|
| LinkBack | Thread Tools | Display Modes |
10-20-2014, 11:42 AM | #1 |
Rock Stacker Join Date: Mar 2011 Location: Richardson
Posts: 86
| All aluminum Clodzilla 2 built for crawling
I've been working on this clodzilla 2 for quite some time now trying to improve it in every way possible from driveablility to crawling capabilities and have started modding it even further. Now the truck is almost all aluminum but the main goal is to get rid of any weak link while dropping as much weight from up top and lowering the center of gravity. The main problem with the clodbuster is the hardware that likes to loosen up which I've almost completely changed to stainless with Nylocks. I locked the diffs which made a world of difference and lowered the gear ratios by almost 3x lower than stock which helps all 4 spin the same rate on hill climbs and increased the run time a ton. I posted a link to a VIDEO below of it climbing a ledge Mods so far: Clodzilla 2 aluminum chassis Aluminum shocks Traxxas titanium tie rods Traxxas evx2 ESC w/ lipo cut-off Traxxas 2075 front/rear servos Traxxas 2.4 radio 7.4v or 11.1v 2200 lipos Stainless hardware w/Nylocks Axial aluminum steering links Ofna heavy duty servo savers HOT RACING aluminum parts: Axle housings Steering Knuckles Low ratio gears 6t pinions Front and rear diff lockers Converted to direct axle mounted servos to rid any slop and reduce weight Moved lower links over the chassis to increase clearance Removed 4 shocks to increase articulation and reduce weight Most recent mods: 3.8" pro-line trenchers Mounted battery in a more forward and lower position on the front of the axle Moved upper links to the inside of the chassis Stretched wheelbase 3/8" Weighted front knuckles Swapped aluminum body posts for plastic Moved body forward and lowered Trimmed fenders for clearance 12 turn titan motors Next mods: Head lights and LED rock lights Swap out for longer shocks and relocate Here's the truck before the recent mods: Articulation before shock removal: Articulation after: Links mounted under vs link mounted over the chassis: New steering setup: Weight savings: On the trails last weekend: Video of it climbing a straight up ledge: http://vid1214.photobucket.com/album...ps6e2360bb.mp4 |
Sponsored Links | |
11-11-2014, 02:25 PM | #2 |
I wanna be Dave Join Date: Aug 2004 Location: san jose
Posts: 2,061
| Re: All aluminum Clodzilla 2 built for crawling
CLODS RULE Sweet rig clods climb great if set up right great little video.... |
02-01-2015, 07:43 PM | #3 |
Rock Stacker Join Date: Feb 2013 Location: blue springs
Posts: 53
| Re: All aluminum Clodzilla 2 built for crawling
Nice rig!
|
02-03-2015, 02:45 PM | #4 |
Rock Crawler Join Date: Jul 2013 Location: Kansas City
Posts: 760
| Re: All aluminum Clodzilla 2 built for crawling
thats pretty sweet
|
All aluminum Clodzilla 2 built for crawling - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My Axial All aluminum built Crawler | CRAZYD64 | Axial AX-10 Scorpion | 0 | 04-22-2011 02:18 PM |
| |