|
My First Clod Build Yup, I’ve never owned a Clod before, despite drooling over them as a child of the 80’s and then having spent 15 years working for a HTU, when I could have got one with an employee discount. It’ll be 4 years since that job ended next month and with my getting O/T while working from home with my current job, I decided I needed to get one, which ended up being the Black Edition I posted in the purchases thread. Well, now that the bearings are in and I had the chance to pick up better Phillips driver bits for my cordless driver, I got started on it today! I started with the gearboxes and suspension to start since to me, those were the hard parts other than getting a chance to paint the body (went with a couple automotive paints that were put in rattle cans for me8) I just set up shop in a recliner in the living room and watched car shows and a show about abandoned places mysteries show. http://img.photobucket.com/albums/v6...psldvffpsf.jpg http://img.photobucket.com/albums/v6...psayyh4wdw.jpg After looking to see how the axle tubes were attached, I will be doing the 6/32 cap head upgrade or something similar with 3.5mm hardware. http://img.photobucket.com/albums/v6...psn0akivkp.jpg By midnight CST, I had 2 complete bearing equipped gearboxes with shocks assembled and installed as well as the servo linkages http://img.photobucket.com/albums/v6...psr8oqkys9.jpg Next up will be the chassis then the body last.....since it may rain here all damned week and that I can’t do indoors:evil: |
Re: My First Clod Build i dont think the clod will ever go out of style there just way too cool for rc school |
Re: My First Clod Build Quote:
I’ve now got a Black Edition Lunchbox with a bb servo and full bearing set on order too for the next build8) |
Re: My First Clod Build Got the chassis built, the axles attached, then the rolling stock assembled and mounted tonight after dinner! http://img.photobucket.com/albums/v6...ps8oj4qejt.jpg http://img.photobucket.com/albums/v6...psm7jk2wyq.jpg I also took a pic of it with my SCX24 and 4-Tec 2.0 for size comparison purposes! http://img.photobucket.com/albums/v6...psbiiz6sqk.jpg |
Re: My First Clod Build Started the body prep tonight, should be ready for primer, then hopefully paint, this weekend! http://img.photobucket.com/albums/v6...pszzj8kroq.jpg http://img.photobucket.com/albums/v6...pss4wdmirh.jpg http://img.photobucket.com/albums/v6...psadpsphju.jpg http://img.photobucket.com/albums/v6...ps0yn6mvyn.jpg Did a bit more beyond this too, just never took the pics tonight. Got everything for the paint but the clear and I’m planning on using spray bed liner In the bed too, so I’m not as worried about those sink marks in the rollbar stand offs. |
Re: My First Clod Build Well, the Clod and Lunchbox are both now driveable, ordered the AMPro tail light lense pieces for the Clod and side marker, parking light and tail light lense kit for the Lunchbox, so I’m holding off on much more bodywork until those arrive. https://www.instagram.com/p/CBM2svzg...=1q3ky3vryuv84 https://www.instagram.com/p/CBMhnPzA...d=le3e1qpofdui https://www.instagram.com/p/CBKO_Ltj...=1p64oqy1wm3d8 |
Re: My First Clod Build After a few months of procrastination, I got to tinkering with the Clod again and fixed a couple issues I was having with the steering, which was mainly me putting the Hudy servo on without centering it first:roll: https://youtu.be/dU4qDJ0jdz8 https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds And yes, I drove on to of my XJ bodied WK there:ror: https://hosting.photobucket.com/imag...080&fit=bounds |
Re: My First Clod Build Looking good! Lovin the red suspension! [emoji1690] Sent from my iPad using Tapatalk |
Re: My First Clod Build Quote:
|
Re: My First Clod Build Got the lid and my Lunchbox ready for primer, just need a cleanup first. I also imaged to lose the AMPro lens kit for the van, So if I can’t find that, I may need to order a second one........... https://hosting.photobucket.com/imag...y/001(10).HEIC |
Re: My First Clod Build Way to go Joe, i still cant beleive you hadn't owned a clod so far :shock: this trucks are so much fun8) |
| All times are GMT -6. The time now is 10:32 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com