2.2 "Benny"

[guest]

Hello Rcc,

My 2.2 Clod I call "Benny"



Been working on this for a few weeks, still need lots of work before its RTR.

It's sitting on M2K's right now, I want to get some of those Rock Claws, seem to be a good tire. I've been out of the loop in the rc crawler world for about a year. So theres all kinds of new stuff out there, at least to me.

Spec's

Clod axle's. BTA steering

Home-brew chassis

Hitec servo's, 4ws.

Super Rooster ESC.

wheel's are temp', I plan on doing a custom set of wheels.

Heres are a few more pic's.

[Sinastir]

How did you make your body panels?

[Grizzly4x4]

Welcome, looks like a great rig. But how is it a 2.2 Clod when it has Maxx wheels on it?

I think you will find that the Losi claws are too short to work well on a 2.2 Clod. You won't have any diff clearance.

[run2jeepn]

Originally Posted by Grizzly4x4

Welcome, looks like a great rig. But how is it a 2.2 Clod when it has Maxx wheels on it?

I think you will find that the Losi claws are too short to work well on a 2.2 Clod. You won't have any diff clearance.

Maybe not. With shaving and narrowing the track width as much as possible. They might work well. Or not. I haven't tested it that far yet. Pulling the tires in tighter to the Diff will help on Diff Clearance.

[guest]

Originally Posted by Grizzly4x4

Welcome, looks like a great rig. But how is it a 2.2 Clod when it has Maxx wheels on it?

I think you will find that the Losi claws are too short to work well on a 2.2 Clod. You won't have any diff clearance.

It's 2.2 becuase those are 2.2 mashers, they just look bigger becuase of the wheels.

Your right about the tires, I'm thinking of a different tires, I'm drawing a blank on the name though, I remember them being a bit taller then a masher/ Moab.

[Grizzly4x4]

Originally Posted by run2jeepn

Maybe not. With shaving and narrowing the track width as much as possible. They might work well. Or not. I haven't tested it that far yet. Pulling the tires in tighter to the Diff will help on Diff Clearance.

With your narrow axle parts, then I think they would work great.
At full width, the diffs would hang on everything.

[guest]

Here's the tires I am talking about RockStompers, not the Claws

[guest]

Got some new wheels for her, Much better looking in my opinion. what do you guys think?




Sittin' pretty.

[Neil E]

Good looking rig.

Who's rims are they?

You know 4WS is not legal in 2.2 comp! Instead use the third channel for DIG

[guest]

Thanks,

I made those wheels a while ago, never used them though. They were my first attempt at making some wheels, so its pretty cool to see them on a rig.

good Idea on the rear dig