Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Tamiya CR-01
Loading

Notices

Thread: Motor T Figure - Land Speed

Reply
 
LinkBack Thread Tools Display Modes
Old 07-17-2015, 07:43 PM   #1
Newbie
 
Join Date: Jul 2015
Location: Sydney Australia
Posts: 41
Default Motor T Figure - Land Speed

In EeePee's CR-01 Thread he posted a chart that showed the RPM/Volt
Revs Per Minute per Volt of Various Turn Motors

As Such.


Originally Posted by EeePee
Holmes Hobbies has a great little chart I can refer to:

Motor speeds (taken from random and averaged sample @ zero timing & 3100rpm):

10t = 6526 rpm/volt
15t = 4317 rpm/volt
17t = 3753 rpm/volt
20t = 3216 rpm/volt
21t = 3082 rpm/volt
23t = 2790 rpm/volt
25t = 2588 rpm/volt
35t = 1565 rpm/volt
45t = 1210 rpm/volt
55t = 987 rpm/volt
65t = 837 rpm/volt

That's Per VOLT so if you use 7.2 Volt then multiply those Figures by 7.2 to get your Motors Total RPM.



I sat and calculated these figures to Actual land speed via the Gearbox Ratio and how many times the wheels actually turn per minute, and then the wheel circumference to get how far that many turns will take you.
Multiplied by 60 to get a figure in speed/hr

This is also assuming that the Diffs don't then provide a different Ratio again.

Bear with me I am Aussie so I use Metric figures

10t = 6526 rpm/volt x 7.2v = 46980rpm
Multiply that by 60 (Minutes) = 2818800 Revs per Hour
Divide the R.P.H by Standard Gearbox Ratio of 40.5 = 69600 Revs per Hour for the actual Wheels.
Wheel Radius including tyres is approx 6 centimeters (cm)
This gives a Wheel Circumference of 37.7cm approx
So Multiply 37.7cm by 69600RPH = 2623920cm/hr
Divide 2623920cm by 100 (100 cm per Meter) = 26239.2 meters/hr
Divide that by 1000 (1000 Meters per Kilometer Km) = 26.2km/hr approx. or 16.3mph for you Imperial guys.


I will do Each of the Motors listed with Kmh and Mph figures.

All are approx. rounded to nearest percentage figure

10t = 6526 rpm/volt = 26.2Kmh - 16.3Mph
15t = 4317 rpm/volt = 17.3Kmh - 10.7Mph
17t = 3753 rpm/volt = 15.1Kmh - 9.4Mph
20t = 3216 rpm/volt = 12.9Kmh - 8Mph
21t = 3082 rpm/volt = 12.4Kmh - 7.7Mph
23t = 2790 rpm/volt = 11.2Kmh - 6.9Mph
25t = 2588 rpm/volt = 10.4Kmh - 6.5Mph
35t = 1565 rpm/volt = 6.3Kmh - 3.9Mph
45t = 1210 rpm/volt = 4.9Kmh - 3Mph
55t = 987 rpm/volt = 3.9Kmh - 2.4Mph
65t = 837 rpm/volt = 3.4Kmh - 2.1Mph

Now if you want a Trail Rig like I do and wish to walk along with it then you'd best look at a 55T motor maybe a 45T depending on your walking speed as Average walking speed is apparently approx 5kmh - 3.1Mph

I think I need a Lie down now after that
Green Meanie is offline   Reply With Quote
Sponsored Links
Old 07-27-2015, 12:44 AM   #2
Newbie
 
Join Date: Jul 2015
Location: Sydney Australia
Posts: 41
Default Re: Motor T Figure - Land Speed

Anyone agree or disagree with this.

Hoping I understood the info correctly and made the right calculations
Green Meanie is offline   Reply With Quote
Old 08-13-2015, 07:10 AM   #3
Newbie
 
Join Date: Jul 2015
Location: Sydney Australia
Posts: 41
Default Re: Motor T Figure - Land Speed

LOL



Last edited by Green Meanie; 08-13-2015 at 07:15 AM.
Green Meanie is offline   Reply With Quote
Old 08-13-2015, 12:38 PM   #4
I wanna be Dave
 
Join Date: Sep 2008
Location: PA
Posts: 11,053
Default Re: Motor T Figure - Land Speed

There are very few of us still playing with CR-01s on this site. You'll see a lot of tumbleweeds in this entire section.
JatoTheRipper is online now   Reply With Quote
Old 08-14-2015, 02:46 AM   #5
Newbie
 
Join Date: Jul 2015
Location: Sydney Australia
Posts: 41
Default Re: Motor T Figure - Land Speed

Quote:
Originally Posted by JatoTheRipper View Post
There are very few of us still playing with CR-01s on this site. You'll see a lot of tumbleweeds in this entire section.
Dunno whether to click like or not..................

I acknowledge the humour but it's a shame though
Green Meanie is offline   Reply With Quote
Reply



Motor T Figure - Land Speed - Similar Threads
Thread Thread Starter Forum Replies Last Post
Brushed motor for some speed or waterproof sensored esc/motor. Wehan G-Made Crawlers 13 01-30-2014 08:15 PM
Land Speed Record Fail Hunter711 Chit Chat 2 11-21-2013 01:14 PM
Please help me figure this bec/speed control problem out Steve Hipsley Electronics 10 02-19-2012 04:53 PM
Cant figure it out, brushless motor numbers? Warn Off Road Electronics 3 04-23-2009 02:53 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com