First Stick Chassis Build...in Honduras

[dezfan]

Originally Posted by johnrobholmes

Dang, you and Cubman seem to be having all kinds of troubles getting them to work right! I have never had a problem!!


Hopefully it wont be like the time that Dez was having problems with his and I walked up and programmed it in about 7 seconds

Naaaaaaaaaaaaa, it could never be that easy!

[cartronicshn]

So it's settled according to Dez , and i take his word seriously the PIMP CANE oficial name is HUGGY BEAR like the starsky and hutch series PIMP

[dezfan]

Originally Posted by cartronicshn

So it's settled according to Dez , and i take his word seriously the PIMP CANE oficial name is HUGGY BEAR like the starsky and hutch series PIMP

PIMPING!

[cartronicshn]

Got my mambas working , no pics yet , will fix all my wiring and take a vid later, all i can say is wow , these motors are unstopable, they are relentless, either you go over the obstacle, melt your tires or destroy your diff gears, i love them

[cartronicshn]

My mambas test, the rig isn't completed, need to do the wiring and mounts for the electronics also the body mounts , they will get done sometime .and now the video clips

http://s66.photobucket.com/albums/h2...nt=STICKBL.flv

http://s66.photobucket.com/albums/h2...ent=blpimp.flv

[dezfan]

Cool Carlos, now mount some Moab XL's on it, get a body and let's crawl.

Duel ESC's right, Did you use a Y connector or how did you connect them?

[cartronicshn]

hey dez, dual mambas with y harness, those gmade tires aren't that great i had trouble before jut going up that rockpile with them on lathes so that's why i took my mashers just in case, but with all the power on these outrunner pups there was no need , i actually got into a bind and the motors never let up it actually twisted the HUGGY BEAR so much it sprung into the air 10-12" wow, i still can't believe it they have that much power, i will take it to the rocks on the weekend and take some vid

[dezfan]

Yeah, I'm hoping Santa brings me a couple BL setups for the Corporal!

HO HO HO Biotchs!

[Unholy]

Originally Posted by cartronicshn

... i actually got into a bind and the motors never let up it actually twisted the HUGGY BEAR so much it sprung into the air 10-12" wow...

Hmmm... if you could harness and control that for Comps... *BOING* I cleared that ledge with ease!

[cartronicshn]

lol unholy, it was funny/scary, to see it land on it's back. It actually flipped in the air wish i would have caught that on film, but i didn't have a cameramen , kinda hard to drive and hold the camera at the same time

[syco133]

You will soon be able to harness that power just drive it a little more and you will know when you can and cant do it. I have done it in 2 comps so far it gets you out of tight spots thats for sure. and both times it put me right where I needed to be it helped me win our last comp I was the only person to finish the final with a negative score.

[clodstall]

sounds cooooooooool. need to get that on vid. probably will never happen again.

[cartronicshn]

i brought my PIMP CANE aka as HUGGY BEAR , to gtg and it was awesome, total domination and the brushless set up was awesome

[cartronicshn]

Me and a couple of friends went out to check out a new crawlin spot, so i took my PIMP CANE aka HUGGY BEAR , annd my friend took his CPE EVO, we were also out to test his savage shocks on his rig and a new pack we made at the store trying out 2500mah AA, i must say i was impressed i got around 50 minutes on it's first charge on my stick with 2 of JRH's outrunners and mambas, i'am definetly building some more packs, i loved the battery on the axle deal.

http://s66.photobucket.com/albums/h2...t=MOV02163.flv

[Jo Mama]

how do those motors do underwater??????

[cartronicshn]

Hey jo mama!! catchy name btw, all i can say is running under mud more then water, if you look closely at the video you'll see it mostly mud , and those revolver motors are filled with mud, but they got back home working great, not so lucky with my rear steering servo , after i just took some electronics spray cleaner and washed it down, and they work perfectly still.

[Jo Mama]

Originally Posted by cartronicshn

Hey jo mama!! catchy name btw, all i can say is running under mud more then water, if you look closely at the video you'll see it mostly mud , and those revolver motors are filled with mud, but they got back home working great, not so lucky with my rear steering servo , after i just took some electronics spray cleaner and washed it down, and they work perfectly still.

lol thanks...... wow i would think they wouldnt do so good but the vid proves it... do u think i could do some good mudding with those?? how much are they?

[cartronicshn]

Get in contact with JRH , HOLMES HOBBIES used to carry these outrunners, now they have even more powerful motors, check out the vendors section.

[cartronicshn]

Back from the dead , had gtg on sunday took some pics, and had a chance to take my Pimp Cane aka "huggy Bear" along with my Claw super my 14" wb XRC tlt and a Touareg along for the ride, as usual Huggy Bear did awesome, cleared all the obstacles with ease along with one that no else could clear, didn't get any video as we were taking turns driving and shooting the vid , and no one wanted to shoot vid because evryone wanted to drive ,so next time we will take a designated cameraman.

[dezfan]

Nice collection Carlos!

Those tires and wheels look familiar.