4 link help
 

i've tried looking at pics on here but it kinda over my head. how do you mount your 4 link to the stock plastic axles. i'm going to scratch build a chassis, and my 4link rods. any help or pics will be nice, not new at the hobby just new at this scratch build thing. oh there clod everthing, stock chassis:)

You can bolt your lower links to the inside top of the axle tubes with a bolt and nut. There are many different vendors that sell the upper link mount that will fit where the original steering bellcrank used to be. Hope this helps..

thanks creeper

u can also drill holes in bottom and mount like this.

http://i11.photobucket.com/albums/a1...4/faf726b7.jpg

thanks alot for the info:)

http://i11.photobucket.com/albums/a1...4/faf726b7.jpg[/QUOTE]

Best way of using 4 links is to triangulate it by using upper link mounts like this picture on post # 8...

http://www.rccrawler.com/forum/showt...per+link+mount

from

http://rcpcrawlers.com/product.php?p...9&cat=8&page=1

thanks alot for all the help guys