bruiser axles to run 12mm hubs

[jerrys800]

anyone know how i can run 12mm hubs on my original bruiser axles,i want to run 1.9 wheels on them so i can run in class 2 scalers,let me know thanks

[FlightInstrukta]

Want to mount 12mm hex wheels to your New Tamiya Bruiser?

[klabeaume]

Originally Posted by FlightInstrukta

Want to mount 12mm hex wheels to your New Tamiya Bruiser?

Those are only for the new bruiser axles.


http://www.rccrawler.com/forum/axles...t-axle-cs.html

[redjones]

These are my OG axles. Modified with TLT hub shafts, working on the rears. I will post pics when finished.

[cartronicshn]

i am debating if i should do the mod to my hilux axles, but i just can`t get parts to get my locking hubs to work again, if i do this i will surely miss the cool factor of the locking hubs

[redjones]

Originally Posted by cartronicshn

i am debating if i should do the mod to my hilux axles, but i just can`t get parts to get my locking hubs to work again, if i do this i will surely miss the cool factor of the locking hubs

The locking hubs are sweet. What don't you like? Lack of wheel options?

[cartronicshn]

I love everything about my hilux, except for the part that I can't get the locking hubcaps anymore , one is rounded out, I used to be able to get some once in awhile , but I haven't found any in a long time.

[blakeski]

Originally Posted by cartronicshn

I love everything about my hilux, except for the part that I can't get the locking hubcaps anymore , one is rounded out, I used to be able to get some once in awhile , but I haven't found any in a long time.

i love the hub factor!! i have a lead on a local hilux rtr , id like to get it and leave bone stock and just drive... i think old school stuff is just rad

[cartronicshn]

Originally Posted by blakeski

i love the hub factor!! i have a lead on a local hilux rtr , id like to get it and leave bone stock and just drive... i think old school stuff is just rad

x2 on the hub, it's just cool that you unlock/lock each front tire, drive in 2wd and get to place you need 4wd, the truck it's just spinning the rears and you just switch to 4wd and then lock the hubs, can get any more real than that. I just hope i can get the parts i need before i have to turn it into full time locked diff conversion

[chino63]

Originally Posted by jerrys800

anyone know how i can run 12mm hubs on my original bruiser axles,i want to run 1.9 wheels on them so i can run in class 2 scalers,let me know thanks

I have a set of these, they were not cheap when I bought them but will sell them for what I paid (I have no idea how much they are worth). One needs a bearing and has some minor cosmetic damage on the inside (bottom right in the 2nd pic). To my knowledge, they were never run and came off of a shelf queen when I purchased them. I personally never used them, been in a box of Bruiser stuff for at least 6 years. PM if interested.

[1BadJeepBruiser]

Originally Posted by chino63

I have a set of these, they were not cheap when I bought them but will sell them for what I paid (I have no idea how much they are worth). One needs a bearing and has some minor cosmetic damage on the inside (bottom right in the 2nd pic). To my knowledge, they were never run and came off of a shelf queen when I purchased them. I personally never used them, been in a box of Bruiser stuff for at least 6 years. PM if interested.

Made by Forrest AKA BruiserBuilder, they certainly were NOT CHEAP new I can tell ya that. I personally have not seen a set in over 5 years.

[chino63]

Originally Posted by 1BadJeepBruiser

Made by Forrest AKA BruiserBuilder, they certainly were NOT CHEAP new I can tell ya that. I personally have not seen a set in over 5 years.

That's the guy!

Thanks Mike!

[Ronin8451]

I love that Hilux, wanted one ever since it came out ! Those wheels are taking me back to the '80's for sure !

[h2recovery]

Wish the hilux was cheaper. The lockout hubs are awesome.

[cartronicshn]

Ha! Upon my request and several others asking for the ultra scale lockouts, I managed to secure a set for my hilux, hopefully I won't have wait much longer to get my hilux back to driving specs!

[cartronicshn]

it rides again, i finally got my locking hubs from Rogue Elements, thaks Chris for making these sweet works of art, top notch fit and finish
[/URL]

[hotrodsonoma]

Originally Posted by cartronicshn

it rides again, i finally got my locking hubs from Rogue Elements, thaks Chris for making these sweet works of art, top notch fit and finish
[/URL]

Wow brings back memories.the first og i ever had my hands on was a hilux with locking hubs.did a trade for a scaler i built from scratch for it.sure miss that thing.