[ROWDY RACING]

Originally Posted by Diamond D

These are the wideners I run up front. Not sure which setup is better. You have to drill these out a little. And you also have to get a 6mm barrel nut from gmade I believe. https://www.****crawlers.com/gmade-2...0442d945e86ab6
I also run the rear with the face on the inside and if I remember right I think I run a 335 hub and I'm sitting at 13.5" width front and back.

Links busted.

I may see if I can get Krawl to make me some 3 pc wheels and get the extra offset that way.

[ittybitty]

Gotta type in the C K R C in the link

[ROWDY RACING]

Originally Posted by ittybitty

Gotta type in the C K R C in the link

Ah, no thanks.

[Erik D_lux]

Originally Posted by The Violator

Nats is the best place. You would be at worst 5th or 6th. If they have that many show up.

There are already 9 paid

Another mod I really like for the Berg supers is the HR 2nd gear. Its a lower ratio and uses standard 48p pinions. Looks like they are in stock in a couple of places now too.

[ROWDY RACING]

Originally Posted by Erik D_lux

Another mod I really like for the Berg supers is the HR 2nd gear. Its a lower ratio and uses standard 48p pinions. Looks like they are in stock in a couple of places now too.

That's good to know thanks!
Got a part # for that?


I know interest in supers in lacking, but before I can bitch I must do my part to raise the numbers.

[Erik D_lux]

Rscp12sg

[ROWDY RACING]

Originally Posted by Erik D_lux

Rscp12sg

Thanks, the axles I bought are supposed to have sds super 300 gears, do those HRs hold up well?

[JeremyH]

Originally Posted by ROWDY RACING

Thanks, the axles I bought are supposed to have sds super 300 gears, do those HRs hold up well?

Those are only the little gears.......you'll use the HR gears to replace the only the big gears.

[Erik D_lux]

It gets a bit complicated on what gears to run and how to do it. If you need help on it, just say the word or, educate yourself and start reading here:

DLUX super build

[sally1800]

Originally Posted by JeremyH

Those are only the little gears.......you'll use the HR gears to replace the only the big gears.

Or use RCBro new gears.

Originally Posted by RcBro

I do not have the prices nailed down yet. Just got home from work and gotta go back tomorrow. OT is suppose to be over tomorrow which will give me more free time.

However I did get the first batch today from the machinist, and ill have them off to electropolishing Monday, which should put them back in my hands late next week a couple of fitment test, then we are ready!

To those waiting for the best product thus far, I appreciate it. Good things come to those who wait. 8 grams is a joke, how about more then half your rotating mass eliminated, polished for the smoothest running gear set you can buy, and hardened 4340 leaving strength at its highest!

Sorry for the lame ipad pictures.





Stock gear set (on my scale)


RcBros gear set (one my scale)

[ittybitty]

Originally Posted by sally1800

Or use RCBro new gears.

That doesn't provide the gear reduction of the larger HR 2nd gear

[JeremyH]

Originally Posted by sally1800

Or use RCBro new gears.

We're talking about a super here....not a 2.2.

[ROWDY RACING]

Berg axles showed up today! Like I said before I have never owned or wrenched on bergs, I must say people are not joking about the ease of working on these things.

[TEDROCKZ]

Originally Posted by ROWDY RACING

I must say people are not joking about the ease of working on these things.

Very convenient in whilst in a hurry. One tire, three screws and change/fix any gear on it while its still on the rig

[ROWDY RACING]

Originally Posted by TEDROCKZ

Very convenient in whilst in a hurry. One tire, three screws and change/fix any gear on it while its still on the rig

They need a screw at the front of the case, I notice some separation, and if you flex the tubes you can see it expand.

[Szczerba]

Originally Posted by ROWDY RACING

They need a screw at the front of the case, I notice some separation, and if you flex the tubes you can see it expand.

There are 4 case screws. Previous owner must have shaved it off. Pretty common to do it for 2.2 rigs. I left mine.

[ROWDY RACING]

Originally Posted by Szczerba

There are 4 case screws. Previous owner must have shaved it off. Pretty common to do it for 2.2 rigs. I left mine.

Ah, I see a flat spot on the front of the cases where it must have been shaved.

[JeremyH]

You'll be fine with 3.

[TEDROCKZ]

[ROWDY RACING]

Originally Posted by TEDROCKZ

Yes I have been lazy with this build.