Widener Comparison Chart
 

I hope you guys find this usefull. When I was first looking for wideners I wish I had something like this for referance :)

http://www.photoshopist.com/Images/r...ks/widener.jpg

I used photoshop to line up all the axles and make them all the same size so its pretty accurate.

If you have other wideners on your TLT axles please send me a pics similar to those above and I can add to it!!

Thanks!
Brandon :)

EDIT: Posted this in the sticky TECH thread, but I would like to keep this one also for any comments.

That's pretty good. You want me to get you a pic of my Blackfoot stub axle equipped axle?

Ya that would be great!

Here is my email for the pics: brandon@photoshopist.com

the axle with the inet wideners-
what are those braces by the ends? looks very interesting!

Pic on the way!

Inet isn't planning on making their wideners for quite some time, I guess they're really low on their priority list.

I ended up purchasing a set of the Tobee Craft 32mm ones off ebay, should be getting them soon. If interested, I'll snap a photo once I get them on.

those are axle braces.. i forget who makes them

Please do, that would be great! I have to say that the Tobee crafts are much nicer than the Inets in my opinion, you wont be dissapointed with those!!

They are made by PRP they are excellent for strengthening the axles, but sorta get in the way when crawling so I use them on my basher/sand truck :)

Blackfoot axles added. Thanks Frito! Looks like they are just shy of the 16mm tobee craft's but the threads are much longer which would be great for the stampede wheels.

Thanks again.

I don't think the Blackfoot threads are any wider than stock. They just look that way because I didn't have the hexes on there. I have my three piece wheels so I only use the pins and didn't think to put the hexes on for the pic. :(

Hmm ya it probably just looked that way bc there are no hexes like you said.

Has anybody tried the wideners by Gmade?? Check them out http://gmade.net/skin/gmade/goods/pr...e=030000012286

How wide does that make your tlt, at the moment mine is 10 inches wide but i would like to get some extra

Well the tobee crafts widen the truck by 16mm & 24mm as pictured. So 10 inchs plus that, if you go with the inets it will be even more, probably around 11 1/4"

Just added the tobee craft 32mm wideners! Thanks Joe Mauma

how about this?
 

http://gmade.net/main_image/prddesc_img/wide1.jpg
http://gmade.net/main_image/prddesc_img/wide2.jpg
http://gmade.net/main_image/prddesc_img/wide.jpg
http://gmade.net/main_image/prddesc_img/wide6.jpg

G-made 2.2" widnwner is open..

I almost bought a set of those, has anybody tried them?? They are cheaper than the inet ones, $27 I think...

i..used
 

G-made widner is 2" wider than in normal..

i fill up satisfaction...

but one modify,,,


5mm With it widens the hole of the wheel and must give.

Hmm I thought it was only 1" wider total, not each side. But I may be wrong. And I think that if you have 2.2" tires and wheels you might not have to make the whole bigger. Somebody needs to try them!!

oh...you miss one thing,,
 

i have 2.2" tire and wheels..

i used All-T 2,2" & ofna pirate wheels...

http://gmade.net/main_image/prddesc_img/wide1.jpg

this widner is new fixed bolt..

This bolt diameter is 5mm..


TLT normal axle shaft is only 4mm..


do you understand?,,

if not sure .....

and question me..

um..

i have a mistake..

1" widen than normal,....not 2"

have a nice. day,,

Im pretty the axle braces are PRP.