RCCrawler Forums

SMR4RUNNER · 06-21-2006, 08:57 AM

Nice to see someone using bodies other than the Jeeps and Broncos.

Here's my new lid using the same Parma Tundra body. It is a spin off of the legend Ivan "Ironman" Stewart's Baja rig.

62PYRO · 06-24-2006, 11:30 AM

Here's a few of pics of my Clod.

Truck Base : Clod

ESC: Super Rooster

Motor(s): Integy 55t lathes

Servo(s): Hitec hs 5645 mg

Trans: n/a

Axles: custom aluminum Clod

Tires: Moab xl's

WB: 16-3/4"

Overall Width: 13"

Diff clearance: 2"

Center Chassis clearance:4-3/4"

Overall height: 12"

BugFreak · 07-01-2006, 03:40 PM

Now I've got a crawler of my own! At last!!
Need some shorter shocks though... and a better body..

Link · 07-08-2006, 09:42 AM

My Rockbull,

Truck Base : Clod

ESC: TR2

Motor(s): Integy 55t lathes

Servo(s): Hitec hs 5645 mg

Trans: n/a

Axles: Clod

Tires: Moab 40 series

Monkeyboy · 07-08-2006, 02:49 PM

Truck Base : Home made

ESC: TR2

Motor(s):Integy 55t

Servo(s): hitek645

Trans: clod

Axles:clod

Tires:Moab XL's Narrowed and dyed Cheyenne beadlocks

WB:17.5"

Overall Width: ?

Diff clearance: ?

Center Chassis clearance: 4.25"

Overall height:?

http://beer.thisdysfunctional.org/~m.../Frstcrawl.jpg
http://beer.thisdysfunctional.org/~m.../Newshoes4.jpg
http://beer.thisdysfunctional.org/~m.../Newshoes6.jpg

worrdogg · 07-12-2006, 04:08 PM

Here is my 2.2 Clod

ESC: Super Rooster
Motor(s): Integy 55t
Servo: hitec 645
Axles:clod
Tires: Imex All-Ts
WB:12.5"
Center Chassis clearance: 4.25"
Wheels: RC4wd 2.2 Narrow BeadLocks

Flash Burns · 07-12-2006, 05:29 PM

She's hittin' the rocks this weekend!!!

CPE Evolution Chassis 16" w/carbon fiber links
Integy 55T's
9t pinions
Super Rooster
Bad Boy Billet shocks
Mickey Thompson Baja Claw's

lilcurtis · 07-19-2006, 02:18 PM

Here is mine. Started as a clodzilla 4 chassis and kinda went from there. The antena now runs on the inside of the body as apposed to the actual rod sticking out the top.

Chassis: Clodzilla 4 with custom hex links and body mounts.
ESC: Tekin rebel 2 with 2 hitech servos.
Radio: TQ3 baby! lol.
Tires: Obviously Moabs.

i havnt changed the motors on it yet seeing as i cant seem to get tower to have the lathe motors in stock.

4stAir · 07-20-2006, 11:15 PM

well here is mine
nn chassis
16.5 wb
55t's 8t & 9t
rbl2
rc4wd stuff throughout

swamp_rat · 07-21-2006, 01:59 PM

swamp rat
yes..its a backyard crawler..yes its ghettofied
homemade chassis, upper link mounts, etc
dezfan carbon fiber links
stock silver cans
rear locked diffs
moped

Link · 07-28-2006, 11:10 PM

Finished FJ40 body,

takzi · 08-10-2006, 08:52 PM

Here is my Gmade Clod

Shell: Proline Nissan Titan
Chassis: Gmade Spider
Wheelbase: 16"
Clearance: 3.5" to 4.5"
Motor: 55T Lathe
Servo: Hitec 5955(front) & Sanwa ERG-VX (Rear)
ESC: TR2
Tires & Rims: Gmade
Others: RC4WD widener

fletch · 08-13-2006, 10:24 AM

FLETCH
Age: 32
Location: SN BERNRDNO
Crawler Name: CRAWLINSTIN
Class: SUPER
Specs: CLOD
55T 9TPIN
MOAB XL HPI RIMS
NOVAK SUPER DUTY
TQ3

Photo Here: http://photos.yahoo.com/crawlinstin

VIDEO ]http://www.putfile.com/fletch00
video http://video.google.com/videoplay?do...82699121636887

_________
|__|_[_____]_
|_[_L__ (o==o) _
'''\/--\/-\/--\/
()_)O()_)O=)_)

http://www.socalrcrc.com

Poecl · 08-21-2006, 11:15 AM

Hello My Clod.

