RCCrawler Forums - wrong knuckels

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Tamiya Clod Buster (http://www.rccrawler.com/forum/tamiya-clod-buster/)

- - wrong knuckels (http://www.rccrawler.com/forum/tamiya-clod-buster/63957-wrong-knuckels.html)

dannan_w

03-10-2007 10:10 AM

wrong knuckels

i have new alum knuckeles and they dont clear the c-brace on my clod axels. and i dont know what to do....i think i got the incorrect ones i have basicly no steering.

http://i143.photobucket.com/albums/r...w/DSC01101.jpg

http://i143.photobucket.com/albums/r...w/DSC01100.jpg

i broke the stock ones and i had ordered these a while back but now i dont have steering....

666	03-10-2007 10:18 AM

Either start grinding or send them back to RC4WD!

They should make it right for you!

dannan_w

03-10-2007 10:34 AM

thanks for the fast resonse. i e-mailed them well see....thanks alot.

Thorsteenster

03-10-2007 11:00 AM

yeah send them back, the new ones are ground down on the sides for steering clearance. i had the same problem with some i ordered awhile back. i sent them back and got hot racing units.

andrewmp6

03-11-2007 12:03 AM

id send them back only thing i dont like about theres is the arm screws on

FinishLineRC

03-11-2007 07:08 AM

to grind the inside of the knuckle cup is sooooo easy. Or take the time to send back and RC4WD will replace.....or sell them to me cheap since they are flawed :D

dannan_w

03-12-2007 11:04 AM

i am thinking about grinding then i am just talking to RC4WD first to see if they might help. i might just end up grinding....thanks alot for all ur help

chino

03-12-2007 12:20 PM

I ordered a rockbull II chassis from RC4WD as well as t-maxx adaptors/wideners and front and rear steering kits. I got the chassis first. A week later I got the adapters, in about another week I got a steering kit. One of the mounts was machined incorrectly. It took about 5 days to hear an email response. They said they would send me out another kit ASAP. I got one after 4 or 5 more days and it was the wrong kit! I emailed again and waited 3 or 4 more days for another response. I was told a new kit would be sent out and instead I recieved another set of wheel adapters. I just gave up then. I will never do business with RC4WD ever again. Outside of the mismachined part every thing else was made great. It was very precise and all fit perfect but their customer service is just crap. From what I've read on several different boards I am not the only one who has this problem.

dannan_w

03-12-2007 01:02 PM

i am sorry to hear that. they are helpin me good, and i ordered these a long time ago and they still helpin i am happy with every thing

All times are GMT -6. The time now is 10:09 AM.