| |
01-06-2010, 02:55 PM
| #261 |
| Newbie Join Date: Feb 2008 Location: AK
Posts: 27
| 
Here's mine right now, still a work in progress. Heck it's been sittin for some years, i'm playing catch up with the new times, HEHE..  |
|  |
| Sponsored Links | |
| | |
|
01-18-2010, 08:09 PM
| #262 |
| Newbie  Join Date: Mar 2007 Location: cda
Posts: 33
|
well heres a pic of my clod 17" wb pimp cane with 40 series moab narowed an 1 1/8 per corner, twin sticked with 2 rooster 12 turn esc and 2 50 turn lathe with 9 tooth pinions, run 2 4000 mah 2s lipos as well.  |
|
| |
|
01-23-2010, 04:52 PM
| #263 |
| Newbie Join Date: Jan 2010 Location: Mackinaw City
Posts: 3
|
started working on this two years ago, this is the 3rd chassis I have made for it. its been a lot of fun changing, ajusting and making new parts for it.  Hitec hs-5955tg frount & rear 65t lathe motors jb weld lockers novak 14.4 esc moab xl on narrowed axial beadlocks specktrum dx6i w/ar6000 anodized aluminum frame and link arms 3s 1500mah lipo |
|
| |
|
05-31-2010, 08:41 AM
| #264 |
| Newbie Join Date: May 2009 Location: Farmington
Posts: 9
| clod/ axial / crawler/ monster
just for fun lots of parts from many diff kits
|
|
| |
|
07-10-2010, 05:57 PM
| #265 |
| Rock Stacker Join Date: Oct 2008 Location: debary fl
Posts: 53
|  debary fl   |
|
| |
|
08-29-2010, 04:30 AM
| #266 |
| Quarry Creeper Join Date: Jul 2007 Location: EWA BOUND
Posts: 374
|    Last edited by U DOWN; 08-29-2010 at 04:33 AM. |
|
| |
|
10-04-2010, 01:54 PM
| #267 |
| Pebble Pounder Join Date: Dec 2008 Location: Belgium
Posts: 184
|
2.2 Clod Crawler Homemade pimp cane 2 x 55T Novak Rooster Crawler Dig Epic beadlocks with Rovers    |
|
| |
|
11-10-2010, 02:22 AM
| #268 |
| Pebble Pounder Join Date: Oct 2010 Location: Maui, Hawaii
Posts: 131
|    |
|
| |
|
12-21-2010, 09:12 PM
| #269 |
| Rock Crawler Join Date: May 2008 Location: in a small town
Posts: 594
| Jps Clod
not an action shot, cause i just got it  |
|
| |
|
02-02-2011, 08:30 AM
| #270 |
| Newbie Join Date: Feb 2011 Location: kansas
Posts: 24
|
Built this in Iraq in 06'07' now in pieces but planning on bringin back to life!  |
|
| |
|
02-10-2011, 08:46 AM
| #271 |
| Newbie Join Date: Dec 2008 Location: Elizabethtown, Pennsyltucky
Posts: 41
| Poser...  |
|
| |
|
02-13-2011, 09:47 AM
| #272 |
| Quarry Creeper Join Date: Feb 2011 Location: Mahwah
Posts: 199
|
Does this count as an action shot?   This is my brushhess Zilla II parked on my Boy's Hornet. And yes the picture is posed...  I did do something similar on accident while we were out bashing though. I owe him a new wing...The specs: ESP Zilla II chassis TTR ball diff (front) CPE locker (rear) Steel pinions CPE inner and outer axle stiffeners Rockzilla streering kits, with heavy duty rods CPE metal gear servos, with HD servo savers CPE 2" wheel widening kit Emaxx shocks Sidewinder 4600's 2s 30C 5200 MAH Turnigy battery Ebay skid plates Guess that's everything. The truck is actually in peices right now to repair a little "breakage"... I actually ordered aluminum tubes and knuckles from JP's. He's actually how I came across this site. I also ordered a set of HR aluminum gear cases. Hopefully It'll be up and running again soon. |
|
| |
|
02-25-2011, 11:49 PM
| #273 |
| Newbie Join Date: Feb 2011 Location: Las Vegas
Posts: 30
| Here is mine
I built her about 20 years ago, Most chassis parts are from hardware store. Dual Bats, Dual ESC. Here is how she looked for the last 20  After a little fine tuning and a chassis paint job.  almost 90 degrees of articulation  In the Rocks  Last edited by SlightlySick; 02-28-2011 at 10:15 PM. |
|
| |
|
03-31-2011, 08:59 PM
| #274 |
| Newbie Join Date: Feb 2011 Location: Bangkok TH
Posts: 13
|
My Clod Buster (Original)    |
|
| |
|
05-30-2011, 10:32 AM
| #275 |
| Newbie Join Date: May 2011 Location: Ocean side
Posts: 34
| My clod
Here is my clod that i have been working on for the last week or so. i been bit by the crawler bug. I have narrowed the tires down M2 with two 55 turn motors 9 tooth pinion hit tech servos with front and rear steer lock out front and rear diff's from axle to axle is 16 inch with a four link system that i fabed. six channel radio looking to upgrade that next |
|
| |
|
02-12-2012, 06:15 AM
| #277 |
| Rock Stacker Join Date: Apr 2006 Location: Gardner
Posts: 69
| Re: The Rock-Clod Gallery: A place to post u'r clod in action!
Here's my custom clod...                     Last edited by kredfearn; 02-12-2012 at 06:17 AM. |
|
| |
|
03-12-2012, 10:07 PM
| #278 |
| RCC Addict Join Date: Feb 2008 Location: Nevada
Posts: 1,267
| Re: The Rock-Clod Gallery: A place to post u'r clod in action!
the CLOD     |
|
| |
|
04-05-2012, 11:31 AM
| #279 |
| Quarry Creeper Join Date: Dec 2009 Location: Grass Valley Ca
Posts: 326
|
Here are my clods.
|
|
| |
|
04-26-2012, 04:52 PM
| #280 |
| Newbie Join Date: Mar 2012 Location: marshall
Posts: 39
| Re: The Rock-Clod Gallery: A place to post u'r clod in action!
My clod concoction...........
|
|
| |
 |
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/tamiya-clod-buster/1878-rock-clod-gallery-place-post-ur-clod-action.html | ||||
| Posted By | For | Type | Date | |
| RC-TRIAL.PL :: Zobacz temat - nacieszcie oczęta :D | This thread | Refback | 02-19-2013 09:33 AM | |
| |
Linear Mode
