6x6
 

I have a clodbuster 6x6 and i want to run 3 esc one for each axle and i want to run one battrey can you do it and how would you wire it up?:cry:

Re: 6x6
 

Hi i run 3 17t motors with one evx and 16.8v never a problem, i think running 3esc`s wounld invite extra problems with out much to gain

Re: 6x6
 

I think runing 3 esc one for each axle would be real cool no clod stall.

Re: 6x6
 

And can you post pic here?

Re: 6x6
 

you will still get clod stall with 3 escs.... it will actually be worse because you will have a delay between each esc... i run 2 esc on my race clod and still have clod stall... no way to truly fix it... just learn to live with it

Re: 6x6
 

I have an 8x8, and i run 4 esc's off 2 batteries, and clod stall is almost gone, all you do is hook all the battery leads together (all red together, all black together) up to one plug, and for the reciever you can either use 2 y harnesses or splice all the leads together, so you end up with one plug. You will however have to disconnect the power wire (red) from two of the esc leads, so only one is supplying power to the rx. Have fun!