RCCrawler Forums

Double J · 04-12-2006, 09:08 AM

Have you ran into any problem with the chassis as you have been running it.
I figured if Destroyer hasn't destroyed it then thats a good sign.

raytard · 04-15-2006, 02:14 PM

Quote:

Originally Posted by SVEN

I'm sure he could have placed very well in the final course. Especially since his rig was one of the few who could manuever the first gate of the last course with ease.

While setting up the final course, we used Destroyers "VS" for testing & he made every obstical look fairly easy...

The first 2 pics, are the first 2 gates... Hard left!
The next 4 pics, is what happened to, "most".

(Sorry for that JIA)

dezfan · 04-15-2006, 07:59 PM

Ooops. Not getting far in 3 wheel drive!

Double J · 04-15-2006, 11:46 PM

And the sturdy but stuborn VERTICAL SMILE based chassis pulled it off with ease? or aparent ease?

HMMMMMMMMM Sounds like a good Chassis to me

Better go get one while you can

.

Double J · 04-15-2006, 11:52 PM

Just mess-n I love the pics of carnage.

Destroyer · 04-16-2006, 07:16 AM

That first gate was pretty tricky. I set the truck up so the it was at an angle through gate 1, and then just walked up the ledge and through 2 on a diagonal. Stability was key.

No problems to report of the chassis yet...It's holding up well, especially considering my driving style and not-so-light truck.

-Destroyer

taco crawler · 04-20-2006, 03:18 PM

thats a sweet looking rig. the vid was great too. i like the body on that truck,, fits it nicely.

Destroyer · 04-26-2006, 08:04 AM

Thanks man!

I'm making a new video...hope to have it done this weekend. Should be a bit better than the last one- it was only for testing/evaluation purposes.
-Destroyer

raytard · 05-03-2006, 12:13 AM

From the Buford Dam Buster II Comp:

Here is a vid that cuts out after ~2 minutes. (sorry if I'm stepping on any toes!)

It shows this sequence of pics at least...

http://www.rcpics.net/img/75821

Alot of people had trouble w/ gate #2.

My N.N. went up it, w/ the same ease... Then, I decided I needed 40 pts. real quick...

Double J · 05-03-2006, 07:59 AM

Nice little vid there. looks like some good driving to get through the gate.

05-03-2006, 12:13 AM	#29
raytard RCC Addict Join Date: Sep 2005 Location: ...Here & There Posts: 1,590	Edited... Now, w/ correct Link. From the Buford Dam Buster II Comp: Here is a vid that cuts out after ~2 minutes. (sorry if I'm stepping on any toes!) It shows this sequence of pics at least... http://www.rcpics.net/img/75821 Alot of people had trouble w/ gate #2. My N.N. went up it, w/ the same ease... Then, I decided I needed 40 pts. real quick... Last edited by raytard; 05-03-2006 at 11:31 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-12-2006, 09:08 AM	#21
Double J I wanna be Dave Join Date: Dec 2005 Location: between heaven and hell. Posts: 3,367	Have you ran into any problem with the chassis as you have been running it. I figured if Destroyer hasn't destroyed it then thats a good sign.

04-15-2006, 07:59 PM	#23
dezfan I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK. Posts: 12,563	Ooops. Not getting far in 3 wheel drive!

04-15-2006, 11:46 PM	#24
Double J I wanna be Dave Join Date: Dec 2005 Location: between heaven and hell. Posts: 3,367	And the sturdy but stuborn VERTICAL SMILE based chassis pulled it off with ease? or aparent ease? HMMMMMMMMM Sounds like a good Chassis to me Better go get one while you can .

04-15-2006, 11:52 PM	#25
Double J I wanna be Dave Join Date: Dec 2005 Location: between heaven and hell. Posts: 3,367	Just mess-n I love the pics of carnage.

04-16-2006, 07:16 AM	#26
Destroyer Rock Crawler Join Date: Apr 2004 Location: North GA Posts: 824	That first gate was pretty tricky. I set the truck up so the it was at an angle through gate 1, and then just walked up the ledge and through 2 on a diagonal. Stability was key. No problems to report of the chassis yet...It's holding up well, especially considering my driving style and not-so-light truck. -Destroyer

04-20-2006, 03:18 PM	#27
taco crawler Newbie Join Date: Apr 2006 Location: charleston Posts: 36	thats a sweet looking rig. the vid was great too. i like the body on that truck,, fits it nicely.

04-26-2006, 08:04 AM	#28
Destroyer Rock Crawler Join Date: Apr 2004 Location: North GA Posts: 824	Thanks man! I'm making a new video...hope to have it done this weekend. Should be a bit better than the last one- it was only for testing/evaluation purposes. -Destroyer

05-03-2006, 07:59 AM	#30
Double J I wanna be Dave Join Date: Dec 2005 Location: between heaven and hell. Posts: 3,367	Nice little vid there. looks like some good driving to get through the gate.

Sponsored Links

RCCrawler Forums

Thread: Vertical Smile-Clod Style