Vintage Clodzilla w/operable snow plow
 

Dug out my '93 vintage Clodzilla and made a few chassis and suspension mods. Still running the original Sapphire 17 T motors with a Novak Super Duty esc. and 4 wheel steering. I recently made the operable snow plow. Still need to paint the VW bug body.
Clod Operable Snow Plow - YouTube

Re: Vintage Clodzilla w/operable snow plow
 

Thats pretty damn cool Gumba, post some pics of your plow setup. Welcome to the board BTW.

Re: Vintage Clodzilla w/operable snow plow
 

Here ya go. The front servo mount holds 2 servos, one for the steering and one for the platform lift. I used 2 Kyosho Blizzard blades to make one 16" wide one held in place with an aluminum frame. The servos are from Crawford. [IMG]http://http://there.dino.com/harold/...t/bugplow2.jpg[/IMG] The wheels have 5/8" spacers for more steering clearance.http://there.dino.com/harold/photobucket/bugplow1.jpg

Re: Vintage Clodzilla w/operable snow plow
 

Badass stuff! I love vintage Clods. I've had two of them over the years (an original, and a super Clod), and I really miss them both!

Re: Vintage Clodzilla w/operable snow plow
 

Here's a shot of the Clod. Some of the mods include removing the 4 lower links and a couple of the vertical links, and switching to a 4 mount upper link system. Also made a new center section. The servos are mounted next to trans. The servo mounts can hold 2 servos and are tied into the center upper link post. The inner servo is for the steering, the outer servo on the front is for lifting the snow blade. A second servo can be mounted on the rear servo mount for some type of tow truck crane. The rear servo mount has a 3 mm threaded hole so you can lock out the rear steering and not remove the servo. The wheels have 15mm spacers for more turning clearance.
The next project in progress is a track system that retains the 4 wheel steering.
http://there.dino.com/harold/photobucket/bugplow2.jpg

Re: Vintage Clodzilla w/operable snow plow
 

really nice, a clodzilla 1! Cool stuff dude!

Re: Vintage Clodzilla w/operable snow plow
 

Thought I'd up date this. I switched to Integy 55T motors w/9T pinion, differential lockouts, Holmes esc, Gmade shocks, Hot Racing steering blocks. I made a set of 3.8" aluminum wheels so I could use the paddle tires for more traction, and finally painted the body. http://tinyurl.com/bfenr9g

Re: Vintage Clodzilla w/operable snow plow
 

looks great! Those wheels are awesome! Any closeup pictures of the wheels?

Re: Vintage Clodzilla w/operable snow plow