04-24-2011, 11:06 AM | #1 |
Newbie Join Date: Apr 2011 Location: reidsville
Posts: 4
| 4 link help
i've tried looking at pics on here but it kinda over my head. how do you mount your 4 link to the stock plastic axles. i'm going to scratch build a chassis, and my 4link rods. any help or pics will be nice, not new at the hobby just new at this scratch build thing. oh there clod everthing, stock chassis |
Sponsored Links | |
04-24-2011, 10:26 PM | #2 |
Newbie Join Date: Dec 2009 Location: Santee
Posts: 33
|
You can bolt your lower links to the inside top of the axle tubes with a bolt and nut. There are many different vendors that sell the upper link mount that will fit where the original steering bellcrank used to be. Hope this helps..
|
04-25-2011, 05:43 AM | #3 |
Newbie Join Date: Apr 2011 Location: reidsville
Posts: 4
| |
04-25-2011, 08:12 PM | #4 |
Newbie Join Date: Dec 2005 Location: crystal city
Posts: 6
|
u can also drill holes in bottom and mount like this. |
04-26-2011, 08:45 PM | #5 |
Newbie Join Date: Apr 2011 Location: reidsville
Posts: 4
|
thanks alot for the info [/QUOTE] |
04-27-2011, 07:00 PM | #6 |
Rock Crawler Join Date: Jan 2007 Location: Viroqua
Posts: 940
|
Best way of using 4 links is to triangulate it by using upper link mounts like this picture on post # 8... 4 links on otherwise stock clod from http://rcpcrawlers.com/product.php?p...9&cat=8&page=1 |
04-27-2011, 07:15 PM | #7 |
Newbie Join Date: Apr 2011 Location: reidsville
Posts: 4
|
thanks alot for all the help guys
|
Thread Tools | |
Display Modes | |
| |