RCCrawler Forums

JeremyH · 04-23-2008, 10:12 AM

Well, if that's the case, then I suppose I can give this product one more chance.

Thanks.

Rockpiledriver · 04-23-2008, 11:24 AM

Quote:

Originally Posted by JeremyH

Well, if that's the case, then I suppose I can give this product one more chance.

Thanks.

We have a few ring gears still just no pinions. Shoot me a PM with your address and I'll send out a replacement.

onebadtj · 07-05-2008, 12:38 PM

Quote:

Originally Posted by JeremyH

Well, I understand stuff will break....my concern was that this part blew out faster than the stock part. I want to know if this was a design flaw and has since been fixed, or if this is just the nature of this product. If the latter, then I'll stick with the stock ring gear.

Well crap! Got my second set installed this weekend (first one failed on the first battery) and I got maybe 1/3 into a fresh pack and it went clicky cliky again. These are in brand new cases and something must be a miss somewhere. Also running Novak bushless Crawler and sticky tires but the factory units seem to last longer. I'm at a loss??? Any Ideas?

DE

Scattman · 07-05-2008, 01:07 PM

I've got a couple on the way so we will see how they hold up for me.

dshelowjr · 07-05-2008, 05:26 PM

I've had mine for A while with no problems with a 3c lipo & A 55 turn

Scattman · 07-05-2008, 05:34 PM

Quote:

Originally Posted by dshelowjr

I've had mine for A while with no problems with a 3c lipo & A 55 turn

Good to know. That's what I'll be running on them.

BILLYGOAT · 07-05-2008, 05:34 PM

I Have Had No Issues With Mine Either. I Run 3c As Well And Not Issues At All.

Stormin2u · 07-05-2008, 06:13 PM

Have you checked lately? I just ordered one for a backup less than two weeks ago.

crash · 12-04-2008, 07:14 PM

I wanted to bump this--give props to RCP--- since I got my replacement part----the rig has not had a single problem

ClodNutz · 12-16-2008, 07:41 PM

Anybody have an idea when they might be back in stock ?- Would love to get my hand on some. (Besides-its almost Christmas-I can get away with spending $$ only around Christmas-well I kinda just cant do it as often)-- -RCP's got great stuff IMO- Thanks

crash · 12-16-2008, 08:44 PM

Quote:

Originally Posted by ClodNutz

Anybody have an idea when they might be back in stock ?- Would love to get my hand on some. (Besides-its almost Christmas-I can get away with spending $$ only around Christmas-well I kinda just cant do it as often)-- -RCP's got great stuff IMO- Thanks

We are all waiting

Sounds like there was a part that needed to be made--but something about waiting for an ok to do it--or something to that nature..

RCP doesn't have any due dates as of yet--patiently waiting (and might have to run a set of stockers in the mean time :-( )

Rockpiledriver · 12-16-2008, 09:46 PM

Quote:

Originally Posted by crashfab

RCP doesn't have any due dates

That's true we don't ever have due dates. We don't want to give our customers false promises. Trust me though, these will be here very soon.

ClodNutz · 01-07-2009, 06:15 PM

In case nobody noticed- (which I doubt if I'm the only one that did) RCP has them back in stock-- Yeah -Thanks RCP- Order already sent

crash · 01-07-2009, 08:05 PM

Quote:

Originally Posted by ClodNutz

In case nobody noticed- (which I doubt if I'm the only one that did) RCP has them back in stock-- Yeah -Thanks RCP- Order already sent

Beat ya--mine are already on there way

keala · 01-08-2009, 12:24 AM

Well guyz,since rcp has been out of stock for a while I got some rc4wd spool lockers and they stripped on me too. Only about 3 packs through.

TurnThePage · 01-30-2009, 01:10 PM

mine seem to be doing weel but damn its so grindy in there i have tried everything to get mesh right and lube parts but its so unsmooth i hate these axles, i need help fixing my problem

Rockpiledriver · 01-30-2009, 01:36 PM

Quote:

Originally Posted by TurnThePage

mine seem to be doing weel but damn its so grindy in there i have tried everything to get mesh right and lube parts but its so unsmooth i hate these axles, i need help fixing my problem

Your problem is likely the axle houosing. We had one that was rough like you describe. We could not figure out why until we changed out the housing. It was nice and smooth after that.

