01-28-2011, 09:54 PM | #1 |
Newbie Join Date: Jan 2011 Location: hooversville
Posts: 3
| clod wheels
ok guys just got first clod doing a rebuild ..need to know what wheel can i use on it ..i have a old usa-1 will the wheel work on the clod ...if the do i can make mods to the apter to make the work ...have access to a full machine shop... Last edited by weemanclod; 01-28-2011 at 10:22 PM. |
Sponsored Links | |
01-29-2011, 12:40 AM | #2 |
Quarry Creeper Join Date: May 2004 Location: SW of Chicago
Posts: 212
|
The Clod & USA-1 wheels are the same size so the tires are interchangable. The USA-1 wheel uses a 19mm hex and the Clod wheels have a 5 pin drive adapter that goes to a 12mm hex. With a 12-19mm hex adapter the USA-1 wheels will fit the Clod.
|
01-29-2011, 10:59 AM | #3 |
Newbie Join Date: Jan 2011 Location: hooversville
Posts: 3
|
k thanks if there is anthing else you guys can tell me that would help ..thanks for the info. where can i get the adapter at online?
Last edited by weemanclod; 01-29-2011 at 11:09 AM. |
01-30-2011, 11:13 AM | #4 |
RCC Addict Join Date: Sep 2007 Location: Hallsville, Tx
Posts: 1,820
|
You can run some 2.2 axial offset wheels or traxxas stampede/rustler wheels and you can run 2.2 tires. I am putting a 14mm adaptor hex on my clod so i can run associated mgt2 wheels and tires on mine. the tires are taller that clods and the wheels are a little taller and narrower so there is more room between the suspension and tires unlike with clod wheels/tires.
|
Thread Tools | |
Display Modes | |
| |