Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Superclass Crawlers > Tamiya Clod Buster
Loading

Notices

Thread: Gear box specs and measurements for the Super Clod

Reply
 
LinkBack Thread Tools Display Modes
Old 03-16-2012, 02:16 PM   #1
I joined the Band!
 
Join Date: Feb 2012
Location: bay area
Posts: 66
Default Gear box specs and measurements for the Super Clod

I'm looking to make a hybrid axle based on the super clod gears. I'm looking to graft them into an Integy IROCK 1/8 gear housing on an Exceed Maxstone 1/8 axle.
So far I have functioning axles with stock plastic gears in the alloy Integy IROCK gear box mated to Exceed Maxstone axle tubes and axle shafts With Integy IROCK alloy knuckles and inner C's.
I have been on the hunt for alloy gears to add longevity to the axles. So far in my research I have found that the IROCK alloy gears have been on backorder and the Super Clod has available alloy gears.
In a online comparison both axles share gears of the same tooth count (15t on 50t) but I am unsure if the pitch is the same. My current setup has 32 pitch gears and If the Super clod is also 32 pitch I can turn them on a lathe and adapt them.
Can anyone confirm the specs on the super clod gears?
Thanks in advance!
-707
707offroad is offline   Reply With Quote
Sponsored Links
Old 03-26-2012, 04:34 PM   #2
I joined the Band!
 
Join Date: Feb 2012
Location: bay area
Posts: 66
Default Re: Gear box specs and measurements for the Super Clod

Anybody? I'm sure somebody has a clod axle apart that knows what the pitch and tooth counts are.
707offroad is offline   Reply With Quote
Old 03-27-2012, 01:12 AM   #3
Quarry Creeper
 
Join Date: Dec 2009
Location: in front of you...
Posts: 248
Default Re: Gear box specs and measurements for the Super Clod

32p...
nosyajg is offline   Reply With Quote
Old 03-27-2012, 10:37 AM   #4
I joined the Band!
 
Join Date: Feb 2012
Location: bay area
Posts: 66
Default Re: Gear box specs and measurements for the Super Clod

Thanks man!
707offroad is offline   Reply With Quote
Old 03-29-2012, 09:27 PM   #5
Quarry Creeper
 
Join Date: May 2004
Location: SW of Chicago
Posts: 212
Default Re: Gear box specs and measurements for the Super Clod

Only the final gear that the motor drives is 32P. It is a 50T
The rest of the gears are metric Mod1. Off the 50T is a 15T that drives a 44T with another 15T that feeds the dif/spool of 40T.

50/P x 44/15 x 40/15
ThunderVP is offline   Reply With Quote
Reply



Gear box specs and measurements for the Super Clod - Similar Threads
Thread Thread Starter Forum Replies Last Post
Bad Mesh on bevel gear and diff gear out of the box? Elliott000 Axial SCX-10 3 08-19-2011 06:37 PM
Box Measurements canadianlimited Electronics 4 12-29-2009 08:20 AM
metal gear for txt-1 centre gear box??? satin's truck Tamiya Txt-1 and Juggernaut 12 11-12-2006 11:59 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 02:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com