calling evo owners i need some help please
 

ive finally gotten all parts and materials together so i can start building my ride but ive got a few questions about the suspension setup,ineed to know where most people mount there upper and lowwer links to the chassis to set the the best ride height for crawling and to get the most articulation.ive tried to find some good pictures of evo's all set up to crawl but cant seem to find any with out a body on them

no one has one of these ??

My camera's toast, but I've got a 16" evo and the bottom link is all the way to the bottom, the top link is in the third hole up, and the shocks are mounted on the 2nd hole from the top. I had an old pic, you can almost see where the links are mounted and it has more than enough articulation. Hope this helps!

i have one as well. but email brett, hes VERY helpfull. may even have a pic for ya. he'll probly chim in.

hes got alot of pictures of his parts my top links are on the top hole of the top mount the lower links are on the axle stay bolts even with out the con washers mine still flexs fine over 60 degrees is a waste on a crawler

thats where i have mine set at right now but it seems to put the gearboxes at really strange angle ,almost to the point were the suspension needs to be at full droop for them to sit level.i think im explaining this right but i think every one gets what im talking about