Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Tamiya CR-01


Thread: Heavy Duty Ring and Pinion Diff Gear Options?

LinkBack Thread Tools Display Modes
Old 01-05-2018, 07:15 AM   #1
Pebble Pounder
Join Date: Nov 2013
Location: Bedford, Nova Scotia, Canada
Posts: 113
Question Heavy Duty Ring and Pinion Diff Gear Options?

Hey guys.

I've put a lot of miles on Mogfather, and now it is time for an overhaul.

I've taken apart the tranny and it looks great.

However, when I took the axles apart, the diff pinion gear was quite worn and one tooth was chipped. I am not really upset because the truck has a LOOOT of miles on it. But since I'm doing a full re-build, I figure I'll put in some better parts.

I am going to be putting in the Heavy Duty (HD) driveshaft/locker combo (P/N 5410.

I want to know if there is a HD/hardened steel diff ring and pinion gear set for the CR-01. i.e. is there a HD version of P/N 51326. Doesn't have to be a Tamiya part, but it does have to be good quality.

I did try to search the forum for this but didn't find anything - sorry if someone already posted on this. Any help would be appreciated. Thanks!
GraciousOne is offline   Reply With Quote
Sponsored Links
Old 02-05-2018, 07:49 PM   #2
Oppan Gangnam Style
chino63's Avatar
Join Date: Jun 2005
Location: Shingle Springs
Posts: 5,130
Default Re: Heavy Duty Ring and Pinion Diff Gear Options?

Supposedly the RC4WD T-Rex 60 gears fit the TLT-1axles with minimal work (I've never tied it myself so I can't say for sure). Never had a CR01 so not sure what the difference is from the TLT
chino63 is offline   Reply With Quote
Old 02-05-2018, 08:38 PM   #3
I wanna be Dave
Join Date: Sep 2011
Location: Douglassville, PA
Posts: 2,932
Default Re: Heavy Duty Ring and Pinion Diff Gear Options?

I don't know of any, and I have been looking for years. The stock gears do hold up pretty well and aren't terribly expensive. I'd just swap in another set and call it good.
OSRC is offline   Reply With Quote

Heavy Duty Ring and Pinion Diff Gear Options? - Similar Threads
Thread Thread Starter Forum Replies Last Post
Heavy Duty Beveled Ring-Pinion easleycrawler Axial AX-10 Scorpion 4 04-04-2010 10:19 AM
Diff ring/pinion gear ratio? tetracanth Tamiya TLT Crawlers 2 01-06-2010 01:16 PM
Heavy Duty Ring and Pinion gears... EagleOne Axial AX-10 Scorpion 5 10-29-2007 04:21 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 05:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com