JSLICK's SUPER

[Purptr8r]

Originally Posted by Jslick

Yeah, that lasted about 5 min. of driving before it stripped out. It was poor quality. Have two robotronics horns on it now. I was able to get it out on the rocks yesterday for about 20 min. Before the rain started. Purp, how big are the super wheels that you got cut?

Sent from my iPhone using Tapatalk

[Jslick]

I like the picture, however I need measurements like total height of wheel and of tire. I might have sam make me a set.

Originally Posted by Purptr8r

Sent from my iPhone using Tapatalk

[Jslick]

Got out the other day before it really started to rain. Still have lots of tuning to do. I am looking forward to getting this setup.

[Coachdod1]

Those hpi blasts look good too. If you get a custom set of wheels I would be interests in buying the blasts with the tires.

[Jslick]

Ordered up some new parts. Ok, I bought out some of the remaining parts for the super bully on RC4WD. There is snow on the ground, stuck inside and I am changing things before the season even starts. Waiting on my SUPER Pitbulls from Rockhumper and for my VOODOOs to arrive so I can try my hand at building some tires. Can you say cabin fever.

[Purptr8r]

Originally Posted by Jslick

Ordered up some new parts. Ok, I bought out some of the remaining parts for the super bully on RC4WD. There is snow on the ground, stuck inside and I am changing things before the season even starts. Waiting on my SUPER Pitbulls from Rockhumper and for my VOODOOs to arrive so I can try my hand at building some tires. Can you say cabin fever.

you ordered parts????? was my price not good enough for you baller status wanted to bling out retail prices......daaaaammmmmnnnnnnnnnnn:flipof f:

[Jslick]

Originally Posted by Purptr8r

you ordered parts????? was my price not good enough for you baller status wanted to bling out retail prices......daaaaammmmmnnnnnnnnnnn:flipof f:

Price was good but I needed to jump on it quick, I got the last of some of the parts I needed to get my axles the way I wanted. Thanks for the offer my man. If I would have waited I would have been stuck.

[Jslick]

Got some practice in before all the snow hit.

I have been enjoying the older style super bully axles, we were able to get the servo behind the axle but were limited to what pinion size I could run. To make any real changes to the rig I would have to go to a different turn motor. I did not like that option, I would rather change pinions. So I bought up a bunch of the remaining 65:1 super bully parts to have as spares and I will have more updates when the parts arrive next week.

[Jslick]

I got my 65:1 center cases yesterday, I was amazed at the difference in weight.

[filotr14lsdude]

Wait until you drive with them.
I done the same thing, went from 38:1 to 65:1
You'll love torque these things have.

[Jslick]

what motors are you running with the 65:1?

[ram_tough]

Ive been running 35t Looking good John. The fall was kind of disappointing, looking forward to MOAR rocks with another super in the mix!

[filotr14lsdude]

Originally Posted by Jslick

what motors are you running with the 65:1?

45t broods
14t pinions
8in wheels.
3s batts

[Jslick]

Thanks for the info

[Jslick]

Snowy winters are a pain here in the Northeast but it gives me a chance to get some things done. I have always used my COWRC mat to work on my rigs at home and in the field. I wanted to upgrade my work area. Heath was a Title Sponsor last year for the Northeast National Qualifier at Rausch Creek ORP here in PA. I contacted him and got myself a sweet 24"X24" mat.

Just the perfect size to wrench on my SUPER. It also came with two smaller parts trays.

Of course I could not leave well enough alone and started to put some of the sitckers from the awesome vendors here on RCC. It will take me quite sometime to fill this mat up.

65:1 cases all bolted up and ready to go when the snow melts.

[Coachdod1]

Did you get the dx6i? If so what were your thoughts on the sticks?

[Jslick]

I did not get the 6 yet. I'll get it later, the MT4 is a good setup. However I know that sticks will have more control.

[chris.martell]

That is one SLICK rig there slick!

[Jslick]

I am so ready for this snow to melt, I have new shocks on order through my local hobby shop, they should be here next week. Going to be running Gmade shocks, I like the length choices and how beefy the shock body and shafts are. This super is far from a light weight. I dont see SCX10 shocks holding up.

[DiabloPres]

Originally Posted by Jslick

I am so ready for this snow to melt, I have new shocks on order through my local hobby shop, they should be here next week. Going to be running Gmade shocks, I like the length choices and how beefy the shock body and shafts are. This super is far from a light weight. I dont see SCX10 shocks holding up.

You can never go wrong with big bores...just sayin...