TurnThePage · 01-31-2009, 12:06 PM

yeah that could be i just tore down every thing and my front axle is perfect, i thought it was broke or something, very little resistance, but my rear is pretty grindy but most the noise is from my pede tranny that i took apart cleaned and lubed everything and even sounded worse, so im going to get rid of that and try to get some other tranny in there with maybe a dig, not sure yet though but that tranny needs to go

warriorsimi · 02-17-2009, 10:41 PM

i also have a set of the lockers front and back and front stripped out by just using it in the garage has anybody tried calling rcp i tried 4 times and emailed them but no responce .

12-16-2008, 07:41 PM	#30
ClodNutz Quarry Creeper Join Date: Jul 2006 Location: Huntspatch Posts: 197	RCP ring & pinion's Anybody have an idea when they might be back in stock ?- Would love to get my hand on some. (Besides-its almost Christmas-I can get away with spending $$ only around Christmas-well I kinda just cant do it as often)-- -RCP's got great stuff IMO- Thanks

01-07-2009, 06:15 PM	#33
ClodNutz Quarry Creeper Join Date: Jul 2006 Location: Huntspatch Posts: 197	RCP ring & pinion's In case nobody noticed- (which I doubt if I'm the only one that did) RCP has them back in stock-- Yeah -Thanks RCP- Order already sent

04-23-2008, 10:12 AM	#21
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Well, if that's the case, then I suppose I can give this product one more chance. Thanks.

07-05-2008, 01:07 PM	#24
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	I've got a couple on the way so we will see how they hold up for me.

07-05-2008, 05:26 PM	#25
dshelowjr Quarry Creeper Join Date: Sep 2007 Location: Building a scaler!! Posts: 313	I've had mine for A while with no problems with a 3c lipo & A 55 turn

07-05-2008, 05:34 PM	#27
BILLYGOAT RCC Addict Join Date: Apr 2007 Location: RAMBLIN Posts: 1,713	I Have Had No Issues With Mine Either. I Run 3c As Well And Not Issues At All.

07-05-2008, 06:13 PM	#28
Stormin2u I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew. Posts: 7,843	Have you checked lately? I just ordered one for a backup less than two weeks ago.

12-04-2008, 07:14 PM	#29
crash I wanna be Dave Join Date: Dec 2005 Location: Gold Bar Posts: 2,832	I wanted to bump this--give props to RCP--- since I got my replacement part----the rig has not had a single problem

01-08-2009, 12:24 AM	#35
keala Quarry Creeper Join Date: Nov 2007 Location: nanakuli Posts: 301	Well guyz,since rcp has been out of stock for a while I got some rc4wd spool lockers and they stripped on me too. Only about 3 packs through.

01-30-2009, 01:10 PM	#36
TurnThePage Newbie Join Date: Jan 2008 Location: Waynesville, OH Posts: 32	mine seem to be doing weel but damn its so grindy in there i have tried everything to get mesh right and lube parts but its so unsmooth i hate these axles, i need help fixing my problem

01-31-2009, 12:06 PM	#38
TurnThePage Newbie Join Date: Jan 2008 Location: Waynesville, OH Posts: 32	yeah that could be i just tore down every thing and my front axle is perfect, i thought it was broke or something, very little resistance, but my rear is pretty grindy but most the noise is from my pede tranny that i took apart cleaned and lubed everything and even sounded worse, so im going to get rid of that and try to get some other tranny in there with maybe a dig, not sure yet though but that tranny needs to go

02-17-2009, 10:41 PM	#39
warriorsimi RCC Addict Join Date: Jan 2007 Location: caldwell,idaho Posts: 1,309	i also have a set of the lockers front and back and front stripped out by just using it in the garage has anybody tried calling rcp i tried 4 times and emailed them but no responce .

Sponsored Links

RCCrawler Forums

Thread: RCP Crawlers copper alloy locker failure