Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Tamiya Bruiser
Loading

Notices

Thread: Any home made wheels adapters?

Reply
 
LinkBack Thread Tools Display Modes
Old 11-25-2019, 03:28 PM   #1
Newbie
 
Join Date: Mar 2012
Location: ohio
Posts: 34
Default Any home made wheels adapters?

I see all the bolt on wheel adapters that make the truck wider but I donít want to to be any wider has any body made there own? Iíve been all over the net and canít find anything
big specht is offline   Reply With Quote
Sponsored Links
Old 11-25-2019, 03:41 PM   #2
RCC Addict
 
Join Date: Jun 2004
Location: Bruiser Heaven!!!!
Posts: 1,463
Default Re: Any home made wheels adapters?

Which bruiser are you talking about.

The original bruiser will require modifications to run 12 mm and to have the rear axle narrowed to match the front axle.

Re release bruiser, you can use the 12 mm conversion kit from rc4wd. The rear axle will require modifications to be narrowed to match the front axle. If you use aftermarket wheels use can get different offsets to make the front match the rear.


Sent from my iPhone using Tapatalk
rocpede is offline   Reply With Quote
Old 11-25-2019, 08:55 PM   #3
Newbie
 
Join Date: Mar 2012
Location: ohio
Posts: 34
Default Re: Any home made wheels adapters?

Well I should have said that it was the hg-p407 clone. I bought it so I would screw up the old ones. But anyways all the ones I can find bolt to the oem hub and end up widening the truck a lot
big specht is offline   Reply With Quote
Old 11-25-2019, 09:01 PM   #4
RCC Addict
 
Join Date: Jun 2004
Location: Bruiser Heaven!!!!
Posts: 1,463
Default Re: Any home made wheels adapters?

Your talking about the aluminum 12 mm adapter off eBay. Back in the day, JPS made the adapters and correct offset wheels. That didnít make them wider. Those are rare and expensive, you could use the older 2.2 rear wheels from a Traxxas stampede. They should add that width to the truck.


Sent from my iPhone using Tapatalk
rocpede is offline   Reply With Quote
Old 11-25-2019, 09:26 PM   #5
Newbie
 
Join Date: Mar 2012
Location: ohio
Posts: 34
Default Re: Any home made wheels adapters?

Yea I seen some Different ones out there but there sold out or not for sale.
big specht is offline   Reply With Quote
Old 12-02-2019, 09:23 AM   #6
Newbie
 
Join Date: Mar 2013
Location: T-ride
Posts: 1
Default Re: Any home made wheels adapters?

Thingiverse has a variety of Bruiser/Hg P407 wheel adapters that you can print. If you don’t have access to a 3D printer, there are link where you can order prints.
Rc-archer is offline   Reply With Quote
Reply



Any home made wheels adapters? - Similar Threads
Thread Thread Starter Forum Replies Last Post
Home Made. Creepy Inc. Chit Chat 9 10-06-2010 09:48 AM
home made course skate General Crawlers 6 03-07-2008 12:44 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com