|
| LinkBack | Thread Tools | Display Modes |
05-05-2009, 07:32 PM | #1 |
Quarry Creeper Join Date: Feb 2009 Location: In my house
Posts: 243
| A little help needed with axles.
I just got a set of CR-01 axles 2nd hand. They look to be in good shape, but the gears feel like hell when you just spin the pinion shaft. I opened them up, I can't see anything wrong or out of place (they look good inside too). Is this normal with these axles? Also, I did not get the outer bearings (the one right behind the pin and hex). Any one know what size that is? Thanks in advance. |
Sponsored Links | |
05-05-2009, 09:24 PM | #2 |
Rock Crawler Join Date: Jan 2008 Location: Eveleth
Posts: 713
|
Make sure the pinion gear is shimmed properly, there should be at least 1 possibly 2 shims part #53587. The outer bearing is a 5x10, part #51239. Those are the part numbers right from the Tamiya manual. Hope this helps you out... Last edited by 1rcmonster; 05-11-2009 at 08:34 PM. Reason: spelling |
05-06-2009, 07:46 AM | #3 |
Quarry Creeper Join Date: Feb 2009 Location: In my house
Posts: 243
|
Thanks man I will check out the shims and make sure they are right.
|
Thread Tools | |
Display Modes | |
| |