09-16-2004, 07:11 PM | #1 |
Newbie Join Date: Aug 2004
Posts: 29
| The Rock-Clod Gallery: A place to post u'r clod in action!
Hey post pics of u'r clod if u would please so i can make mine better so i can get out there and crawl over (almost) everything Thanx Nate EDIT by Grizzly4x4: I made this a sticky so it will be here for easy reference. Post up your pics and stats but no chit chat. I will delete posts that dont belong. Thanks, Griz Last edited by Grizzly4x4; 01-26-2005 at 11:20 PM. Reason: To make it a sticky. |
Sponsored Links | |
09-17-2004, 12:08 AM | #2 |
Newbie Join Date: Sep 2004 Location: Aptos, Ca
Posts: 19
| Re: A place to post u'r clod in action!
Built buy skyjacker |
09-17-2004, 01:16 PM | #3 |
Quarry Creeper Join Date: Jul 2004 Location: Elizabeth City NC
Posts: 250
| Re: A place to post u'r clod in action!
mine...... |
09-17-2004, 01:17 PM | #4 |
Quarry Creeper Join Date: Jul 2004 Location: Elizabeth City NC
Posts: 250
| Re: A place to post u'r clod in action! |
09-17-2004, 01:19 PM | #5 |
Quarry Creeper Join Date: Jul 2004 Location: Elizabeth City NC
Posts: 250
| Re: A place to post u'r clod in action! |
09-19-2004, 08:05 PM | #6 |
Rock Crawler Join Date: May 2004 Location: Calgary
Posts: 807
| Re: A place to post u'r clod in action!
Here's some from the run that killed my Super Rooster............... Drivin' in to each photo..............and more importantly, driven out also. No posers shots here............................. EDIT by Griz: The wheelbase is currently sitting at 15.75", and seems to work well for most sittuations. The chassis is designed by myself, and is fully custom. http://www.rccrawler.com/postlite1644-lives.html With a lil' luck, that link should get ya some more info on it....... |
09-20-2004, 12:38 PM | #7 |
PapaGriz Yo Join Date: Apr 2004 Location: In the garage building the wife a crawler
Posts: 13,137
| Re: A place to post u'r clod in action!
I'm not sure if anyone has ever seen pics of mine before. The Duke then: Here is a post on it. Come meet "The Duke" The SuperDuke now. Clod Axles Shoe Goo Lockers (thanks Pinchflat and Kaetwo) 8T/9T front/rear pinions Integy Matrix 55 turn motors ClodMod Racing motor mounts Super Rooster ESC Hitec HS5645MG front steering servo Hitec HS5945MG rear steering servo El Diablo aluminum frame with coilover front/ coil spring rear suspension (used to be coil spring all around) High clearance, brass over aluminum lower links/aluminum upper links ThunderTech upper link mounts Traxxas XXL Maxx shocks Imex JumboMaxx Swamp Dawg tires on RPM offset Clawz HeydCo Wheel adapters Last edited by Grizzly4x4; 01-29-2005 at 11:57 PM. |
12-24-2004, 07:03 PM | #8 |
Quarry Creeper Join Date: May 2004 Location: Boobslando, florida
Posts: 323
| Re: A place to post u'r clod in action! Last edited by bulletproofcustoms; 01-22-2006 at 09:32 PM. |
01-01-2005, 02:27 PM | #9 |
Pebble Pounder Join Date: Oct 2004 Location: ny
Posts: 107
| Re: A place to post u'r clod in action!
OUT FOR SOME FUN http://img110.exs.cx/img110/8603/img00396sd.jpg Last edited by Grizzly4x4; 01-29-2005 at 12:33 AM. Reason: Picture was too big |
01-05-2005, 11:36 PM | #10 |
Newbie Join Date: Nov 2004 Location: Hazleton
Posts: 14
| Re: A place to post u'r clod in action! http://www.rcpics.net/img/46361 http://www.rcpics.net/img/46360 dont know how to post a pic so here are my links |
01-29-2005, 12:01 AM | #11 |
PapaGriz Yo Join Date: Apr 2004 Location: In the garage building the wife a crawler
Posts: 13,137
|
Here is my 2.2 Clod. This is how The Duke started out. Clod Axles 11T/10T front/rear pinions stock motors Rooster ESC Hitc Servo Custom welded 1/2" square steel frame (16 ga) Parallel 4 link with tracking bar front suspension, triangulated rear 4 link Frame mounted steering servo TMaxx shocks and Losi springs Masher 2000 tires on Proline Agitator wheels. More info here: Scale 2.2 Clod crawler Last edited by Grizzly4x4; 10-06-2006 at 10:57 AM. |
01-29-2005, 12:23 AM | #12 |
PapaGriz Yo Join Date: Apr 2004 Location: In the garage building the wife a crawler
Posts: 13,137
|
