RCCrawler Forums

joesbruiser · 12-20-2007, 09:03 PM

I have been sitting around with absolutely nothing to do so i decided to build my son a new tuber.
I tore the one he has been running for the last year apart and started bending tubing.
His axles have alum.lockers,55T motor in front with 9tooth pinion,45T motor in rear with 8tooth pinion,805 1/4 scale servos,XTM Thorns with under knuckle batts. and Moab XL's.
I stuck with droop shocks and went with a 19 inch wheelbase.
This is what i ended up with.

Kamikaze · 12-20-2007, 10:58 PM

Sweet!! Joe is back!! It will be nice to have a 3rd place guy again. Looks very Coleworks inspired with that rear end.

joesbruiser · 12-21-2007, 08:23 PM

We will see about 3rd place!!!!!
I guess Cole's lines are rubbing off on me a little.

run2jeepn · 12-21-2007, 09:31 PM

That rear section looks sweet.. Nice work...

samson_simpson · 12-21-2007, 09:39 PM

dirty tires on the counter top

. nice work, thats a good look

raytard · 12-21-2007, 10:37 PM

That'll never work!

Welcome back Joe!

cartronicshn · 12-22-2007, 08:16 AM

Very nice looking tuber, i like the rear end

joesbruiser · 12-22-2007, 12:21 PM

Thanks for the comments.
As far as the dirty tires on the counter top goes it is amazing what you can get away with when the wife is not home!!!!!!!!

After x-mas i am going to put a set of CVD's in it and a new set of cells and this one will be done.I think it will get him through the season OK.

Now if i can just figure out what chassis and wheel combo i am going to run for super!!!!!

I would like to run a TCS stick but even the longest backbone is to short. I do not like the droop setups with twin sticks, it is to hard to keep them from driving the rear end under the chassis when you try to push the rear around.
I do not like conventional shock setup's. And i would like to try something other than a pimp cane.
I just do not know what i am going to do!!!!!!

raytard · 12-22-2007, 01:52 PM

Quote:

Originally Posted by joesbruiser

I do not like conventional shock setup's. And i would like to try something other than a pimp cane.
I just do not know what i am going to do!!!!!!

Try the CPE Claw...

(since you ain't Pimpin' no more)

cartronicshn · 12-22-2007, 03:54 PM

Quote:

Originally Posted by raytard

Try the CPE Claw...

(since you ain't Pimpin' no more)

X2 on the CLAW, that is one awesome chassis

joesbruiser · 12-22-2007, 09:03 PM

The claw is about 2 and 1/2 inches to short.
I like the ground clearence of the pimp cane but would like the chassis to be a little more predictable. That is why i was thinking stick. I think it would be the best of both worlds.
I have been thinking about it some and i think i am going to buy a stick kit and see if i can stretch it some.I dont even care if i have to cut and section the center of the back bone.
If that does not work i will go back to a pimp cane.

We run this tuber today and it works great. It is not as stable in off camber situations as the last chassis but i think i can cure that.

ThinkTank · 12-22-2007, 10:51 PM

Quote:

Originally Posted by joesbruiser

The claw is about 2 and 1/2 inches to short.
I like the ground clearence of the pimp cane but would like the chassis to be a little more predictable. That is why i was thinking stick. I think it would be the best of both worlds.
I have been thinking about it some and i think i am going to buy a stick kit and see if i can stretch it some.I dont even care if i have to cut and section the center of the back bone.
If that does not work i will go back to a pimp cane.

We run this tuber today and it works great. It is not as stable in off camber situations as the last chassis but i think i can cure that.

How about a Droop/Torsion combo like H3RSQ's Mantis?
BTW Nice Tuber.

STANG KILLA SS · 12-23-2007, 08:17 AM

wow that back end swoop is sweet! it would be even more awesome to see that design incorpeated in 1 or 2 other spots in the design to tie it all together and make it your style.

12-20-2007, 09:03 PM	#1
joesbruiser I wanna be Dave Join Date: Nov 2006 Location: spring hill TN Posts: 2,959	Extreme Boredom tuber build I have been sitting around with absolutely nothing to do so i decided to build my son a new tuber. I tore the one he has been running for the last year apart and started bending tubing. His axles have alum.lockers,55T motor in front with 9tooth pinion,45T motor in rear with 8tooth pinion,805 1/4 scale servos,XTM Thorns with under knuckle batts. and Moab XL's. I stuck with droop shocks and went with a 19 inch wheelbase. This is what i ended up with.

12-21-2007, 09:39 PM	#5
samson_simpson Newbie Join Date: Nov 2007 Location: Flagstaff, AZ! Posts: 38	dirty tires on the counter top. nice work, thats a good look

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-20-2007, 10:58 PM	#2
Kamikaze I wanna be Dave Join Date: Oct 2005 Location: Columbia TN Posts: 6,154	Sweet!! Joe is back!! It will be nice to have a 3rd place guy again. Looks very Coleworks inspired with that rear end.

12-21-2007, 08:23 PM	#3
joesbruiser I wanna be Dave Join Date: Nov 2006 Location: spring hill TN Posts: 2,959	We will see about 3rd place!!!!! I guess Cole's lines are rubbing off on me a little.

12-21-2007, 09:31 PM	#4
run2jeepn I wanna be Dave Join Date: Sep 2005 Location: USA Posts: 11,196	That rear section looks sweet.. Nice work...

12-21-2007, 10:37 PM	#6
raytard RCC Addict Join Date: Sep 2005 Location: ...Here & There Posts: 1,590	That'll never work! Welcome back Joe!

12-22-2007, 08:16 AM	#7
cartronicshn I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN Posts: 5,076	Very nice looking tuber, i like the rear end

12-22-2007, 12:21 PM	#8
joesbruiser I wanna be Dave Join Date: Nov 2006 Location: spring hill TN Posts: 2,959	Thanks for the comments. As far as the dirty tires on the counter top goes it is amazing what you can get away with when the wife is not home!!!!!!!! After x-mas i am going to put a set of CVD's in it and a new set of cells and this one will be done.I think it will get him through the season OK. Now if i can just figure out what chassis and wheel combo i am going to run for super!!!!! I would like to run a TCS stick but even the longest backbone is to short. I do not like the droop setups with twin sticks, it is to hard to keep them from driving the rear end under the chassis when you try to push the rear around. I do not like conventional shock setup's. And i would like to try something other than a pimp cane. I just do not know what i am going to do!!!!!!

12-22-2007, 09:03 PM	#11
joesbruiser I wanna be Dave Join Date: Nov 2006 Location: spring hill TN Posts: 2,959	The claw is about 2 and 1/2 inches to short. I like the ground clearence of the pimp cane but would like the chassis to be a little more predictable. That is why i was thinking stick. I think it would be the best of both worlds. I have been thinking about it some and i think i am going to buy a stick kit and see if i can stretch it some.I dont even care if i have to cut and section the center of the back bone. If that does not work i will go back to a pimp cane. We run this tuber today and it works great. It is not as stable in off camber situations as the last chassis but i think i can cure that.

12-23-2007, 08:17 AM	#13
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	wow that back end swoop is sweet! it would be even more awesome to see that design incorpeated in 1 or 2 other spots in the design to tie it all together and make it your style.

Sponsored Links

RCCrawler Forums

Thread: Extreme Boredom tuber build