RCCrawler Forums

ebman74 · 01-13-2008, 02:23 PM

I have been into RC cars, boats ect. since the early days of RC madness! I'm talking Frog, Hornet, Lunchbox, Blackfoot you get the point! The last few years the Mini Rc thing hit me and really got me back into it all. I happened to read an article in Radio Control Car Action a couple years ago and found this new addiction! I have had three 66-77 Broncos and been into wheeling so this looked like a good fit for me. I started this rig in 06 when I found this site and am just starting to see a actual truck! I still have to finish it, but I have been moving along the last couple months. Everything was purchased from other members in the classified section here except a few things from rc4wd. Here is where I am and Where I plan on going...
*NN Chasis powder coated metalic black (this build took so long that hardley anyone still uses the NN!)
*Clod Axles locked with rc4wd metal locker, full bearings, cvds, rc4wd top link mounts, rc4wd tubes, jp knuckles, rc4wd 23mm adapters/wideners, rc4wd servo mounts and steering links
*Two Integy 55T motors
*Novack Super Duty (also bought early on, may up grade to two mamba maxes)
*Integy piggy back shocks
*TQ3 with rear steer
*Two 2 cell 1500 li-pos
*Custom Derlin Links from Finishline rc
*Moab Xls on Proline wheels
Still need JR 8700 servos and maybe twin Mamba Maxes.
Next is a 2.2. Hopefully it won't take so long!! Here are some pictures...

ebman74 · 01-13-2008, 02:35 PM

Sorry...

Kamikaze · 01-13-2008, 02:56 PM

Thats a nice lookin truck, you will like the NN.

jagg · 01-13-2008, 03:55 PM

Build time doesn't matter, as long as your satified with the results. Then again.............Is any truck really finished

.

01-13-2008, 02:23 PM	#1
ebman74 Newbie Join Date: May 2006 Location: Northern Virginia Posts: 21	My First Build/NN Clod I have been into RC cars, boats ect. since the early days of RC madness! I'm talking Frog, Hornet, Lunchbox, Blackfoot you get the point! The last few years the Mini Rc thing hit me and really got me back into it all. I happened to read an article in Radio Control Car Action a couple years ago and found this new addiction! I have had three 66-77 Broncos and been into wheeling so this looked like a good fit for me. I started this rig in 06 when I found this site and am just starting to see a actual truck! I still have to finish it, but I have been moving along the last couple months. Everything was purchased from other members in the classified section here except a few things from rc4wd. Here is where I am and Where I plan on going... NN Chasis powder coated metalic black (this build took so long that hardley anyone still uses the NN!) Clod Axles locked with rc4wd metal locker, full bearings, cvds, rc4wd top link mounts, rc4wd tubes, jp knuckles, rc4wd 23mm adapters/wideners, rc4wd servo mounts and steering links Two Integy 55T motors Novack Super Duty (also bought early on, may up grade to two mamba maxes) Integy piggy back shocks TQ3 with rear steer Two 2 cell 1500 li-pos Custom Derlin Links from Finishline rc *Moab Xls on Proline wheels Still need JR 8700 servos and maybe twin Mamba Maxes. Next is a 2.2. Hopefully it won't take so long!! Here are some pictures...

01-13-2008, 02:35 PM	#2
ebman74 Newbie Join Date: May 2006 Location: Northern Virginia Posts: 21	pictures... Sorry... Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-13-2008, 02:56 PM	#3
Kamikaze I wanna be Dave Join Date: Oct 2005 Location: Columbia TN Posts: 6,154	Thats a nice lookin truck, you will like the NN.

01-13-2008, 03:55 PM	#4
jagg Quarry Creeper Join Date: Oct 2006 Location: where fear and common sense don't get in the way Posts: 451	Build time doesn't matter, as long as your satified with the results. Then again.............Is any truck really finished .

Sponsored Links

RCCrawler Forums

Thread: My First Build/NN Clod