Project ModClod I rebuilt my daughters rig using a stock Clod chassis. I made some link mounting points and braces for the chassis out of aluminum. It werks great, the body sits up high because she doesnt want the fenders hacked out. Clod Axles JB Lockers 9T/10T front/rear pinions Mag Mayhem motors ClodMod Racing motor mounts Super Rooster ESC Hitec HS5945MG steering servo rear steer locked out Modified Stock Clod chassis High clearance, steel over aluminum lower links/ aluminum upper links ThunderTech upper link mounts Integy MSR4 aluminum piggyback shocks Losi LST's on RPM offset Clawz HeydCo Wheel adapters Last edited by Grizzly4x4; 01-29-2005 at 10:51 AM. |
02-03-2005, 07:18 AM | #13 |
RCC Addict Join Date: Apr 2004 Location: Cincinnati Ohio
Posts: 1,673
|
You put together some really nice rigs there grizz. I've used a few of your ideas in my my past 2 builds. Here's my current build. Coil spring setup inspired by Grizz. Clod axles 9t pinons Integy 55t lathe motors Regular Rooster 1600mah RX pack mounted to front upper links 3000mah NIMH 7.2V pack mounted in lower chassis stock tmaxx springs aluminum maxx shocks 18" wheelbase Losi LST tires on tmaxx wheels, custom mounted to clod hubs Traxxas TQ3 radio modded for rear steer Bluebird BMS-630mg front servo (currently fried) Hitec 645 rear servo (broken case) "Mudcow" style servo mounts 3/16" square tube steel frame 26? guage steel skidplates Pics are posted in another thread, so I'll just link them http://www.rccrawler.com/forum/attac...tachmentid=143 http://www.rccrawler.com/forum/attac...tachmentid=144 http://www.rccrawler.com/forum/attac...tachmentid=145 Last edited by AdamF; 02-03-2005 at 07:22 AM. |
02-06-2005, 06:41 PM | #14 |
Pebble Pounder Join Date: Dec 2004 Location: Richmond,VA
Posts: 138
|
Here's my clod in action with a new Jeep body and repainted Dodge body, new moabs and narrowed 40's. Check the bling!
Last edited by kwj48; 02-06-2005 at 06:53 PM. |
02-11-2005, 08:51 PM | #15 |
RCC Addict Join Date: Apr 2004 Location: Cincinnati Ohio
Posts: 1,673
|
My clod with the body mounted. Next step----limiting straps. Too much articulation. This was the moment my front servo fried. :? |
02-12-2005, 03:25 PM | #16 |
I wanna be Dave Join Date: Feb 2004 Location: on a Big Rock
Posts: 7,837
| RocLobster Clod Axles Integy Lathe Motors 8 t Pinions Super Rooster ESC Hitec Servos TQ3 Radio System Last edited by Fishmaxx; 02-12-2005 at 03:35 PM. |
02-12-2005, 05:02 PM | #17 |
Rock Stacker Join Date: Jan 2005 Location: No Fawk virgina
Posts: 87
|
changes since pics, hitec servo, widner kit, 9tooth f/r , hot glue locked dif, lowered the links to parallel.............
|
02-20-2005, 11:33 PM | #19 |
Quarry Creeper Join Date: Jan 2005 Location: In the Garage!
Posts: 257
|
Well here is my clod i have coming. will be here Wed. Won't be much to do to it. But i will definitely do a few more mods to make it my own. Here is what it has right now. * Gecko First Gen chassis * Additional G2 upper plate on the rear end of the truck * New RCGUY LWB 5/16 links * Links mounted to top of axles (LOA link over axle) * 2 six cell 1500mah batteries by Dynamite * Novak Super Rooster (custom black edition by me) with Fan cooling and blacked out wiring harnesses * External 6v receiver pack for radio and servos * 2 Hitec servos (645mg's) * 12 gauge black wiring all around * Remote Axle Disconnect (via R/C) * Jeep body (either the CJ or the Rubi, currently a black Rubi) * Losi LST tires on Proline Wheels (no foams) * TTR Maxx wheel adapters for clodbuster * CLODMODRACING adjustable motor mounts * Robinson Gear 9th pinions * RC4wd TracGear I in both axles (locked) * RCGUY steering kit modded and mounted to the axle brace * Kimbrough 124 Black Gas servo savers (currently running aluminum arms) * TRX HD XL aluminum shocks and caps * Full ball bearings in each axle * Integy 55t x1 Lathe motors on each axle |
02-22-2005, 07:53 PM | #20 |
Rock Stacker Join Date: Jul 2004 Location: Texas, San Angelo
Posts: 87
|
Here is HOSS 2. [img=http://img228.exs.cx/img228/7884/newhoss12rq.th.jpg] [img=http://img228.exs.cx/img228/6766/newhoss54bl.th.jpg] New and improved chassis. |
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/tamiya-clod-buster/1878-rock-clod-gallery-place-post-ur-clod-action.html | ||||
Posted By | For | Type | Date | |
RC-TRIAL.PL :: Zobacz temat - nacieszcie oczęta :D | This thread | Refback | 02-19-2013 09:33 AM |
| |