Marcelo.
Age: 31
Location: Santiago Chile
Crawler Name: NiÑo
Class: SUPER
Specs: CLOD
Chassis: NN
Wheelbase: 16,5"
Clearance: 4,5" to 5,5"
Motor: 55T Lathe
9TPIN
MOAB XL Commandos Narrowed Wheels
TR2
JR Racing X3

4link4eva · 08-21-2006, 01:38 PM

Axles: Clod
Chassis: custom
Links: custom
Body: You tell me

Motors: Axiom 55t with stock pinions

Cheers

CRAZYRT · 08-27-2006, 04:30 PM

Modded Clod IV Chassis 17" WB
JB'd diffs
SS Axle braces inner and upper
SS Servo Mounts
SS F&R skid plates
SS .25" 6" F & 7" R links w/Dubro 6/32 Monster ends
Savage shocks (soon replacing w/1/8 scale buggy shocks
TR2
9T Pinions and MM's
645MG's F&R
PL Cheyenne BL's and Moab XL's
RC4WD 23mm wideners
Battery packs on axles soon

dezfan · 09-04-2006, 05:08 PM

The latest versions of the CORPORAL (Super) and GRUNT (2.2)

Both are shockless torsion chassis. The Super is a CPE CLAW and the 2.2 is a Pimp Cane.

beatnbruised · 09-12-2006, 03:29 PM

Here is mine, although its never done.

Clod axles
JBed diffs
Integy 55 turns
9, 10t pinions
Thundertech motor mounts
GPM knuckles
Super Rooster
TowerPro MG995 servos
Moab 40s
Velocity 6 wheels
TQ3
Integy Maxx shocks
unknown wheel adapters
G-made upper link mounts
arrow shaft upper links
17" wheel base

426rider · 09-18-2006, 03:29 AM

My floating alum angle torsion clod 16"wb
integy 55t motors
stock gearing
TR2
MG995s
proportional rear steer from modded TQ3
stock tires for now

nico14 · 09-20-2006, 03:41 PM

- Clod Axles locked
- Wheelbase 17.3
- Integy 65T
- RC4WD's reduction gear unit
- HS-645MG x2
- Super Rooster
- TQ3 with third independent way
- E-MAXX schocks with hard MGT's springs
- G-made Wheel wideners 14mm
- Maximizer Beadlocks
- LST Tires
- 10.9 lbs

Some photographs:

On the photographs, electronics is not put yet and the Rock rings are not still painted.

Nico14

06-21-2006, 08:57 AM	#101
SMR4RUNNER Rock Crawler Join Date: Jan 2006 Location: PNW!!! Posts: 747	Nice to see someone using bodies other than the Jeeps and Broncos. Here's my new lid using the same Parma Tundra body. It is a spin off of the legend Ivan "Ironman" Stewart's Baja rig. Last edited by SMR4RUNNER; 06-21-2006 at 09:01 AM.

06-24-2006, 11:30 AM	#102
62PYRO Rebirth of an asshole Join Date: Oct 2004 Location: Gresham Posts: 4,497	The Jester Here's a few of pics of my Clod. Truck Base : Clod ESC: Super Rooster Motor(s): Integy 55t lathes Servo(s): Hitec hs 5645 mg Trans: n/a Axles: custom aluminum Clod Tires: Moab xl's WB: 16-3/4" Overall Width: 13" Diff clearance: 2" Center Chassis clearance:4-3/4" Overall height: 12" Attached Images

07-01-2006, 03:40 PM	#103
BugFreak Newbie Join Date: Sep 2005 Location: Tromso - Norway Posts: 6	My first crawler! Now I've got a crawler of my own! At last!! Need some shorter shocks though... and a better body..

