The Eye "Mayhem LS2.0" Build
 

Well after receiving this great looking chassis my work picked back up and i have been forced to sit a dream about building my new shafty truck. Well finally the time have come to get to building.

So Mayhem thanks for producing this great looking chassis i love the fact that the builder can pick the different colors for each of the parts that go into the chassis. "thumbsup"

The Specs:

Chassis - Mayhem LS2.0 chassis
Axles - TLT Axles, fully loaded
Tranny - Axial tranny
Dig Unit - New HRD 3.1 Dig Unit by Eritex inc
Links - The TAG Line Delrin High clearance links
Shocks - Losi Crawler Shocks
ESC - Tekin FXR
Motos - Tekin 45t Hand wound
Servo - JR 8711
BEC - Castle Creations
Wheels - Mayhems Engineering Beadlocks
Tires - new Losi Comp Claws
Foams - Crwler1 memery foams
Battery - 3 cell lipo 1600 mah 25c Common Sense RC
Radio - Futaba 4PK

hmmmmmmmmmmmmm did I read links for the mayhem ls2.0, how much?:lol:

The chassis:

2 3/8" wide with plates
7 3/8" long tip to tip
3 1/4" tall at it's highest point

4 oz ..... with plates, skid, 2 stays and 8 screws

I like all of the adjustment places

Let me double check that i still like them once they are on the rig and i'll let you know "thumbsup"

can I see a picture of them?

I'm amazed by the craftsmanship of this skid plate. Every edge have been milled to perfection, i just had to take pictures "thumbsup"

the chassis is pretty sweet, i got the red but with white skid and all the machining is awesome:)

Just some random pictures of the chassis ............

You know what gos great with a Mayhem Chassis ?????? Mayhem Wheels ... now it is time to start building this beauty.

This should be fun to watch. I need to know what camera your using and what lens."thumbsup"

Aaron you'll love this chassis. yotachump did a great job designing this chassis. I have mine set up with tlt axles also. Let me know when you get some links made up.

dam that chassis is sick, and with those rims, dam that would make a great combo, chassis with matching rims

update?:roll:

ok, before I started putting it all together I wanted to compare chassis size. :shock: wow this thing is narrow

Well now it is time to figure out how to get it all in there.

Axial Tranny
HRD 3.1 Dig Unit by Eritex inc ..... Thanks for the great install thread "thumbsup"
Tekin 45t

looks great so far, cant wait for some action shots"thumbsup"

after mounting servo tray for the dig on the dig ;-)..... this dig unit sure was worth the wait, it is so small and the way it works makes such good sence.

ok, well ... time to figure out a new way to mount my servo for the dig. Here in the pictures you will see a HS645 i have also tried a HS225 mini servo. With where the servo sits within the chassis is will push the dig unit out of the chassis. :-( oh well I have a few idea that I plan on making tonight, so we will see.

Did you try different servo posts? Traxxas # 2715 or similar might push the servo over enough for clearance.

Edit: whatever you come up with, post it up, I've got the same parts coming and I don't want to have to think :lol: