Its all Unimogers fault, Now finished 5/2 I blame the fact that I now have another tlt on Ben :lol: j/k with ya Ben ;-) A while back I had gotten a hilux body/chassis and Ben inquired what I was doing with it, Well I decided that id rather have some a little bit more usable that wouldnt require as much time and effort ( considering I have 97 million other projects going on :roll: ) so we did a little swap and this is what I ended up with...A badass CJ 8 scrambler :mrgreen: http://img.photobucket.com/albums/v7...cj/cj-8001.jpg http://img.photobucket.com/albums/v7...cj/cj-8003.jpg http://img.photobucket.com/albums/v7...cj/cj-8004.jpg http://img.photobucket.com/albums/v7...cj/cj-8006.jpg http://img.photobucket.com/albums/v7...cj/cj-8002.jpg This is my 1st comp style rig, I wanted something scale but much more capable as far crawling goes and what better way then with a bulu 2:) I havent had much time to work on it, I had my stp dad mount the body for me( he is good as that stuff, and I cant afford to mess is up) and I install a Tekin 2 in it so far. Hopefully ill have it running by 2nite Specs... -Bulu 2 maxx links -non narrowed Moabs with cut foams and BBS :shock: yes thats right they are not narrowed :lol: and there wont be any wideners either...you will see why soon enough ;-) -black wheels with Bens rock rings which are AWESOME by the way -locked, shaved tlt axles with bearings -locked Pede trans -12 tooth 87 tooth gearing -cj-8 body painted on the outside in NEW conditon :mrgreen: -Tekin rebel 2 -JR 590z servo -Traxxas tq 3 radio...for now untill I can get another sysnthesized jr reciever -Tmaxx shocks Enjoy, also if you guys have any pointers on setting these things up, let me know, I am in new to the comp rigs :) although it seemed pretty damn good right out of the box :mrgreen: Thanx again Ben, I hope you like the lux as much as I like the cj Mike |
LUCKY! thats very nice bet it will outcrawl all your other rigs:lol: |
looks really good Mike, I tried to set it up as best I could for you, so you could just run it as is. I would pre-load the left rear shock a little to battle the mild torque twist, other than that it should be good to go. That body looks awesome on there. :mrgreen: |
Correct me if I am wrong. Isn't that a Bulu and not a Bulu 2? I could be totally wrong. lol |
no its a bulu 2 bulu 1's where more a solid peice of aluminum the bulu 2 is much lighter and better:mrgreen: |
Quote:
|
Quote:
Ohhh Okay! My Bad! It's a nice jeep regaurdless. Ben builds some great trucks..... Greg |
Very Nice! The whole layout looks good. |
Thanx for all the feedback guys, I plan on flat fendering it and removing the flares, it will also recieve a high lift jack when I get them from Ben, hopefully today :mrgreen: Mike |
Very nice looking Jeep mike... Bet it works great... |
looks great, kinda reminds me of the 2001 top truck challenge winner |
Well I finished up the CJ last night, everything is working and working great, I put an even better servo on the front, good ol' hitec ;-) . Only thing I dont really like is that reverse delay with the Tekin, I have it set to the 0-5 second mode but it seems closer to 5 then anything :roll: Other then it should be a great rig. Here are a few poser shots, showing off the flex and flat fendered, I also added some cool diamond plate :mrgreen: http://img.photobucket.com/albums/v7...cj/cj-8007.jpg http://img.photobucket.com/albums/v7...cj/cj-8008.jpg check out that custom built 2/3 cell pack;-) nice and small and with 1200 capacity and a 55 turn lathe I should get some reasonable run times :mrgreen: http://img.photobucket.com/albums/v7...cj/cj-8009.jpg http://img.photobucket.com/albums/v7...cj/cj-8010.jpg http://img.photobucket.com/albums/v7...cj/cj-8011.jpg Well thats about it for this build untill I get to run it, hopefully Ill get to take it to "the rock" and give it all its got in the next weekend or 2 I also worked on the Trekker last night :shock: Yea I pulled it off the back burner and mounted up the rear shocks and tonight I am going to make the brackets for the trans mount so then they trans will be mounted. After that Ill start the tube work :) -Mike |
Looking good :D Where did you pick up the diamond-plate effect vinyl? |
Parma makes diamond plate sticker sheets, I can get you the part # If you would like, send me a PM Mike |
Looks good Mike! Is that body painted on the outside? If not that is a pretty cool color, very flat! Also I have had quite a few setups with the bulu chassis, and I must admit they work best running low with some droop. Also you are going to love that battery, I loved the small cells so much I just ordered another pack from cheapbatterypacks.com with their new 1400 intellects. Cant wait to use it :) |
Quote:
Mike |
Bad place for a reciever's crystal! :shock: :lol: |
Quote:
Mike |
All times are GMT -6. The time now is 11:50 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com