07-08-2006, 09:42 AM	#104
Link Quarry Creeper Join Date: Jul 2006 Location: N. Phoenix Posts: 440	My Rockbull, Truck Base : Clod ESC: TR2 Motor(s): Integy 55t lathes Servo(s): Hitec hs 5645 mg Trans: n/a Axles: Clod Tires: Moab 40 series Attached Images

07-12-2006, 04:08 PM	#106
worrdogg Newbie Join Date: May 2006 Location: Hawaii Posts: 35	My 2.2 Clod Here is my 2.2 Clod ESC: Super Rooster Motor(s): Integy 55t Servo: hitec 645 Axles:clod Tires: Imex All-Ts WB:12.5" Center Chassis clearance: 4.25" Wheels: RC4wd 2.2 Narrow BeadLocks Last edited by worrdogg; 07-26-2006 at 12:32 PM.

07-08-2006, 02:49 PM	#105
Monkeyboy Rock Stacker Join Date: Dec 2004 Location: Antioch Posts: 97	Truck Base : Home made ESC: TR2 Motor(s):Integy 55t Servo(s): hitek645 Trans: clod Axles:clod Tires:Moab XL's Narrowed and dyed Cheyenne beadlocks WB:17.5" Overall Width: ? Diff clearance: ? Center Chassis clearance: 4.25" Overall height:? http://beer.thisdysfunctional.org/~m.../Frstcrawl.jpg http://beer.thisdysfunctional.org/~m.../Newshoes4.jpg http://beer.thisdysfunctional.org/~m.../Newshoes6.jpg

07-12-2006, 05:29 PM	#107
Flash Burns Pebble Pounder Join Date: Feb 2006 Location: In a rock crawler down by the river Posts: 118	My CPE crawler She's hittin' the rocks this weekend!!! CPE Evolution Chassis 16" w/carbon fiber links Integy 55T's 9t pinions Super Rooster Bad Boy Billet shocks Mickey Thompson Baja Claw's Last edited by Flash Burns; 07-13-2006 at 03:57 PM.

07-19-2006, 02:18 PM	#108
lilcurtis Rock Stacker Join Date: Apr 2005 Location: waconia Posts: 67	Here is mine. Started as a clodzilla 4 chassis and kinda went from there. The antena now runs on the inside of the body as apposed to the actual rod sticking out the top. Chassis: Clodzilla 4 with custom hex links and body mounts. ESC: Tekin rebel 2 with 2 hitech servos. Radio: TQ3 baby! lol. Tires: Obviously Moabs. i havnt changed the motors on it yet seeing as i cant seem to get tower to have the lathe motors in stock.

07-20-2006, 11:15 PM	#109
4stAir RCC Addict Join Date: Jan 2006 Location: The Amish Ghetto Posts: 1,932	well here is mine nn chassis 16.5 wb 55t's 8t & 9t rbl2 rc4wd stuff throughout Attached Images

07-21-2006, 01:59 PM	#110
swamp_rat Quarry Creeper Join Date: Jun 2006 Location: boondocks Posts: 253	swamp rat yes..its a backyard crawler..yes its ghettofied homemade chassis, upper link mounts, etc dezfan carbon fiber links stock silver cans rear locked diffs moped

07-28-2006, 11:10 PM	#111
Link Quarry Creeper Join Date: Jul 2006 Location: N. Phoenix Posts: 440	Finished FJ40 body, Attached Images

08-10-2006, 08:52 PM	#112
takzi Newbie Join Date: Jul 2006 Location: Pitlane Posts: 25	Here is my Gmade Clod Shell: Proline Nissan Titan Chassis: Gmade Spider Wheelbase: 16" Clearance: 3.5" to 4.5" Motor: 55T Lathe Servo: Hitec 5955(front) & Sanwa ERG-VX (Rear) ESC: TR2 Tires & Rims: Gmade Others: RC4WD widener

08-13-2006, 10:24 AM	#113
fletch Rock Crawler Join Date: Aug 2006 Location: SoCal Posts: 582	Fletch Clod FLETCH Age: 32 Location: SN BERNRDNO Crawler Name: CRAWLINSTIN Class: SUPER Specs: CLOD 55T 9TPIN MOAB XL HPI RIMS NOVAK SUPER DUTY TQ3 Photo Here: http://photos.yahoo.com/crawlinstin VIDEO ]http://www.putfile.com/fletch00 video http://video.google.com/videoplay?do...82699121636887 _________ \|__\|_[_____]_ \|_[_L__ (o==o) _ '''\/--\/-\/--\/ ()_)O()_)O=)_) http://www.socalrcrc.com Last edited by fletch; 10-29-2006 at 07:13 PM.

