RCCrawler Forums - Noob rebuild tranny help

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Tamiya CR-01 (http://www.rccrawler.com/forum/tamiya-cr-01/)

- - Noob rebuild tranny help (http://www.rccrawler.com/forum/tamiya-cr-01/602925-noob-rebuild-tranny-help.html)

Welderman85

10-13-2018 07:50 PM

Noob rebuild tranny help

Hello all I'm starting to rebuild a new to me cr01. The trans spins fine and the motor spins fine but when I put it all together it is really hard to turn. What did I do wrong or it supposed to be that way

Welderman85

10-13-2018 09:10 PM

Re: Noob rebuild tranny help

It turns fine with out the motor. It was used when I got it all I did was tear it down and clean it up. I should have checked it or ran it before I tore it apart.

OSRC	10-24-2018 06:19 AM

Re: Noob rebuild tranny help

Lots of reduction in that transmission. With the motor in, it will be hard to turn the outputs. Should spin smoothly, just be hard to turn. Kind of the nature of planetary transmissions. Just be sure you've set the gear mesh right. As long as the motor does not get hot when running, you're fine.

All times are GMT -6. The time now is 02:20 AM.