Project "RAMROD" 1 Attachment(s) Here is a Sneak Peak of whats to Come! http://img74.imageshack.us/img74/2775/tmp40959bn.jpg Alright I sold my Extreme Nylint and many other things to build me a TLT tuber painted like my 1:1 Jeep. Here are all the parts I have coming in the mail right now. Jeep HPI body, TLT-1 kit, 2.2 Red Rocks, 65T motor, Stealth tranny and many extra parts for that, Revo Shafts, Bearing, MOPED ESC, 2.2 HPI Spike wheels, Blue bird Servo's, TQ3, rod ends, Shocks and many other little parts. So far I have near 400 bucks in just parts. I'm going to try to paint the panels to match my paint job. My TLT tuber will have a wheelbase of 12.3 to 13.5in. I haven't choose yet and 4 wheels steering. I'm 4 linking the front and 3 linking the rear. I don't think I will ever use it in a comp, but you never now. My Wheelbase will be chossen when my Red Rocks come in. I'll start posting more pic's when my parts come in the mail and things start getting put togother. A special thanks go out to Dezfan and Unimoger for they tech support and parts. I will have a parts list with numbers too. This should be a great build with alot of unique parts I will be making myself. It will also be a great how to guide to get different parts to work together right. I hope. |
pm me if you want a template to stencil that paint job. |
Quote:
Quote:
|
Cool man, nice 1:1, ill definitally be watching this build up, good luck man. |
thats a sweet 1:1, is that car just in your backyard to romp on? |
1 Attachment(s) Parts list. I will try to keep this updated though the building process. Moped ESC Blue Bird Servo's BMS-620 x2 HPI Spike Wheels 2.2's Narrowed 2.2 Red Rocks Custom Made Tube Chassis 3/16 Solid rod TQ3 mod'ed for 4WS Xtreme Axle ends Tobee Craft 32mm Wideners Alloy Knuckles TA-05 Top Cad's Stealth B4 tranny 65T Motor Revo DriveShafts with Maxx Yokes Cen Gensis Shocks shorten by 3/4 of inch Cutting board skidplate Xtreme uppper link/ servo mounts Xtreme bent lower links Part reused in the TLT-1 Kit Servo savers Axles (duh) steering links Misc. Nuts and bolts |
They are plastic. Will they not hold up? |
Thanks. Will do. I went with these b/c I bought two for the price for 1 hitec-645. Trying to save a little money. May need up costing me more in the long run. Only time will tell. |
1 Attachment(s) Well I got my axles put together last night. I didn't have any Loc-Tite. I have to tear it down later when my ball bearings come in. I just do everthing then. I did lock the gears up using hot glue. I even put my shocks together. Which I'm not even using. I should be getting all my parts within the next 2 weeks. I should get all the important parts to get this build going this week. :lol: |
Its nice to see that nylints brought u into this sport. Good work and keep us posted. |
why did you put them together if you knew you were going to be taking them apart right away? |
hey instead of loctite hey insead of locktite just turn one of your spider gears around, and put it between the other to spiders .walla your axles are locked .. |
I think you should get some J-Dawgs instead of the red rocks. That way you can cut them to look like the super swampers on your 1:1 Jeep. Just my 2 cents. |
I put my axles together b/c I couldn't wait. I had to do something. The J-Dawgs look cool but they are just to small. |
lol i just did the same thing but i built the whole thing. |
I would also get the TG-10 axels and use the wide spaced wheel hexes that come with the hpi wheels that you got. I would also use jato links in the front and revo in the rear (p3 poush rods on the bottom rear and tirods on the top.) |
2 Attachment(s) Well I got a little more done today. I made my templates for my top plate and bottom axle braces. On the top plate you can see where I'm mounting my top and lower links. These are just a mock up and everything will be one piece. I just got 15ft of brakeline, pipe cutter, and a few more tools and parts. Here is the basic design of my chassis. I know they are crappy pic's, but I did it at work and all I have is windows paint program. |
I just got my 2.2 Red Rocks in and my 65T motor. Man these Red Rocks are real soft. I was playing around with my Stealth Tranny and my Stock TLT parts. I used my Spur from the TLT kit and the Pinion also from the TLT kit. With the 65T motor it may just be low enough. I have already ordered different Spur and pinion anyway, but I want to try this set up first. |
They are soft, but I noticed a lot of bounce the way I cut the foams. I might have to get a softer foam for them. |
Well here are my 2.2 Red Rocks. You can see how much ground clearance they will give. I haven't got my Wheels in yet. http://memimage.cardomain.net/member...58_60_full.jpg Here is a pic showing the Stock TLT Spur gear and Pinion on the Stealth tranny. I don't know if it's low enough, but if it is. It may help out a few others and save a few bucks. http://memimage.cardomain.net/member...58_61_full.jpg http://memimage.cardomain.net/member...58_62_full.jpg It seems to be a Spur 83T and the Pinion 24T |
All times are GMT -6. The time now is 02:26 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com