08-21-2006, 11:15 AM	#114
Poecl Newbie Join Date: Aug 2006 Location: Chile Posts: 1	Clod Santiago de Chile Hello My Clod. Marcelo. Age: 31 Location: Santiago Chile Crawler Name: NiÑo Class: SUPER Specs: CLOD Chassis: NN Wheelbase: 16,5" Clearance: 4,5" to 5,5" Motor: 55T Lathe 9TPIN MOAB XL Commandos Narrowed Wheels TR2 JR Racing X3 Last edited by Poecl; 08-24-2006 at 10:38 AM.

08-21-2006, 01:38 PM	#115
4link4eva RCC Addict Join Date: May 2006 Location: In England, looking for the threadlock... Posts: 1,150	Here ya go, enjoy Axles: Clod Chassis: custom Links: custom Body: You tell me Motors: Axiom 55t with stock pinions Cheers Last edited by 4link4eva; 11-14-2006 at 02:25 PM.

Sponsored Links

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/tamiya-clod-buster/1878-rock-clod-gallery-place-post-ur-clod-action.html
Posted By	For	Type	Date
RC-TRIAL.PL :: Zobacz temat - nacieszcie oczêta :D	This thread	Refback	02-19-2013 10:33 AM

08-27-2006, 04:30 PM	#116
CRAZYRT Rock Stacker Join Date: Mar 2006 Location: SSF Posts: 63	Frankenstone IT LIVES!!! Modded Clod IV Chassis 17" WB JB'd diffs SS Axle braces inner and upper SS Servo Mounts SS F&R skid plates SS .25" 6" F & 7" R links w/Dubro 6/32 Monster ends Savage shocks (soon replacing w/1/8 scale buggy shocks TR2 9T Pinions and MM's 645MG's F&R PL Cheyenne BL's and Moab XL's RC4WD 23mm wideners Battery packs on axles soon Last edited by CRAZYRT; 08-27-2006 at 04:32 PM.

09-04-2006, 05:08 PM	#117
dezfan I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK. Posts: 12,563	The latest versions of the CORPORAL (Super) and GRUNT (2.2) Both are shockless torsion chassis. The Super is a CPE CLAW and the 2.2 is a Pimp Cane. Attached Images

09-12-2006, 03:29 PM	#118
beatnbruised Rock Stacker Join Date: Aug 2006 Location: Fenton, MO Posts: 70	Here is mine, although its never done. Clod axles JBed diffs Integy 55 turns 9, 10t pinions Thundertech motor mounts GPM knuckles Super Rooster TowerPro MG995 servos Moab 40s Velocity 6 wheels TQ3 Integy Maxx shocks unknown wheel adapters G-made upper link mounts arrow shaft upper links 17" wheel base Last edited by beatnbruised; 09-13-2006 at 10:05 AM.

09-18-2006, 03:29 AM	#119
426rider Rock Stacker Join Date: Sep 2004 Location: Spanaway,WA Posts: 70	My floating alum angle torsion clod 16"wb integy 55t motors stock gearing TR2 MG995s proportional rear steer from modded TQ3 stock tires for now Last edited by 426rider; 09-18-2006 at 06:38 PM.

09-20-2006, 03:41 PM	#120
nico14 Newbie Join Date: Jan 2006 Location: Normandie Posts: 23	- Clod Axles locked - Wheelbase 17.3 - Integy 65T - RC4WD's reduction gear unit - HS-645MG x2 - Super Rooster - TQ3 with third independent way - E-MAXX schocks with hard MGT's springs - G-made Wheel wideners 14mm - Maximizer Beadlocks - LST Tires - 10.9 lbs Some photographs: On the photographs, electronics is not put yet and the Rock rings are not still painted. Nico14

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

RCCrawler Forums

Thread: The Rock-Clod Gallery: A place to post u'r clod in action!