RCCrawler Forums

rmdesignworks · 11-08-2009, 01:40 AM

Hey Patric,,Thanks,,I'm not sure of the model or brand on the tuber itself,,,I got it in a trade with 1badxj,,,It's his fault I'm now a junky,,I do have more pics and I can take some close ups later in the A.M. when the sun comes up. any thing inparticular you wanna see?

rmdesignworks · 11-09-2009, 12:04 AM

front servo,battery,,esc truss,,,3 point mount

rear truss....7 point mount

6061 T6 aluminum,,TLT uppers,,M3 hardware

rmdesignworks · 11-09-2009, 07:48 PM

oh yeah,,i got my delrin lnks from Shon tonight,,Thanks Shon,,very nice pieces,,,cant wait to get em hooked up,,or at the very least mocked up,,pics as soon as i get something done

R2j · 11-09-2009, 09:31 PM

Your welcome! Your not done yet?

rmdesignworks · 11-10-2009, 07:25 PM

well shon did a great job on the links but i have to trim them down a bit,,,i gave him long numbers to make sure i could get it right where i wanted it,,and im gonna relocate the rear uppers on the truss,,spread em out a little...pics tomorrow

rmdesignworks · 11-10-2009, 10:55 PM

well ya'll know how it is,,i couldnt wait til tomorrow to mock it up or take some pics,,,so are a few of how it sits,,steering link geometry etc,,without the skins and one with the skins,,im still working on the electronics placement,,,heres the pics

Twisted Links · 11-12-2009, 02:57 PM

Sweet Rig! I love the machine work for the diff pieces. I think it's called a truss? Just like full scale.

rmdesignworks · 11-12-2009, 03:13 PM

youre right they are called trusses,,the front is a 3 point servo mount truss and the rear is a 7 point truss

rmdesignworks · 11-12-2009, 10:36 PM

still have a couple things to button up but she's done for the most part

need some slight link length adjustment in the rear

need to mount the tires on the beadlocks

take it out on something besides carpet

here a couple pics plus the flex shot

rmdesignworks · 11-14-2009, 03:56 PM

i put my front axle skidplate back on too,,0.125" 6061 T6 Aluminum

dieselfuel · 11-15-2009, 12:32 PM

i kinda like the skid idea. i might have to do something like that for my tuber

rmdesignworks · 11-15-2009, 01:12 PM

diesel,,,yeah the skid really helps if you like to bullnose your way up the side of a rock without bending stuff,,and it really stiffens the axle on the opposing angle,,it can interfere with some angles but ill take the trade off,,i have hit rocks at full throttle and only scratched the skid

rmdesignworks · 11-17-2009, 03:42 AM

well the tuber has sacrificed it's front shocks to my new comp chassis,,,gotta get some new one's for one of the two rigs,,but the comp chassis is bada$$ might have to leave it alone and wait for the new shocks for the tuber

shawkins · 11-19-2009, 03:18 AM

What wideners are those?

rmdesignworks · 11-19-2009, 01:04 PM

Quote:

Originally Posted by shawkins

What wideners are those?

Sorry man, i'm not sure,,they were on the truck when i got it,,,

rmdesignworks · 11-20-2009, 10:42 AM

hope this helps,,,heres the wideners at tcs,,, http://www.tcscrawlers.com/2.2-Wheel...g-p-16233.html

rmdesignworks · 11-22-2009, 01:54 AM

i got my front shocks back off of the comp rig so i should have the fronts back on this thing sometime today,,,hopefully get it on some rocks,,it is stupid light weight,,for testing though ill be using whe white rovers on my Eritex wheels from my comp rig,,help keep the cog low..plus having the added weight in the wheels should help get some wheels speed

rmdesignworks · 11-30-2009, 08:48 PM

well ive decided to sell this thing,,look for it in the F/S section

11-09-2009, 12:04 AM	#22
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	trusses front servo,battery,,esc truss,,,3 point mount rear truss....7 point mount 6061 T6 aluminum,,TLT uppers,,M3 hardware Attached Images

