Stick Super & 2.2 Clods 4 Attachment(s) Just a couple pics of my Stick Super, 1/4 scale servos, 55t motors, 6 & 8 tooth pinions, two Tekin Rebels Blah Blah Blah. It's a real stick with heim joints & everything too. The 2.2 is my Boys, it's a beast. Pretty much indestructible and he's happy with it. They both have TTR CVDs in both axles. The Green/Black Monster theme for the paint on both was his idea. |
Nice dude, but gotta post some naked shots too.... without the bodies that is.:mrgreen: I'm more interested in 2.2 clod right now. |
Yes I am interested in the 2.2 clod to please post pic. with out bodies. |
Added Naked Pics 9 Attachment(s) Here are some pics with no bodies. The 2.2 has had no mods made since the pics with the 2.2 Chisels on it other than it's winter shoes and the brush guard. 55t's, 9-8t pinions, Maxx metal shocks, alum tubes/knuckles. The maxx wheels are narrowed to 1-1/4" wide. All metal drive gears and CVD's on both ends. It's a CPE EVO chassis chopped down with no skid plate. WB is 13" This was actually my first crawler back about 4 years ago. It's been upgraded many times and the rear gear housing actually wore through and had to be replaced. The brush guard helps when it plows off the tops of snow banks down to the street, saves the body. The 2.2 truck is not pretty but I guarantee it will embarris some comps machines with no problems. The stick super has a 4 Channel Hitec radio, independant steering Hitec 805 1/4 scale servos, on both ends and seperate Tekin Rebels for either axle. TCS chassis main tube broke a few years ago, replaced with aluminum tube with all other TCS parts retained. [search: project xerox ]Home made servo mounts, skid plates, battery mounts, PVC rear motor guard etc. WB is 17-1/2" I love this crawler and was bummed when to Super's were falling off in popularity, but, I'll keep mine, it's unstoppable, and will be getting some new Plowboys to upgrade it's shoe this winter. On to the pics. [that I can take better of if you need] Oh Yea, My fleet at the end, the 1.9 Super Duty is a build thread in 1.9 Crawlers |
Thank You lot's of help.!!!!! |
No skid? Any hang up issues? |
No not really. The sides of the plates are all that hangs down, and being a clod axled rig the motors take most of it. |
This is my favorite SUPER!!! "thumbsup" |
Could you post up a pic of yer 1/4 scale servo plates? |
All times are GMT -6. The time now is 05:27 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com