"Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

Crawler Innovations acquired this rig in pieces back in 2014 from Almighty Malachi (Casey C.). The super had been disassembled for parts for other builds Casey had. The axles were still semi assembled but with plastic axle tops. Casey had originally built it to be an extremely light weight super. As stated, that was 2014, two years ago.

Fast forward to 2016 and I had finally collected all the parts to put it together. I'm not concerned about light weight, I need durability. Especially since I'm building this for my son Gavin. It needs to be strong, CI strong.


..Uploaded from the lab @ the C.I. Compound...

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

One of the first parts I required for this build was two Vanquish Products Aluminum XR-10 tops. It took a while to find them, even with CI's contacts and RCC. I had to purchase them both in sets, meaning the rear axle top came with the front, and since they were hard to find and in great condition, they came at a premium. Obviously complete electronics had to be acquired as well. I also knew the upper links Casey had used weren't going to work for the new build up. I contacted Purpmart for new custom length Titanium links. He was able to finally supply the links within a 6 month time frame LOL.


..Uploaded from the lab @ the C.I. Compound...

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

I stopped doing build threads, or build up threads - might be a more accurate term. Instead I'm finding it better to complete the crawler first, and then post the work to the forum backwards from there. Too often a project gets sold or parted out and the build thread is never finished. I was always pretty confident this build would get finished, I just didn't know when. Gavin has really been stepping up and making the hobby his own over the last few months. Between his new interest in the hobby and his offers to help, this project was accomplished quickly once all the parts were obtained.


..Uploaded from the lab @ the C.I. Compound...

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

"Myopic" the Y Town Crawlers Super Agent Chassis - Full Carbon Fiber

Both axles are front Axial XR-10 but built up with every aluminum part Vanquish Products made for the XR-10.
Tops, transmissions, motor plates, axle C's, wraith knuckles, upper link mounts,
The axle tops and case bottoms have been machined to fit 3/8" steel tube inside them. The tube is used to widen the axles for use with Wraith Long Side universals.
Both axles have complete Axial Hardened Steel Gear sets and Titanium top shafts.
Custom steering servo mounts front and rear
The 115mm rims are carbon fiber and made by Y Town Crawlers.
Tires were made by Casey C.
Foams are Crawler Innovations Super Nova Comp Cut.
Weight holder system by Y Town Crawlers.
Axial scx shocks, custom made up by Casey C.
Lower Titanium links made by Jeremy Toney.
Upper Titanium links made by Purpmart.
Rowdy Racing Front Battery Tray
Holmes Hobbies 45T Crawlmaster Motors
BWD Delrin Motor Savers x2
Robinson Racing 17T hardened pinions x2
Holmes Hobbies Dual Mini BRXL's
Castle Creation BEC x2
Hitec 7980 Front Servo
Hitec 7990 Rear Servo
Robitronic Servo Horns x2
Futaba R614FS receiver
Futaba 4PK
4 pairs of Micro Deans plugs and 2 pairs of small receiver plugs, everything is wired to be modular so that any piece can be field tested or programmed individually.
3S or 4S lipo, depending on course needs

http://uploads.tapatalk-cdn.com/2016...98b82aa0d2.jpg

http://uploads.tapatalk-cdn.com/2016...4dbeb2f5bd.jpg

http://uploads.tapatalk-cdn.com/2016...6f50317e69.jpg

http://uploads.tapatalk-cdn.com/2016...a6f3068d2b.jpg




..Uploaded from the lab @ the C.I. Compound...

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

More pictures:

http://uploads.tapatalk-cdn.com/2016...faa76bfa49.jpg
Looking through front wheel at front axle, above photo.

http://uploads.tapatalk-cdn.com/2016...5ff73ec6e3.jpg
Looking through rear wheel.

http://uploads.tapatalk-cdn.com/2016...44630c3658.jpg
Underside of front axle servo.

http://uploads.tapatalk-cdn.com/2016...a7990bf17a.jpg
Underside of rear axle servo mount. It's simply an engraved CI 1:10 servo guard that has been flipped upside down to be used as a mount instead. The opening for the servo had to be enlarged for the larger servo.

http://uploads.tapatalk-cdn.com/2016...497cc9a571.jpg
Rear axle servo

http://uploads.tapatalk-cdn.com/2016...7b2481adbd.jpg
Rear axle

http://uploads.tapatalk-cdn.com/2016...b5bbcf630b.jpg



..Uploaded from the lab @ the C.I. Compound...

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

A few more pictures;
http://uploads.tapatalk-cdn.com/2016...507c3e7517.jpg
Front axle. The front axle servo mount was made by Casey C. He intended for the servo to mount facing opposite of how it. I modified his mount for clearance of the linkage. By running the servo facing forward a longer drag link can be used.

http://uploads.tapatalk-cdn.com/2016...8da90d8e86.jpg

http://uploads.tapatalk-cdn.com/2016...e05d1da0bb.jpg

Regardless of how long it took, I'm glad it's completed and running. Some custom skinz by Freqeskinz are coming for it. I'm excited to get video footage of this Super. I will post here once we do.


..Uploaded from the lab @ the C.I. Compound...

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

Glad to see it all back together. "thumbsup"


The rear steer will work better if you rotate the top of the C's about 10 degrees towards the front of the car. Helps while trying to grab ledges and when you need to push the back of the car around with the rear steer cranked and rear burn.

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

Great job! Nice to see you get this car up and going.

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

1. Thank you Casey. BTW, do you still have the orange MT chassis that was part of the trade for this?

2. Thank you for the info, Gavin will try it out. I built this super for him and I'm rebuilding Rowdy's for myself.


Thank you Erik. Thank YOU for all the MOA axle parts you are making and offering up for the hobby. Comp crawling will once again return with dedicated vendors consistently making it easier to obtain parts. Nice work E"thumbsup"

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

The orange MT chassis is sitting in a box along with some mad force axles waiting for their turn. It's a ways down on the list but it will happen sometime soon.

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

it look good, the chassis is not too high?

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

I like how those axles were built instead of using the delrin tubes option we used to have. may I suggest modifying an axle c or 3d printing caps for where the c hubs used to bolt to on the axle? might be able to be a cheap insurance policy incase those tubes ever decide to twist in the housing. could also make it the full length out to the c hubs if 3d printed.

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

I suppose Gavin should be answering these posts:ror:, it's his super and updates that you are replying to. But I want to acknowledge these before posting an update.

Thank you. What do you mean by too high?

That's a good idea. However, this super is somewhat at a standstill currently. The upper link mounts come loose easily. Also, Gavin has concerns about the strength of the axle shafts with an 8" tall tire. We have discussed the possibility of selling this and building a Dlux Fab super for the lower gear ratios and stronger 8mm axle shaft parts.

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

A standstill? Dont give up on it lol. Its an xr super. I cant be the only one who has a soft spot for them.

Sent from my LGMP260 using Tapatalk

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

LOL. I guess it could be said I have a soft spot for XR supers. The ground clearance is absolutely ridiculous. I still have the "meat sword" XR Super for myself. There isn't a lot of challenging terrain for them, so they spend A LOT of time on there wall stand.

Re: "Myopic" A Super Agent XR-10 Build by Crawler Innovations
 

I wish i knew where my old xr super ended up.. I traded it back in 2014.

Maybe you guys can do something to fix the link mounts on this one.

Sent from my LGMP260 using Tapatalk