Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Tamiya TLT Crawlers
Loading

Notices

Thread: tlt hex's and pins

Reply
 
LinkBack Thread Tools Display Modes
Old 05-19-2010, 08:47 PM   #1
Newbie
 
Join Date: Feb 2009
Location: glenpool
Posts: 9
Default tlt hex's and pins

HI, just picked up a custom tlt and it's missing the pins and hexes on the axles, i'm having a hard time locating these parts, can i use hexes and pins off of something else? Maybe axial? My other question is when you order links, is the measurement the length of the aluminum sleeve? Or the sleeve with the ends attached, like hole to hole? thanks
bgballin26 is offline   Reply With Quote
Sponsored Links
Old 05-19-2010, 09:03 PM   #2
I wanna be Dave
 
Join Date: Jan 2006
Location: Henderson/Las Vegas, NV
Posts: 5,032
Default

If you're ordering axial links, the length is just the rod its self. If they're labeled as 91mm or 109mm, they're referring to the length of the aluminum piece.

Yes you can use axial hexes, or mip, or rpm or any other for that matter. All the 12mm hexes out there are pretty much the same.
dieselfuel is offline   Reply With Quote
Old 05-19-2010, 09:33 PM   #3
Newbie
 
Join Date: Feb 2009
Location: glenpool
Posts: 9
Default

Ok thank you
bgballin26 is offline   Reply With Quote
Old 05-20-2010, 01:21 PM   #4
Quarry Creeper
 
Join Date: Mar 2006
Location: Lutz
Posts: 457
Default

You can use also the older Tamiya hexes off like a TA01,02,03 chassis also. Sometimes you can also find them the hexes in aluminum also. Just a little info.
ToTheMAXXcrawler is offline   Reply With Quote
Old 05-20-2010, 04:25 PM   #5
Newbie
 
Join Date: Feb 2009
Location: glenpool
Posts: 9
Default

Thanks, i ordered some hexes from an axial..I'm not real sure what chassis i have here, and i'm missing a driveshaft, which i can't find another one like it. After doing some reading i think i'm going to change over to a pede or axial tranny, i think parts might be easier to find if i do that. Any thaughts?

bgballin26 is offline   Reply With Quote
Old 05-21-2010, 12:27 AM   #6
I wanna be Dave
 
Join Date: Jan 2006
Location: Henderson/Las Vegas, NV
Posts: 5,032
Default

Kinda looks like an old junfac chassis. I don't know much of anything about them, but I know am axial trans would be your best bet.
dieselfuel is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 10:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com