Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Superclass Crawlers > Tamiya Clod Buster
Loading

Notices

Thread: The Rock-Clod Gallery: A place to post u'r clod in action!

Reply
 
LinkBack Thread Tools Display Modes
Old 09-10-2005, 09:40 PM   #41
CSR
RCC Addict
 
Join Date: Jun 2004
Location: SERCRC
Posts: 1,680
Default

Here's mine.

Homemade chassis/servo mount/link posts, 2.2" Masher 2K's/'Pede rear wheels, Integy 55 turns w/13 tooth pinions,
Super Rooster, HS645MG servo, 12.5" wheelbase, Maxx shocks and Maxx turnbuckles for links


CSR is offline   Reply With Quote
Sponsored Links
Old 09-11-2005, 08:24 AM   #42
Rock Stacker
 
Join Date: Jul 2005
Location: Fayetteville, AR
Posts: 92
Default

Finally feel like I've got my Clod "done."

CX2 chassis, Lathe motors, Super Rooster, modded TQ3, 6 cell GP3700s, HS-645MGs, PL Commando Beadlocks narrowed 1", PL Moabs, Bender 23mm adapters, RC4wd alloy gears and lockers, CMR adjustable motor mounts, 9t pinions, Powerline Tmaxx shocks.

Only other thing I'd like to do is TTR CVDs.

And my driving skills are slowly coming up to match the capabilities of the truck.

-Jay
Attached Images
   
BigJay is offline   Reply With Quote
Old 09-14-2005, 03:40 PM   #43
Rock Stacker
 
Join Date: Aug 2005
Location: Tenerife Island - Spain
Posts: 52
Default

Hello, here are any pics of my clod.

































Pepi is offline   Reply With Quote
Old 09-16-2005, 07:43 AM   #44
Newbie
 
Join Date: Jul 2005
Location: Lakin
Posts: 12
Default Sod Krawler

Home made chassis and links.
Traxxas rod ends.
Hot glue locked diffs with bearings.
RCGuy C braces, adj. motor mounts & 8T pinions
RC4WD upper 4-link mount and skid plate.
Integy 55T lathe motors.
Team Orion stick packs.
EVX speed control.
TQ3 radio with rear steer toggle mod.
HS-645 steering servos.
Traxxas shocks and rod ends.
Stock wheels narrowed on the inside, stock tires.
New Bright Raminator body.










Last edited by crosstie69; 09-16-2005 at 07:46 AM.
crosstie69 is offline   Reply With Quote
Old 09-22-2005, 02:35 PM   #45
Newbie
 
Join Date: Sep 2005
Location: Lubbock
Posts: 41
Default

Here is mine.




reaganreagan is offline   Reply With Quote
Old 09-22-2005, 03:25 PM   #46
I wanna be Dave
 
SVEN's Avatar
 
Join Date: Feb 2005
Location: Burnsville
Posts: 3,096
Default

My clod is always changing, but this is the most recent version.

16" wb
No-link design
stick chassis
Behind the Axle steering
Independant front and rear steering
Tekin Rebel 2
(2) HS-645mg servos
Integy Lathe motors
8 tooth pinions
Inetrc Clod axles
Inetrc differential lockers
Novak Xxtra reciever
JR XR3 radio
XTM Thorn wheels
Proline Moabs
Ace's wheel adapters
Proline Rock Pleazer body








Last edited by SVEN; 02-02-2006 at 05:37 PM.
SVEN is offline   Reply With Quote
Old 10-09-2005, 01:10 AM   #47
Newbie
 
Join Date: Aug 2005
Location: Calgary Alberta Canada Eh
Posts: 16
Default

heres my buddys Clod flexing by his work









Bogger4life is offline   Reply With Quote
Old 10-13-2005, 08:44 PM   #48
I wanna be Dave
 
Join Date: Jul 2005
Location: Cedar Rapids
Posts: 2,028
Default

Here are some pics of a set together.
1 link suspension
16.5 wheelbase
Super rooster
TQ3
Corian center skid
Spring steel steering links.
Attached Images
   
Cole82 is offline   Reply With Quote
Old 10-30-2005, 03:01 PM   #49
Quarry Creeper
 
Join Date: May 2004
Location: Boobslando, florida
Posts: 323
Default



and about 3 min later

bulletproofcustoms is offline   Reply With Quote
Old 11-07-2005, 06:27 PM   #50
I wanna be Dave
 