11-10-2009, 10:55 PM	#26
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	mock up well ya'll know how it is,,i couldnt wait til tomorrow to mock it up or take some pics,,,so are a few of how it sits,,steering link geometry etc,,without the skins and one with the skins,,im still working on the electronics placement,,,heres the pics Attached Images

11-12-2009, 10:36 PM	#29
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	here she is,, still have a couple things to button up but she's done for the most part need some slight link length adjustment in the rear need to mount the tires on the beadlocks take it out on something besides carpet here a couple pics plus the flex shot Attached Images

11-14-2009, 03:56 PM	#30
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	front axle skid i put my front axle skidplate back on too,,0.125" 6061 T6 Aluminum Attached Images

11-08-2009, 01:40 AM	#21
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	Hey Patric,,Thanks,,I'm not sure of the model or brand on the tuber itself,,,I got it in a trade with 1badxj,,,It's his fault I'm now a junky,,I do have more pics and I can take some close ups later in the A.M. when the sun comes up. any thing inparticular you wanna see?

11-09-2009, 07:48 PM	#23
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	oh yeah,,i got my delrin lnks from Shon tonight,,Thanks Shon,,very nice pieces,,,cant wait to get em hooked up,,or at the very least mocked up,,pics as soon as i get something done

11-09-2009, 09:31 PM	#24
R2j SORRCA Committee Member Join Date: Dec 2008 Location: Parkston, SD Posts: 4,523	Your welcome! Your not done yet?

11-10-2009, 07:25 PM	#25
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	well shon did a great job on the links but i have to trim them down a bit,,,i gave him long numbers to make sure i could get it right where i wanted it,,and im gonna relocate the rear uppers on the truss,,spread em out a little...pics tomorrow

11-12-2009, 02:57 PM	#27
Twisted Links Rock Stacker Join Date: Oct 2009 Location: Phoenix Posts: 77	Sweet Rig! I love the machine work for the diff pieces. I think it's called a truss? Just like full scale.

11-12-2009, 03:13 PM	#28
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	youre right they are called trusses,,the front is a 3 point servo mount truss and the rear is a 7 point truss

11-15-2009, 12:32 PM	#31
dieselfuel I wanna be Dave Join Date: Jan 2006 Location: Henderson/Las Vegas, NV Posts: 5,032	i kinda like the skid idea. i might have to do something like that for my tuber

11-15-2009, 01:12 PM	#32
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	diesel,,,yeah the skid really helps if you like to bullnose your way up the side of a rock without bending stuff,,and it really stiffens the axle on the opposing angle,,it can interfere with some angles but ill take the trade off,,i have hit rocks at full throttle and only scratched the skid

11-17-2009, 03:42 AM	#33
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	well the tuber has sacrificed it's front shocks to my new comp chassis,,,gotta get some new one's for one of the two rigs,,but the comp chassis is bada$$ might have to leave it alone and wait for the new shocks for the tuber

11-19-2009, 03:18 AM	#34
shawkins Newbie Join Date: Feb 2007 Location: Tigard Posts: 44	What wideners are those?

Sponsored Links

11-20-2009, 10:42 AM	#36
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	hope this helps,,,heres the wideners at tcs,,, http://www.tcscrawlers.com/2.2-Wheel...g-p-16233.html

11-22-2009, 01:54 AM	#37
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	i got my front shocks back off of the comp rig so i should have the fronts back on this thing sometime today,,,hopefully get it on some rocks,,it is stupid light weight,,for testing though ill be using whe white rovers on my Eritex wheels from my comp rig,,help keep the cog low..plus having the added weight in the wheels should help get some wheels speed

11-30-2009, 08:48 PM	#38
rmdesignworks I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope. Posts: 5,013	well ive decided to sell this thing,,look for it in the F/S section

RCCrawler Forums

Thread: 2.2 tlt axled tuber