Join Date: Jun 2005
Location: drillin Holes for the man
Posts: 2,736
Default The Mountain Goat

she crawlers like nobodies business


18.5" wb
5.5"gc
55t INTEGY lathes
EVX speedo
TQ3 with my rear mod
home grown chassis and high clearance links
15KG servos




bigflex is offline   Reply With Quote
Old 11-10-2005, 06:17 PM   #51
Newbie
 
Join Date: Nov 2005
Location: Galax
Posts: 11
Default

Here is a pic of my first clod crawler. I made the chassis,4 links,front servo mount and rear steer lockout. The shocks are some i had left over from my t-maxx. I cut the clod wheels down with the stock tires.I have to make some longer upper link mounts.I'll be switching the gravedigger body out for the bronco body soon.
VA CLOD is offline   Reply With Quote
Old 12-01-2005, 12:02 AM   #52
Newbie
 
Join Date: Jul 2005
Location: CA
Posts: 6
Default

heres my clod

stock chassis, front locked w/ 10t, rear locked w/ 9t, super rooster, 55t lathe motors, white duct tape keeping body together.



88chevy is offline   Reply With Quote
Old 12-08-2005, 12:08 AM   #53
Newbie
 
Join Date: Dec 2005
Location: usa
Posts: 6
Default

gecko 2 60/40 pro
fjp51 is offline   Reply With Quote
Old 12-10-2005, 03:55 PM   #54
Newbie
 
INVINCIBLE's Avatar
 
Join Date: Nov 2005
Location: ROCKY RICHMOND KY
Posts: 16
Default my clod showing off

rock bull chassis 16"w/b
narrowed moabs
integy's 55turn
novak super duty

and a picture of my .21 conversion EMAXX
Attached Images
    

Last edited by INVINCIBLE; 12-10-2005 at 03:58 PM.
INVINCIBLE is offline   Reply With Quote
Old 12-21-2005, 11:10 PM   #55
Newbie
 
Join Date: Oct 2005
Location: In the woods
Posts: 5
Default My Clod Project

This is what my Clod looks like at the present time. I decided to use my old Clodzilla 4 chassis and go from there.
It really acually works pretty well, though it probably would have been easier just to build a new chassis.

Moab XL's
Super Rooster
Integy motors
Independent front and rear steer using a Futaba 3PDF FM radio
17" wheelbase





Last edited by WazyLayne; 02-01-2006 at 09:02 PM.
WazyLayne is offline   Reply With Quote
Old 12-26-2005, 04:52 PM   #56
Pebble Pounder
 
Join Date: Nov 2005
Location: fairfield
Posts: 191
Default

15'' wb
3.5'' gc
integy 65t's
8 tooth pinions
super duty esc
dual 7.4 lipos
tq3 radio

BLK6.0HD is offline   Reply With Quote
Old 12-28-2005, 04:23 PM   #57
Rock Stacker
 
Tonsa's Avatar
 
Join Date: Oct 2005
Location: Salisbury
Posts: 88
Default Finally a worthy picture (GASP...on rocks)

Finally got a few rocks in the back yard to play on. Also new body and different tires. The Imex tires just werent sticking too well.
Attached Images
 
Tonsa is offline   Reply With Quote
Old 12-29-2005, 08:47 AM   #58
Rock Stacker
 
Join Date: Oct 2005
Location: Long Island
Posts: 67
Default

16" WB
NN chassis
RUbicon body
clod axles
(2) 645mg Hitec
F&R steering
TQ3
Narrowed Velocity 6 40 series
Moab XL
cheap 1700mah
SUper R
8 tooths





JAKEF150FX4 is offline   Reply With Quote
Old 12-31-2005, 09:59 PM   #59
Newbie
 
Join Date: Jan 2005
Posts: 39
Default tuber clod

tuber chassie
16'' wb
http://img522.imageshack.us/img522/3...zuki0537ip.jpg
http://img524.imageshack.us/img524/5...zuki0017bn.jpg
sux38 is offline   Reply With Quote
Old 01-05-2006, 08:16 AM   #60
Newbie
 
Join Date: Jan 2006
Location: England
Posts: 3
Default Mine

Here is mine built on a stock Clod Chassis. I saw all of the tube stuff out there but wanted to try something different. It works very well. I just need to lower the CG more.
Muttrk is offline   Reply With Quote
Reply



LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/tamiya-clod-buster/1878-rock-clod-gallery-place-post-ur-clod-action.html
Posted By For Type Date
RC-TRIAL.PL :: Zobacz temat - nacieszcie oczęta :D This thread Refback 02-19-2013 10:33 AM

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com